E-data AR402 Manuale utente

AR402 Administration

AR402 FINGERPRINT KEY

Manual Version 1.6

e-DATA GmbH

AR402 Administration

e-DATA GmbH

Mollenbachstrasse 19

D-71229 Leonberg

Phone (0 71 52) 93979-0

Fax (0 71 52) 93979-50

info@de.e-DATA.com

AR402 Manual

Version 1.5

Firmware 1.717 or higher

This Manual is protected by copyright. The user manual may only be

copied within the framework of the intended usage. Any reproduction

or translations of the manual beyond this or its transmission onto

electronic media, even in extract form, is only allowed with the

express permission of e-DATA GmbH.

e-DATA GmbH reserves the right to make changes to the user

manual and to the devices without special notice.

e-DATA GmbH does not accept any liability whatsoever for direct or

indirect damage, especially loss of data, that results from the usage of

the AR402 terminal, or from the information in this Manual

AR402 Administration

Content

1General Comments 5

1.1 Symbols .....................................................................................5

1.2 Device name ..............................................................................6

1.3 Intended Usage.......................................................................... 6

1.4 Protection Class.........................................................................6

1.5 Safety Measures ........................................................................ 6

1.6 Before Commissioning...............................................................6

1.7 Operation ...................................................................................8

1.8 Installation and Service..............................................................8

1.9 CE Conformance .......................................................................8

1.10 FCC Conformance .....................................................................9

2Technical Data 10

2.1 Mechanical Structure ............................................................... 10

2.2 Hardware Features .................................................................. 10

2.3 Biometric Sensor...................................................................... 10

2.4 Visual and Audible Indicators...................................................10

2.5 Connection...............................................................................10

2.6 Interface ................................................................................... 10

2.7 Power Supply...........................................................................11

2.8 Environment Conditions........................................................... 11

2.9 Dimensions and Weight ...........................................................11

2.10 Cable Specifications ................................................................11

3Installation 12

3.1 Installation Requirements ........................................................ 12

3.2 Condition..................................................................................12

3.3 Wiring.......................................................................................12

4Operation 13

4.1 View of the Control Elements................................................... 13

4.2 Basics ......................................................................................14

4.3 Basic Operating Principles....................................................... 14

4.4 User Operation.........................................................................15

AR402 Administration

4.4.1 Authentication, AR402: ............................................................15

4.4.2 Authentication, AR402-smart card type: ..................................15

4.4.3 Authentication, 'Template on Card' (AR402-smart card type

only) .........................................................................................15

5Wiegand Configuration - Administrator Functions 16

5.1 Change the Admin Code.......................................................... 16

5.2 Enrollment................................................................................ 17

5.2.1 Enroll user................................................................................17

5.2.2 Write Template onto smart Card (AR402-smart card reader type

only) .........................................................................................18

5.3 Define the Number of Digits for the User ID (optional) ............19

5.4 Enable Validation of the User ID (optional).............................. 19

5.5 Delete Specific User(s) ............................................................20

5.6 Delete Entire Database............................................................ 20

5.7 Select iCLASS Mode (AR402-iCLASS only)............................ 21

5.8 Define Facility Code................................................................. 22

5.9 Choose 37-bit or 26-bit Format ................................................ 22

5.10 Reset - Manually switch to Wiegand mode.............................. 23

5.11 Reset - Manually switch to RS485 mode ................................. 23

6RS485 Configuration with NEXTOR Series Access Controller 24

6.1 Status Indication ......................................................................24

6.2 Allocation of IDs on the NEXTOR Series Access Controller.... 24

7Maintenance 25

7.1 Customer Service .................................................................... 25

7.2 Repairs.....................................................................................25

7.3 Warranty, Limitation on Liability to Third Parties...................... 25

Caution: 25

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate this equipment. 25

8Datasheet 26

Appendix 27

8.1 Quick Guide to Admin Functions .............................................27

AR402 Administration

8.2 Allocation of the Cable ............................................................. 28

1 General Comments

1.1 Symbols

The following symbols have been used in this manual:

Helpful tips and special characteristics of the AR402.

Careful

Possible danger, which – if the warning is not observed – can

result in damage to property, or slight to moderate bodily injury.

Caution

Possible danger, which - if the warning is not observed - can

result in death or serious bodily injury.

AR402 Administration

1.2 Device description

This device exists to identify persons by means of their

fingerprints and / or the contents of a smart card and / or a

personal number to be entered.

The human interface is implemented by a keyboard and a

beeper and several multicoloured Leds.

The device is connected to superordinated data processing

systems by a RS485 data line

1.3 Device name

This manual outlines the AR402 and the supported functions.

1.4 Intended Usage

The device may only be used under conditions and for

purposes for which it has been designed.

(See Chapter Environment Conditions)

1.5 Protection Class

The device conforms to the conditions of protection class IP65.

Protection class III EN60950-1.

Protection class IP65 DIN EN 60529

1.6 Safety Measures

The device has been built according to the current and

recognized technical safety rules EN60950-1 and left our

manufacturing facility in perfect condition. Improper handling

and operation outside the specified conditions can result in

dangers due to electrical current. This can endanger the lives of

persons and damage the device.

1.7 Before Commissioning

Inspect the device for visible damage resulting from shipment

or improper storage. Do not commission a damaged device.

Careful

The device may only be operated with DC voltage 12 to 24V DC.

The device is protected against polarity reversal.

AR402 Administration

1.8 Operation

Do not subject the device to any mechanical stresses such as

impacts, violent shaking or heavy loads. Impacts and shaking

can damage the electronics.

1.9 Installation and Service

The device may only be opened by trained specialists.

Disconnect the device from the power source before opening.

• You may only perform repairs in collaboration with e-

DATA GmbH.

1.10 CE Conformance

This device is manufactured according to the safety

requirements of EN 60950.

Safety of electrical equipment

• European Norm EN 60950

This device complies with interference resistance criteria

according to EN 55022; EN 61000-3-2/-3; EN 55024

AR402 Administration

1.11 FCC Conformance

This device complies with interference resistance criteria

according to FCC Rules 47 CFR Part 15 – Subpart C Section

15.209

NOTE: This equipment has been tested and

found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses and can radiate

radio frequency energy and, if not installed and

used in accordance with the instructions, may

cause harmful interference to radio

communications. However, there is no guarantee

that interference will not occur in a particular

installation. If this equipment does cause harmful

interference to radio or television reception,

which can be determined by turning the

equipment off and on, the user is encouraged to

try to correct the interference by one or more of

the following measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the

equipment and receiver.

— Connect the equipment into an outlet on a

circuit different from that to which the

receiver is connected.

— Consult the dealer or an experienced

radio/TV technician for help.

AR402 Administration

2 Technical Data

2.1 Mechanical Structure

• Plastic body + metal wall mount panel

• Resin sealed electronics

• 12 inch cable molded into body

2.2 Hardware Features

• Fingerprint biometric sensor

• MIFARE,DESFire,iCLASS- reader

• 12-key Keypad

• Beeper

• 4 red/green LEDs

• Keyboard illumination

• 3 Opto-Inputs

• Wiegand output

• RS485 host interface

2.3 Biometric Sensor

• Thin optical sensor

• 500 dpi @ 8 bit per pixel

• Active area: 0,5 x 0,9 in

• Template size: 130...250 bytes

• Memory: 1000 templates (optionally 6000)

2.4 Visual and Audible Indicators

• 4 red/green LED user interface

• Beeper (3khz)

2.5 Connection

• Cable with 11 circuits

2.6 Interface

• RS485 interface, 19200 Baud (8/N/1)

• Wiegand Output

• 3 Opto-inputs, active

Indice

Manuali Sistema di interfono popolari di altre marche

Bticino

Bticino LINEA 3000 Manuale utente

MSI

MSI MSI-140 Manuale utente

golmar

golmar Stadio Plus Manuale utente

CyberData

CyberData 011211 series Manuale

Vidos

Vidos duo M1021 Manuale utente

Vimar

Vimar ELVOX 7539/E Manuale utente

SSS Siedle

SSS Siedle BTSV 850-03 Manuale utente

Dahua

Dahua VTO Series Manuale utente

Elvox

Elvox 5651 Manuale utente

Videx

Videx VIDEOKIT Series Manuale utente

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuale utente

Viking

Viking E-35-EWP Manuale utente

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuale utente

SSS Siedle

SSS Siedle BFCV 850 Series Manuale utente

GRD

GRD MAX V2 Manuale utente

Alecto

Alecto ADI-250 Manuale utente

Aiphone

Aiphone IE-8MD Manuale utente

Perel

Perel EDB4 Manuale utente