Eagle KEE E15 Manuale utente

E15 SPRAYER Operators Manual

KEE E15 Horticultural Sprayer Console

W117 V1.0

V 3.0 100903

Major Topic Heading

How to use this operator’s manual

As with any computer operated equipment, software and/or hardware is in many cases changed

and upgraded over the life of the equipment.

KEE Technologies software engineers are constantly working on software enhancements which

will provide you with many additional benefits and features in the future.

The EAGLE System will keep on evolving! ...to ultimately improve your ‘bottom line”!

KEE Technologies personnel have records of all changes implemented to your system with the

subsequent serial number.

When talking to KEE Technologies Support staff, always have this manual with you, as we may

ask you what version manual you are currently looking at to ensure we all talk the same

language. For this purpose all pages are coded as follows.

Page number Date when written Software version

Below is space provided to keep records of any software and hardware upgrades you may have

received.

The Software Version Number of the Eagle Console can be located when the console first powers

up. The File name which contains the Software version number will be displayed for about 2-3

seconds.

The name of the file will be on the last line, it will look like this.

KEE_HSC_1_0_13.HEX

Where: KEE_HSC_ -shows the type of software, is a KEE Horticultural Sprayer Complete.

1_0_13 - The software version number

HEX - Type of file.

Type of upgrade (software or hardware) Version Date Manual upgraded

KEE Eagle E15 Horticultural Sprayer 1.0.13 11/05 11/05

V1.86 V 1.86

3.0 SPRAYER SETUP MENU

3.1 SET THE PRESET RATE 1 20

3.2 SET THE PRESET RATE 2 20

3.3 MINIMUM FLOW HOLD 20

3.4 SET THE PRESET ROW WIDTH AND SECTIONS WIDTHS 21

3.5 SET THE LOW SPEED SHUT OFF 23

3.6 SET THE TANK VOLUME 23

3.7 APPLICATION MODE 23

3.8 SET THE WHEEL CALIBRATION FACTOR 24

3.8.1 SELECT SPEED SOURCE 25

3.8.2 AUTOMATIC WHEEL CALIBRATION 25

3.8.3 MANUAL ENTRY OF WHEEL FACTOR 25

3.9 SET THE FLOW CALIBRATION FACTOR 26

3.9.1 AUTOMATIC FLOW CALIBRATION 27

3.9.2 MANUAL FLOW CALIBRATION 27

3.10 SPRAYER SETUP 2 MENU 28

3.11 SET A MANUAL SPEED 29

3.12 SET RATE INCREMENT 29

3.13 SET NUMBER OF BOOM SECTIONS 29

3.14 ENABLE DATA LOGGER 30

3.15 ENABLE FLUSH OUTPUT 30

3.16 SET FLUSH TIME 30

3.17 ENABLE FULL ROW PER SECTION 31

3.18 ENABLE AUXILIARY FUNCTION 31

3.19 SPRAYER SETUP 3 MENU 32

3.20 ENABLE PUMP SPEED SENSOR 33

3.21 ENABLE AUXILIARY SHAFT SENSOR 33

3.22 ENABLE DUMP OVERRIDE 33

3.23 SELECT DUMP MODE 34

3.24 SET THE VALVE TYPE 34

3.25 SET THE CONSOLE UNITS 34

3.26 ENABLE FAN MONITORING 35

3.27 SET NUMBER OF FANS 35

3.28 SPRAYER SETUP 4 MENU 36

3.29 ENABLE PRESSURE1 SENSOR 37

3.30 SETTING THE PRESSURE GAIN 37

3.31 SETTING THE TYPE OF PRESSURE SENSOR 37

3.32 PRESSURE SENSOR 1 CALIBRATION 38

Content Page No.

Table of Contents

1.0 MENU OVERVIEW 11

2.0 CONSOLE OVERVIEW 12

2.1 WORKING SCREEN DISPLAY 12

2.2 WORKING SCREEN BUTTON FUNCTIONS 14

2.3 MAIN MENU 17

2.4 SETUP MENU 18

V 1.0 11/05

4. ALARMS SETUP MENU 40

4.1 RATE ALARMS 41

4.1.1 ENABLE THE MINIMUM FLOW ALARM 42

4.1.2 ENABLE THE APPLICATION RATE LOW ALARM 42

4.1.3 SET THE APPLICATION RATE LOW POINT 42

4.1.4 ENABLE THE APPLICATION RATE HIGH ALARM 43

4.1.5 SET THE APPLICATION RATE HIGH POINT 43

4.2 SHAFT ALARMS 44

4.2.1 ENABLE THE PUMP SPEED LOW ALARM 45

4.2.2 SET THE PUMP SPEED LOW ALARM POINT 45

4.2.3 ENABLE THE PUMP SPEED HIGH ALARM 45

4.2.4 SET THE PUMP SPEED HIGH POINT 46

4.2.5 ENABLE THE AUXILIARY SHAFT LOW ALARM 46

4.2.6 SET THE AUXILIARY SHAFT LOW ALARM POINT 46

4.2.7 ENABLE THE AUXILIARY SHAFT HIGH ALARM 47

4.2.8 SET THE AUXILIARY SHAFT ALARM HIGH POINT 47

4.3 SPEED ALARMS 48

4.3.1 ENABLE THE SPEED LOW ALARM 49

4.3.2 SET THE SPEED LOW ALARM POINT 49

4.3.3 ENABLE THE SPEED HIGH ALARM 49

4.3.4 SET THE SPEED HIGH ALARM POINT 50

4.4 TANK ALARMS 51

4.4.1 ENABLE THE VOLUME LOW ALARM 52

4.4.2 SET THE VOLUME LOW POINT 52

4.5 PRESSURE ALARMS 53

4.5.1 ENABLE THE PRESSURE 1 LOW ALARM 54

4.5.2 SET THE PRESSURE 1 LOW ALARM POINT 54

4.5.3 ENABLE THE PRESSURE 1 HIGH ALARM 54

4.5.4 SET THE PRESSURE 1 HIGH ALARM POINT 55

Table of Contents

Content Page No.

6. OPERATING HISTORY 60

6.1 TOTALS HISTORY 61

6.1.1 RESET THE TOTAL VOLUME 62

6.1.2 RESET THE SUB VOLUME 62

6.1.3 RESET THE TOTAL AREA 62

6.1.4 RESET THE SUB AREA 62

6.1.5 RESET THE TOTAL DISTANCE 63

6.1.6 RESET THE SUB DISTANCE 63

6.1.7 RESET THE TOTAL TIME 63

6.1.8 CHANGE TO A DIFFERENT SUB AREA 63

6.2 SHAFT SPEED HISTORY 64

6.3 MACHINE HISTORY 65

5. CONTROLLER SETUP MENU 56

5.1 SET CONTROL MODE 57

5.2 SET THE MAX ON TIME 57

5.3 SET THE MIN ON TIME 57

5.4 SET THE GAIN SETTING 58

5.5 SET THE PWM SETTING 58

5.6 SET THE FLOW METER SENSITIVITY 58

5.7 SELECT CLOSE VALVE WHEN OFF 59

5.8 TOGGLE THE VALVE REVERSE 59

V 1.0 11/05

7. OPERATIONS: SPRAYER 66

7.1 OPERATION OF THE SPRAYER 67

7.1.1 DISPLAY THE VOLUME REMAINING IN THE TANK 67

7.1.2 DISPLAY THE VOLUME USED 67

7.1.3 FILL THE TANK 67

7.1.4 FILL THE TANK TO A SET VOLUME 67

7.1.5 TO DISPLAY SUB AREA, TOTAL AREA AND SUB AREA NUMBER 67

7.1.6 TURN A SECTION ON 67

7.1.7 TO CLEAR A SUB AREA 68

7.1.8 TO CHANGE THE SUB AREA NUMBER 68

7.1.9 RESET TOTAL AREA 68

7.1.10 SELECT BETWEEN MANUAL AND AUTO SPRAYING 68

7.1.11 SELECT BETWEEN COVERAGE RATE, ROW WIDTH, PRESSURE1,

& FAN SPEED1 69

7.1.12 SELECT BETWEEN FLOW RATE,PUMP SPEED,AUX SHAFT SPEED

& FAN SPEED 69

7.1.13 SELECT BETWEEN VOLUME LEFT AND FLUSH FUNCTION 70

7.1.14 SELECT BETWEEN VOLUME USED, AUX FUNCTION, DUMP OVERRIDE

& DATA 70

7.1.15 SELECT ROW WIDTH 70

7.1.16 ACTIVATE FLUSH FUNCTION 71

7.1.17 ACTIVATE DUMP OVERRIDE FUNCTION 71

7.1.18 ACTIVATE AUXILIARY FUNCTION 72

7.1.19 DISPLAY FAN SPEED MONITORING SCREEN 72

7.2 TO BEGIN SPRAYING 73

7.2.1 TO BEGIN SPRAYING (MANUAL MODE) 73

7.2.2 INCREASE OR DECREASE the APPLICATION RATE (MANUAL MODE) 73

7.2.3 BEGIN SPRAYING (AUTO MODE) 73

7.2.4 CHOOSE A PRESET APPLICATION RATE (AUTO MODE) 73

7.2.5 INCREASE OR DECREASE the APPLICATION RATE (AUTO MODE) 73

7.3 OPERATIONS: DATA LOGGER 74

7.3.1 CONNECT THE DATA LOGGER INTERFACE TO THE EAGLE E15H 75

7.3.2 CONNECT A MODULE TO THE DATA LOGGER INTERFACE 75

7.3.3 REMOVE A MODULE FROM THE DATA LOGGER INTERFACE 75

7.3.4 SPRAY TO A PROGRAMMED RATE 75

7.3.5 CHANGE THE JOB NUMBER 76

7.3.6 SPRAY WITHOUT USING PROGRAMMED RATE 76

Table of Contents

Content Page No.

V 1.0 11/05

8.0. CONFIGURATION OPTIONS 77

8.1 KEY CONFIGURATION 78

8.1.1 ENABLE THE KEY BEEPER ON OR OFF 79

8.1.2 SET THE KEY BEEPER TIME 79

8.1.3 ENABLE THE KEY REPEAT 79

8.1.4 SET THE KEY REPEAT DURATION 79

8.2 ALARM CONFIGURATION 80

8.2.1 ALARM BEEPER OVERVIEW 81

8.2.2 SET THE ALARM CYCLE TIME 82

8.2.3 SET THE ALARM DUTY CYCLE 82

8.2.4 SET THE NUMBER OF ALARM CYCLES 82

8.2.5 ENABLE THE ALARM BEEPER ON/OFF 82

8.3 GENERAL CONFIGURATION 83

8.3.1 COLD RESET 83

8.3.2 FACTORY RESET 83

8.4 SWITCH CONFIGURATION 84

Table of Contents

Content Page No.

9.0. DIAGNOSTICS MODE 85

9.1 LED TEST 86

9.2 SWITCH TEST 87

9.3 KEYS TEST 88

9.4 SENSORS TEST 89

9.4.1 CHECKING LOOM VOLTAGES, FOR 3 PIN SENSORS 90

9.5 RELAYS TEST 91

9.6 REGULATOR VALVE TEST 92

9.7 EEPROM TEST 93

9.8 DISPLAY TEST 93

10. ALARM MESSAGES 94

10.1 ALARM MESSAGES OVERVIEW 94

10.2 ALARM MESSAGES 95

11. SPECIFICATIONS 98

12. WIRING DIAGRAMS

12.1 ECONOMY LOOMS 100

EAGLE CONSOLE PIN OUTS 100

TRACTOR LOOM 101

TRACTOR LOOM 102

SPRAYER LOOM 103

MK5 TO E15h ADAPTOR LOOM 104

V 1.0 11/05

E15h SPRAYER

Features of the E15h EAGLE HORTICULTURAL SPRAYER CONSOLE:

• 4 Preset Widths can be entered.

•4 Row Section switches can control (solenoid, 2 or 3 wire Valves)

• Sprayer can be setup as a:

2 section sprayer

3 section sprayer (2 left and 1 right)

3 section sprayer (2 right and 1 left)

OR 4 section sprayer

• The Sprayer can be setup to switch

1/2 a row per section switch

OR switch a Full row per section switch.

•Auxiliary Function to operate ‘Work Lights’ or ‘Foam Marker’

• Displays PTO SHAFT in rpm, with alarms points. Also display readouts and alarms

which are settable for an Auxiliary Shaft sensor.

• Displays and Monitors up to 12 Fans.

• The KEE Data Logger can be connected to the E15h console to create and

recored all spray jobs.

• Automatic Dump and Flush Functions

• Master ON/OFF switch

• 2 Dedicated Rate buttons (RATE 1/ RATE 2) ; gives the operator finger-tip control

• Rate can be displayed in volume/area (eg. L/Ha) OR volume/distance (eg. L/100m)

• Can control different types of Flow Control (Servo) Valves

• Audio and Visual alarms; low and high alarm points settable for each alarm

• Large Full Visual display

• Displays 8 functions at once; Ground Speed, Rate, Sub-Area, Coverage Rate,

Volume Left, Volume Used, Flow Rate and current alarms ALL on the one screen

• Selectable units (Gallons/Acre, Litres/Hectare etc)

• Machine history data

• Self diagnosis tests

• Back lit keys, with separate contrast knob for full screen control

• 10 Sub Areas keeps records on Hectares sprayed and Volume Used

• Easily Setup and Simple to use

V 1.0 11/05

E15h SPRAYER

The EAGLE E15 Sprayer Console replaces the KEE Technologies Mk3 and Mk5 Spray

Controllers, which have been in the market for the past 25 years. The EAGLE is a

breakthrough replacement for the Mk5, with many more features at no extra cost. It

takes into account the current Mk5 operators, and the transition from the Mk5 to the

EAGLE is minimal, to the point where it is fully compatible with all Mk5 hardware. It is as

simple as swapping the consoles!

The development of the EAGLE has been totally driven by input and suggestions from

farmers and contractors from around the world, making the EAGLE the most advanced

Spray Rate Controller in the world.

The KEE Eagle Horticultural console is a dedicated horticultural sprayer console

developed specifically for the horticultural market.

The Eagle has many new features and easy operation, that has leap-frogged the current

competition which is a considerable bonus to the end user. Including all the features of

its predecessor, the MK5, the EAGLE has four sections, separately indicated section

switches, can display in volume/area or volume/distance, can connect to 2 section, 3

section (3L or 3R) and 4 section sprayers.

The E15h console can monitor 1 to 2 fans. If the optional FAN MONITOR ECU is used

then up to 12 Fans can be monitored and each Fans RPM can be displayed.

The Data Logger (optional) can be connected to the E15h console to set the application

rate for up to 9 jobs and create job sheets for each job; then the Data Logger will record

application rate, which sections where switched ON/OFF, pressure, speed etc to a

Module. The Module can be taken back to the office and create records of jobs done;

graphs can then be created using the Data Logger software.

New features include the all screen display that allows viewing of all the sprayer

functions at a glance, backlight control keys and positive sectional switches.

V 1.0 11/05

Major Topic Heading V 1.2

Personal Notes

Major Topic Heading V 1.2

Personal Notes

Indice

Altri manuali Eagle Mixer musicale

Eagle

Eagle P178 Manuale utente

Manuali Mixer musicale popolari di altre marche

Neve

Neve 8816 Manuale utente

Mackie

Mackie Onyx Analogue Mixer Manuale utente

Behringer

Behringer EUROPOWER PMP518M Manuale utente

Peavey

Peavey S-32 Sanctuary Series Manuale utente

Rane

Rane MP 4 Manuale utente

True

True T9 Touchscreen Console Manuale utente

Studiomaster

Studiomaster Air Pro 24 Manuale utente

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Manuale utente

Roland

Roland M-160 Manuale utente

Yamaha

Yamaha MR1642 Manuale utente

Ecler

Ecler MAC40v Manuale utente

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Manuale utente

Veeder-Root

Veeder-Root TLS-350 Series Manuale utente

Alto

Alto APM80.QUAD Manuale utente

Omnitronic

Omnitronic PM-211 Manuale utente

SoundCraft

SoundCraft B400 Manuale utente

Roland

Roland SoundCanvas SC-8820 Manuale utente

CARVIN

CARVIN RX 1200 Manuale utente