E2S D1*CP1-PS Series Manuale utente

D1xCP1-PS SERIES

EXPLOSION PROOF MANUAL PULL STATIONS

The D1xCP1-PS Series of Explosion Proof Manual Pull Stations is UL and FM listed for use in

hazardous environments, and for Nema Type 4X weatherproof applications. The unit also complies

with ADA standards when installed at less than 48 inches above the floor for front wheelchair access,

and less than 54 inches for side wheelchair access. All Installations must comply with local codes and

regulations.

Ratings: Listed By: UL, FM, CSFM, MEA

Enclosure: Class I, Groups B, C, and D. Class II, Groups E, F, and G. Class III.

NEMA 4X (Weatherproof), MARINE.

Contacts: D.P.D.T 10 Amps, 120 VAC

1 Amp, 30 VDC

Installation:

(Please refer to assembly diagram and installation notes on the back side)

The D1xCP1-PS model station includes a front housing, a back box, a switch plate, and all the

necessary hardware to assemble the station.

•Install the back box onto its mounting surface using the 4 holes provided on the mounting tabs. The

tabs are designed to accept a screw size of up to 1/4".

•The back box is supplied with two 3/4"-14 NPT conduit entries. Threaded joints between conduit and

back box must be made with a minimum of 5 threads fully engaged. Seal unused conduit entry with a

UL listed close-up plug for use in the hazardous locations listed above in the ratings section. Joint

sealing material may be used if it is a non-drying slushing compound, petroleum jelly or soap-thickened

mineral oil.

•Connect the field wiring to the terminal blocks on the adaptor plate. Use the insulated terminal lug

supplied to ground the box properly. Each wire or terminal lug must be placed under its corresponding

clamping plate for proper connection.

•Install the switch plate onto the back box using the 4 1/4-20x7/8 pan head screws provided. Make

sure that the o-ring seals on the screws and around the edge of the switch plate are properly seated.

•Open the front housing, align its mounting plate with the pins provided on the switch plate and attach

it using the two 6-32 screws provided into the slotted holes.

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente