Dyson V8 Absolute Manuale utente

User manual

SV12 JN.00000 PN.000000-00-00

00.00.00 VERSION NO.01

Contents

In the box

Getting started

Caring for your floors

Charging your machine

Emptying your bin

Cleaning your bin

Clearing blockages

Washing filter A

Washing filter B

Clearing obstructions from your

Motorbar™cleaner head

Clearing blockages from your

Hair screw tool

Washing your Fluffy™cleaner head

brush bar

Cleaning your tools

Looking after your machine

click

The Dyson machine

with the bin, wand and

cleaner head.

Dyson V8 logo

Motorbar™cleaner head

De-tangling vanes

automatically clear

wrapped hair from the

brush bar as you clean.

In the box

Your machine will come with one or more of these

cleaner heads – not all will be included.

Vacuum cleaner

Charger

Charges your vacuum

with or without a dock.

Wall dock

The Dyson cordless

vacuum drops into the

wall-mounted charging

dock, ready for your

next clean.

Wand

Crevice tool

Engineered for precise

cleaning around tricky

edges and into hard-to-

reach narrow spaces.

Two tools in one –wide

nozzle and brush,

for quick switching

between cleaning and

dusting tasks around

your home or car.

Combination tool Hair screw tool

De-tangling conical

brush bar spirals hair

off and into the bin.

Motor-driven cleaning

for smaller spaces.

Some tools may not be included.

You can buy additional tools at www.dyson.com.

Fluffy™cleaner head

Soft woven nylon removes

large debris, while

anti-static carbon fiber

filaments extract fine

dust from hard floors.

Soft dusting brush

Enclosed in a skirt

of soft nylon bristles

for gentle, vacuum-

assisted dusting of

delicate objects

and surfaces.

Fabric and

mattress tool

Removes dust, dirt

and allergens from

mattresses and

upholstery.

Mini motorized tool

Motorized brush bar,

concentrated in

a smaller head to

remove stubborn

dirt from mattresses,

upholstery and stairs.

Stubborn dirt brush

Stiff nylon bristles

dislodge ground-in dirt

from coarse carpets,

high traffic areas and

car interiors.

Extension hose

Adds up to 24 in of

flexible reach to any tool

attachment, to clean up

high or down low in your

home or car.

Main body

showing the

handle and

bin attached.

A brush bar located inside

the cleaner head and

a suction control slider

located on the front.

A rectangular dock that

needs to be fixed to

a wall with screws.

The charger is a one

piece unit with the plug,

connector end and cable.

The narrow connector end at the top, this connects to the bin

and the wider end at the bottom that connects to the cleaner

head or tool.

A long tool

with an

angled end.

This tool has

a combination

of brush head

and crevice tool

together in one

unit. The brush

head slides down

the crevice tool

when needed.

A small cleaner head

with an angled body

housing the motor and

an electrical connector

to attach to the wand or

directly to the machine.

A soft fluffy brush bar

housed within the

cleaner head. There is

an electrical connecter

end that can attach to

the end of the wand or

directly to the machine.

Pliable bristles and

felt bumper strip on

a narrow, tapered tool.

A wide,

triangular

shaped

nozzle.

A small cleaner head

with a body housing the

motor and an electrical

connector to attach to

the wand or directly to

the machine. A short nozzle with

stiff bristles on the

underside.

A flexible hose

engineered from

tough wire and

durable plastic.

Getting started

Pull trigger to start cleaning

Two power modes

Toggle between Powerful mode – for

longer suction – and MAX mode, for

stronger suction. Just hold down the

trigger and slide the control back

and forth.

Switch accessories quickly

The quick-release tools click into place,

and release in moments by simply

depressing the release switch.

Clean awkward spaces

Remove the wand and connect your

chosen tool directly to the inlet pipe

to use the vacuum as a handheld.

click

Motorbar™cleaner head

De-tangling vanes

automatically clear

wrapped hair from the

brush bar as you clean.

Pointers to demonstrate

that the tools can be

connected directly to the

main body or to the end

of the wand.

Diagram showing the

connection of the wand

onto the main body,

with the wand release

button aligned with the

top of the main body.

The power mode button is located

on the top of the machine between

the bin and filter. Slide to the left for

powerful cleaning and to the right

for max mode.

A brush bar located inside the

cleaner head and a suction

control slider located on the front.

Caring for your floors

Check that the underside of the cleaner head or tool is clean and free from

any objects that may cause damage.

Before vacuuming your flooring, rugs, and carpets, check the manufacturer’s

recommended cleaning instructions.

The brush bar on your machine can damage certain flooring. Some rug

materials may fuzz if a rotating brush bar is used when vacuuming. If this

happens, we recommend vacuuming without the motorized floor tool and

consulting with your flooring manufacturer.

5 hrs

click

Battery LEDs

Charging LEDs

During use, high charge.

Charging, low charge.

Charging, medium charge.

Charging, nearly full.

Fully charged.

Battery fault.

Charger fault.

During use, medium charge.

During use, low charge.

Empty.

4.5 hrs4.5 hrs

5 hrs

click

5 hrs

click

5 hrs

click

5 hrs

click

5 hrs

click

Charging your machine

Fully charge your machine before your first use. Connect to charger either

directly or in the dock.

A full charge will take approximately 4.5 hours. While your battery

is charging, the LEDs will flash with the current level of charge.

These lights will turn off once your machine is fully charged.

clik

click

One light flashing

alternately red and blue.

Two flashing blue lights on

the side of the battery.

No lights illuminated on

the side of the battery.

Three flashing blue lights

on the side of the battery.

One flashing blue light on

the side of the battery.

One flashing red LED.

All LEDs lit with

a solid blue light.

Two LEDs lit with

a solid blue light.

One LED lit with

a solid blue light.

One blue LED flashing.

The LED lights

are located on

the side of the

battery unit.

The charger connected

from the power supply

using the wall dock.

Insert the charging cable into the charging point at the back of

the vacuum, at the bottom of the handle. Plug the cable into

a wall socket to begin charging.

clik

Emptying your bin

Empty as soon as the dirt reaches the MAX level – don’t overfill. Using your

machine when the dirt is above the MAX line may affect the performance

and require more frequent filter washing.

Close the bin

Push down on the cyclone until it slides into position.

Push the bin base upwards until it closes securely.

Cover your bin tightly in a dustproof bag while you empty. Remove the bin

carefully, seal the bag tightly and dispose.

Remove the wand from your machine.

Hold your machine over the bin and pull the bin release catch upwards.

The cyclone will slide up and the bin base will open.

Release the dirt

Minimize dust contact

clik

click

The bin release catch

is located on the top

of the cyclone where it

joins the main body of

your machine.

The MAX mark on the bin

of the machine, showing

that the dirt should not be

filled over the Max mark

when the machine is at

the angle of normal use.

click

Empty your bin as soon as the dirt reaches the MAX mark.

You may need to clean the filter more often if you use your machine

with a full bin.

Cleaning your bin

Remove the wand from your machine.

Hold your machine over a bin and pull the bin release catch upwards.

The cyclone will slide up and the bin base will open.

Empty your bin

Pull the bin release catch upwards. The cyclone will slide up and the bin base

will open.

Locate the cyclone release button behind the cyclone and push to remove the

cyclone from your machine.

Remove the cyclone

Pull back on the red catch located on the base, slide the bin down and pull it

off your machine.

Remove the bin

Wipe your bin with a damp, lint-free cloth. Don’t put the bin in a dishwasher

or use detergents, polishes or air fresheners.

Make sure the bin is completely dry before replacing.

Clean the bin

Align the tabs on the bin with the grooves on the main body and slide it

upwards until it clicks into place.

Replace the bin

Slide the cyclone into the grooves of the main body and push down until it is

in position.

Push the bin base up until it clicks firmly shut.

Replace the cyclone

The cyclone release

button is located on

the main body and is

visible once the bin

release button has

been activated. The

button to remove the

bin is located on the

bottom of the handle.

Clearing blockages

Disconnect your machine from the charger before looking for blockages.

Be careful not to touch the trigger and be aware of sharp objects.

Leave your machine to cool down before looking for blockages.

Don’t use your machine when looking for blockages as this could cause injury.

Your machine is fitted with an automatic cut-out. If any part

of it is blocked, your machine’s motor will pulse and won’t

function until the blockage has been cleared.

With the wand

removed from the

machine, check for

blockages at both

ends of the wand.

Lift the filter out of the top of the cyclone.

Tap to remove excess dust and debris.

Align the arrow on the top of the filter with the bin release button.

Push down to fit securely in place.

Washing filter A

Wash your filter

Dry your filter

Reassemble your machine

Remove your filter

Leave your filter to dry for at least 24 hours in a well-ventilated, warm place.

Do not dry your filter in a tumble-dryer or near a naked flame.

Important: your filter must be completely dry before you put it back into the

machine. Your machine could be damaged if used with a damp filter.

Hold the open end of the filter under a running tap, until the water runs clear.

Turn the filter upside down and tap it to remove excess water.

Run water over the outside of the filter until the water runs clear.

Squeeze and twist with both hands to make sure the excess water is removed.

The filter has a top with

five arms that fit onto

the cyclone body.

The filter will only fit

correctly if the arms

are aligned and the

arrow on the top is

pointing towards

the main body of

the machine.

Twist off your filter

Wash your filter

Shake out the water

Twist your filter counter-clockwise and pull it away from your machine.

Place your filter on your machine, aligned in the open position.

Twist clockwise until it clicks securely into position.

Washing filter B

Dry your filter

Leave your filter to dry for at least 24 hours in a well-ventilated, warm place.

Do not dry your filter in a tumble-dryer or near a naked flame.

Important: your filter must be completely dry before you put it back into the

machine. Your machine could be damaged if used with a damp filter.

Reassemble your machine

Wash the inside of the filter under cold, running water, rotating the filter to

make sure all the inside is clean.

Repeat until the water runs clear.

Empty the filter and shake firmly to remove excess water.

Keep shaking it until there’s no water coming from the filter.

Place your filter, with the open end facing up, to dry.

The filter is placed

under the tap with the

water flowing into the

open end of the filter.

Altri manuali per V8 Absolute

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Aspirapolvere popolari di altre marche

Bissell

Bissell LittleGreen Proheat 1425 Series Manuale utente

Panasonic

Panasonic MC-YL637S147-AE Manuale utente

NEFF

NEFF N17XH10 0 Series Manuale utente

LG A9 Series Manuale utente

Oreck

Oreck Cordless Captura BK51700 Series Manuale utente

Kogan

Kogan KAVACROBVWA Manuale utente

Kränzle

Kränzle VENTOS 50 ID Guida utente

EVVO

EVVO Ai35 Manuale utente

DeWalt

DeWalt DWH200D Manuale utente

Pontec

Pontec Pondomatic Vacuum Cleaner Manuale utente

Cleanmaxx

Cleanmaxx PC-P007E Manuale utente

Exido

Exido 240-114 Manuale utente

RIDGID

RIDGID WD1685AU0 Manuale utente

Ezviz

Ezviz RE4P Manuale utente

STG global

STG global TANVAC HDV3000 Manuale utente

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Manuale utente

Factory

Factory M3340 Manuale utente

Shop-Vac

Shop-Vac VN92 SERIES Manuale utente