e-con Systems See3CAM 130 Manuale utente
See3CAM_130
Version 1.11
e-con Systems
5/28/2018
e-CAMView Streaming Application
User Manual
© Copyright e-con Systems. 2017. All rights reserved. 1
Disclaimer
The specifications of See3CAM_130 camera board and instructions on how to
connect this board with PC are provided as reference only and e-con Systems
reserves the right to edit/modify this document without any prior intimation of
whatsoever.
2 e-CAMView Streaming Application User Manual
Contents
INTRODUCTION TO SEE3CAM_130 4
PREREQUISITES 4
DESCRIPTION 5
USING E-CAMVIEW 7
DEVICES MENU 7
OPTIONS MENU 8
VIDEO CAPTURE FILTER 9
VIDEO CAPTURE PIN 15
STILL CAPTURE PIN 15
FREEZE FRAME 16
FIT TO WINDOW 16
CAPTURE MENU 16
EXTENSION UNIT MENU 17
SCENE MODES 19
SPECIAL EFFECT 20
DE-NOISE 21
BURST SIZE 22
AUTO FOCUS 22
ROI MODE 22
AUTO EXPOSURE 23
IHDR 25
Q-FACTOR 26
FOCUS WINDOW RECTANGLE 26
RESTORE DEFAULT 26
FLIP 27
STREAM MODE 27
FACE DETECTION 27
SMILE DETECTION 27
FRAME RATE CONTROL 28
EXPOSURE COMPENSATION 28
GETTING THE UNIQUE ID OF THE CAMERA 29
HELP MENU 31
TROUBLESHOOTING 32
FAQ 32
WHAT’S NEXT? 38
4 e-CAMView Streaming Application User Manual
Introduction to See3CAM_130
The See3CAM_130 is a 13 Megapixel, color, UVC compliant, USB 3.0 SuperSpeed
camera from e-con Systems, a company with over two decades of experience in
designing, developing, and manufacturing OEM cameras. The See3CAM_130 is the
latest member of the See3CAM family of USB 3.0 SuperSpeed camera products
launched by e-con Systems.
The See3CAM_130 is a 13 Megapixel camera that is based on the 1/3.2” AR1335
CMOS image sensor from Aptina™with Autofocus lens. The See3CAM_130 is also
backward compatible with the USB 2.0 High Speed interface, albeit at lower frame
rates.
The See3CAM_130 is UVC compliant camera and it does not require any drivers to
be installed on the PC. The native UVC drivers of Windows and Linux Operating
Systems (OS) will be compatible with this camera. e-con Systems also provides the
sample application that demonstrates some of the features of this camera.
However, this camera can utilize any DirectShow application such as Skype and so
on.
e-con Systems provides a sample DirectShow application, called e-CAMView, along
with the See3CAM_130 camera. e-CAMView is a typical DirectShow camera
application but customized to demonstrate some of the features of See3CAM_130.
This document describes the special features of sample camera application when it
is used with See3CAM_130.
Prerequisites
The steps to initialize the device with the host computer are as follows:
•Connect the one end of USB 3.0 cable to the USB 3.0 connector provided at the
back of See3CAM_130.
•Connect the other end of USB 3.0 cable to the USB 3.0 host controller on the
computer.
Once connected, the LED light on the device will glow indicating that See3CAM_130
is powered up and ready to use.
As See3CAM_130 is a generic USB Video Class device, Windows will automatically
detect all the drivers and the drivers will be installed. This happens for the first time
and from the second time onwards the device will be detected immediately by the
host PC and will be ready for use.
© Copyright e-con Systems. 2017. All rights reserved. 5
To view the preview, the e-CAMView application designed for See3CAM_130 must
be installed. Refer to the e-CAMView Streaming Application Installation Manual to
know more on how to install the e-CAMView application.
Description
The See3CAM_130 is a USB 3.0 color camera capable of streaming the resolution
and frame rates as shown in below table.
Table 1: See3CAM_130 Resolution and Frame Rates with FOV Crop
Format
Resolution
Frame Rate
% Crop in FOV
USB 3.0
USB 2.0
Horizontal
Vertical
UYVY
VGA (640 x 480)
120 fps and
60 fps
60 fps and
30 fps
0%
0%
720P (1280 x 720)
60 fps and
30 fps
16 fps and
8 fps
0%
24.14%
960P (1280 x 960)
60 fps and
30 fps
12 fps and
6 fps
0%
0%
1080P (1920 x 1080)
60 fps and
30 fps
8 fps and
4 fps
0%
24.14%
1440P (1920 x 1440)
45 fps and
22.5 fps
6 fps and
3 fps
0%
0%
4K UHD (3840 x
2160)
15 fps and
7.5 fps
2 fps
0%
24.14%
2.8K (2880 x 2160)
20 fps and
10 fps
3 fps
0%
0%
4K Cinema (4096 x
2160)
15 fps and
7.5 fps
2 fps
0%
28.88%
13MP (4208 x 3120)
9 fps and
4.5 fps
1 fps
0%
0%
MJPEG
VGA (640 x 480)
120 fps
120 fps
0%
0%
720P (1280 x 720)
60 fps
60 fps
0%
24.14
960P (1280 x 960)
60 fps
60 fps
0%
0%
1080P (1920 x 1080)
60 fps
60 fps
0%
24.14
1440P (1920 x 1440)
60 fps
60 fps
0%
0%
4K UHD (3840 x
2160)
30 fps
30 fps
0%
24.14
2.8K (2880 x 2160)
30 fps
30 fps
0%
0%
4K Cinema (4096 x
2160)
30 fps
30 fps
0%
28.88
13MP (4208 x 3120)
20 fps
20 fps
0%
0%
For streaming MJPEG, use MainConcept-MJPEG codec package. Find the installer in
the install path C:/Program Files (x86)/e-con_Systems/e-CAMView and install a
demo version of the codec by selecting ignore for demo version while prompted.
Note: The above frame rates are subject to change with lighting of the surroundings,
different renderers and PC configuration. The above table is true only in manual
exposure, when the exposure value is changed above -6 (15.6 milliseconds) there
6 e-CAMView Streaming Application User Manual
will be a drop in the frame rate because the exposure time is more than the frame
time. In auto exposure, maximum frame rate could be achieved with maximum
lighting.
The camera controls of See3CAM_130 are as follows:
•Brightness
•Contrast
•Saturation
•Sharpness
•Gamma
•White Balance (both manual and automatic)
•Gain
•Zoom
•Focus (both manual and automatic)
•Exposure (both manual and automatic)
•Pan
•Tilt
This document explains the following sections:
•Selecting the supported preview resolutions.
•Selecting the still image resolution.
•Capturing still images.
•Using supported controls.
•Getting the Unique ID of the camera.
The Field of View (FOV) of See3CAM_130 is shown below.
Figure 1: FOV of See3CAM_130
© Copyright e-con Systems. 2017. All rights reserved. 7
Using e-CAMView
This section describes how to use the e-CAMView application.
To launch the e-CAMView video streaming and capture application, click Start > All
Programs > e-con Systems > e-CAMView.
This version of e-CAMView is provided with a set of features that can be used to
attain the full functionality of See3CAM_130. The Menu bar at the top contains
menu items and the Status bar at the bottom shows related information. When the
application is running, the current preview resolution and the frame rate are
displayed in the Status bar as shown below.
Figure 2: Application Launch Appearance
The following sections describe each of the menu items in detail.
Devices Menu
You can click the Devices menu to view the currently connected video devices to
host PC and you can select any video devices attached to the computer. A check
mark is placed before the device indicating the video device which is currently
streaming. By default, the See3CAM_130 device will be indicated by the name
See3CAM_130. The See3CAM_130 camera being listed in the Devices menu is
shown below.
8 e-CAMView Streaming Application User Manual
Figure 3: Enumerated Devices List
In case any other video device such as on-board webcam is connected, e-CAMView
will list down those video capture devices and you can switch between the available
video capture devices, by selecting the respective device.
Note: There is no audio capture source available with the See3CAM_130 camera.
Options Menu
You can click the Options menu to select the various preview, image resolutions and
the controls that are supported by See3CAM_130. When you click the Options
menu, you can view the options listed in the Options menu as shown below.
© Copyright e-con Systems. 2017. All rights reserved. 9
Figure 4: Options Menu
From this Options menu, you can select the following options:
•Video Capture Filter - to change brightness and exposure values.
•Video Capture Pin - to select various video preview resolutions supported by the
device.
•Still Capture Pin - to select various still image resolutions supported by the
device.
•Freeze Frame - to pause the live preview.
•Fit To Window - to resize the preview to e-CAMView window.
The details of each of these options are described below.
Video Capture Filter
You can click the Video Capture Filter option of the Options menu to configure some
of the camera parameters of See3CAM_130 camera. When you click the Video Proc
Amp tab in the Properties dialog box, you can view the controls that are available in
the Properties dialog box as shown below.
Altri manuali per See3CAM 130
2
Indice
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
