Easy Security 6x dvr Manuale utente
DVR_KIT_A_Version_Manual_V1.0
USER MANUAL
Please read instructions thoroughly before operation and retain it for future reference.
The image shown above may differ from the actual product appearance.
IMPORTANT SAFEGUARD
Graphic Symbol Explanation
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
This exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
All lead-free products offered by the company comply with the requirements of the European law on the
Restriction of Hazardous Substances (RoHS) directive, which means our manufacture processes and
products are strictly “lead-free” and without the hazardous substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European Union the product must be
collected separately at the product end-of-life. This applies to your product and any peripherals marked
with this symbol. Do not dispose of these products as unsorted municipal waste.
CE Mark
This apparatus is manufactured to comply with the radio interference requirements.
Disclaimer
We reserve the right to revise or remove any content in this manual at any time. We do not warrant or assume any legal
liability or responsibility for the accuracy, completeness, or usefulness of this manual. The content of this manual is
subject to change without notice.
MPEG4 Licensing
THIS PRODUCT IS LICENSED UNDER THE MPEG4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL
AND NON-COMMERCIAL USE OF A CONSUMER FOR (i) ENCODING VIDEO IN COMPLIANCE WITH THE MPEG4
VISUAL STANDARD (“MPEG4 VIDEO”) AND/OR (ii) DECODING MPEG4 VIDEO THAT WAS ENCODED BY A
CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG4 VIDEO. NO LICENSE IS GRANTED OR SHALL
BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL
INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE
HTTP://WWW.MPEGLA.COM.
Version
Firmware Version: 1145-1011-1021-1013;
AP Version: 0075.
CAUTION:
To reduce the risk of electric shock, do not expose this apparatus to rain or moisture.
Only operate this apparatus from the type of power source indicated on the label.
The company shall not be liable for any damages arising out of any improper use,
even if we have been advised of the possibility of such damages.
C
CA
AU
UT
TI
IO
ON
N
R
RI
IS
SK
K
O
OF
F
E
EL
LE
EC
CT
TR
RI
IC
C
S
SH
HO
OC
CK
K
TABLE OF CONTENTS
1.1 Package Contents...................................................................................................................................................1
1.2 Kit Features.............................................................................................................................................................1
1.3 Specifications ..........................................................................................................................................................1
1.4 System Diagram and Applications ..........................................................................................................................2
2.1 Camera Installation .................................................................................................................................................4
2.1.1 Wiring............................................................................................................................................................4
2.1.2 Dome Camera ..............................................................................................................................................4
2.1.3 IR Camera ....................................................................................................................................................5
2.2 DVR HDD Installation (Take Model 2 as an example).............................................................................................6
2.3 Camera to DVR Connection....................................................................................................................................7
2.4 DVR Power-Up .......................................................................................................................................................8
3.1 DVR Setup..............................................................................................................................................................9
3.1.1 NTSC / PAL System Switch ..........................................................................................................................9
3.1.2 Date and Time Setting ..................................................................................................................................9
3.1.3 DVR Password Setting .................................................................................................................................9
3.2 Network Setup ......................................................................................................................................................10
3.2.1 Installation & Network Connection ..............................................................................................................10
3.2.2 Network Configuration ................................................................................................................................11
4.1 Menu Configuration...............................................................................................................................................13
4.2 Basic Operation ....................................................................................................................................................14
4.2.1 Front Panel Introduction..............................................................................................................................14
4.2.2 Live Page....................................................................................................................................................16
4.2.3 Recording ...................................................................................................................................................16
4.2.4 Playback .....................................................................................................................................................16
4.2.5 Backup (Model 3 & 4 Only) .........................................................................................................................17
4.2.6 Key Lock and Unlock ..................................................................................................................................18
4.2.7 Upgrade ......................................................................................................................................................18
4.2.8 Search ........................................................................................................................................................19
5.1 Licensed Software AP...........................................................................................................................................20
5.1.1 Installation & Initial Network Connection.....................................................................................................20
5.1.2 AP Control Panel.........................................................................................................................................20
5.1.3 AP Functions...............................................................................................................................................22
5.2 Web Browser ........................................................................................................................................................31
5.3 QuickTime Player..................................................................................................................................................33
6.1 FAQ.......................................................................................................................................................................34
6.2 Default Value.........................................................................................................................................................35
KIT OVERVIEW
1
1. KIT OVERVIEW
1.1 Package Contents
Please check the package contents to make sure that you receive all items shown below. For the accessories supplied
within the Dome and / or IR camera packages, please refer to their own user manuals.
DVR Box Camera Box
Digital Video Recorder (DVR) x 1 Camera x 4 (Dome and / or IR)
Quick Start Guide x 1 20M Video Cable x 4
Free Licensed Software AP Disc x 1 DC-DC Converter x 1
External I/O Port D-Sub PIN Connector x 1
Power Adapter x 1
1.2 Kit Features
‧All-in-one kit design
-- Includes 1 MPEG4 network DVR & 4 high quality cameras
-- Suitable for professional surveillance with necessary devices included and complete functions
‧Advanced MPEG4 compression format
-- Provides clear and high quality images
-- Saves the HDD storage for longer recording hours
‧Advanced MPEG4 network transmission
-- Faster transmission and clearer images via network
‧D.I.Y. operation available
-- Provides clear installation instruction
-- Saves installation cost
‧Quick installation
--The entire installation only takes 30 minutes
‧Applicable for day and night surveillance
-- Professional surveillance system to give you 24-hour protection
-- External alarm & audio-in supported to complete your security
‧Unified power source
-- The included power converter supplies power for both the digital video recorder and four cameras
‧Network surveillance supported
-- Remote surveillance available via your PC with the licensed software AP or IE browser
-- Supports up to 20 on-line viewers simultaneously
KIT OVERVIEW
1
1.3 Specifications
MODEL MODEL 1 MODEL 2 MODEL 3 MODEL 4
Video System NTSC / PAL (switchable)
Video Compression Format MPEG4
Video Input
(Composite video signal 1 Vp-p 75ΩBNC) 4 Channels
Video Loop Out
(Composite video signal 1 Vp-p 75ΩBNC) 4 Channels
Video Output
(Composite video signal 1 Vp-p 75ΩBNC) Main Monitor Output / Call Monitor Output
Maximum Recording Rate Frame: 720×480 pixels with 30 IPS <NTSC> / 720×576 pixels with 25 IPS <PAL>
CIF: 352×240 pixels with 120 IPS <NTSC> / 352×288 pixels with 100 IPS <PAL>
Adjustable Recording Speed Frame: 30, 15, 7, 3 IPS <NTSC> / 25, 12, 6, 3 IPS <PAL>
CIF: 120, 60, 30, 15 IPS <NTSC> / 100, 50, 25, 12 IPS <PAL>
Image Quality Setting Best, High, Normal and Basic
Hard Disk Storage
(Supports over 1000GB HDD capacity, and
HDDs are optional)
Supports HDD＊1 Supports SATA HDD＊1
HDD Quick Cleaning Quick clean up the “index system” of the recorded files. 1000GB under 2 seconds
Recording Mode Manual / Timer / Motion / Alarm / Remote
Refresh Rate 120 IPS for NTSC / 100 IPS for PAL
Audio I/O 1 audio input, 1 audio output (Mono)
VGA Interface NO YES
USB Interface NO Rear Panel x 1
SATA Interface NO YES
Motion Detection Area 16 × 12 grids per camera for all channels
Motion Detection Sensitivity 4 adjustable variables with precise calculation for motion detection
Pre-alarm Recording Yes (8MB)
Backup Device Network Network / USB flash drive
Web Transmitting Compression Format MPEG4
Ethernet 10/100 Base-T. Support remote control and live view via Ethernet.
Web Interface Support licensed software AP, IE browser & Mozilla Firefox browser
Remote Alarm Notification E-mail images, and upload images to FTP site’s specific account
Network Protocol Support TCP/IP, PPPoE, DHCP and DDNS function
PTZ control Supports PELCO-D protocol
IR Remote Control NO YES
Dwell Time (Sequential Channel Switch) Programmable with adjustable dwell time
Alarm I/O 4 inputs, 1 output
Digital Zoom 2X digital zoom (live mode)
Key Lock Yes
Video Loss Detection Yes
Camera Title Support up to 6 letters
Video Adjustable Hue / Color / Contrast / Brightness
Date Display Format YY/MM/DD, DD/MM/YY, MM/DD/YY, and Off
Power Source DC 19V
Power Consumption ＜42 W
Operating Temperature 10℃~ 40℃(50℉~104℉)
Dimensions (mm) 343(W) × 59(H) × 223(D) 345(W) x 68.3(H) x 225(D)
System Recovery System auto recovery after power failure
Optional Peripherals Keyboard Controller
*The specifications are subject to change without notice.
KIT OVERVIEW
2
1.4 System Diagram and Applications
System Diagram
For this all-in-one kit connection, please see the illustration below as an example. The system is an ideal surveillance
system for shop, hospital, office, warehouse, home, manufactory, subway, machine room, parking lot use and so on.
NOTE: The rear panel shown above takes Model 4 as an example. For the actual rear panel of your DVR,
please refer to its own user manual.
KIT OVERVIEW
3
Applications
Shop
Provide evidence for any theft or
dispute
Hospital
Keep an eye on patients’ conditions
Office
Prevent inappropriate behavior or
harassments
Warehouse
Effectively reduce the loss rate of
goods
Home
Guard your family and home at all
times with 24-hour protection
Manufactory
Assist in access control and record the
visitors at the entrance
Subway
Timely monitor the traffic flow, and
provide evidence for any incident or
crime investigation
Machine Room
Monitor unauthorized entry to prevent
the damage
Parking Lot
Avoid a car-jacking or other crime, and
assist in access control
INSTALLATION AND CONNECTION
4
2. INSTALLATION AND CONNECTION
2.1 Camera Installation
Four 20M cables are supplied within your sales package for camera connection. Depending on the actual installation
situation, you may drill a hole on the proper position for the 20M cable to pass through and hide, or arrange it to run along
the surface of the wall.
Tools & Items Needed
1. Power drill or screwdriver x 1
2. 20M cable x 4
3. Necessary screws:
four screws for dome camera
three screws & wall plugs for IR camera
2.1.1 Wiring
Step 1: Choose the proper surveillance location, such as the front door, inside the office, etc.
Step 2: Arrange the 20M cable routing from the DVR site to the place where the camera is installed, such as the ceiling.
Please make sure a certain length of the 20M cable is left for the connection to the camera.
Step 3: Connect to the supplied camera when the camera is mounted. Dome cameras should be ceiling-mounted, and IR
cameras should be ceiling-mounted or wall-mounted. For camera mounting details, please see the description
below: “2.1.2 Dome Camera” at page 4 and/or “2.1.3 IR Camera” at page 5.
2.1.2 Dome Camera
NOTE: Screws for installation are not supplied within the sales package. Please prepare by yourself and use
proper screws.
Step 1: Turn the dome cover counterclockwise to the end and take it off.
INSTALLATION AND CONNECTION
5
Step 2: Mark the positions of four “screw holes” on the ceiling around the hole drilled in advance.
If the installation location doesn’t allow the installation personnel to screw a hole on the ceiling, they may cut the
concave edge on the base of the camera (as shown below) to pass through the power and video line.
Step 3: Mount the camera to the ceiling, and then fix the camera with proper screws.
Connect the video and power connectors to the corresponding connectors of the 20M cable. Then pull the both
cables one by one from the backside of the ceiling to hide them.
Step 4: Adjust the view angle of the lens. Then, put the dome cover back to the camera base and turn clockwise to lock.
2.1.3 IR Camera
Step 1: Attach the bracket to the camera by rotating it clockwise. Then, remove the base of bracket.
Step 2: Mark the positions of three screw holes on the wall around the power and video line hole drilled in advance.
Use the supplied three screws to attach the bracket base to the wall.
Step 3: Attach the camera to the bracket base by securing the joint lock.
There are two screw holes on the backside of the camera. Please choose the proper one which best suits your
installation environment. If the upper screw hole is chosen, it’s recommended to push the Sun Shield a little bit
Power & Video
Line Hole
4 Screw Holes
INSTALLATION AND CONNECTION
6
toward the direction of the lens for easy installation.
Step 4: Connect the BNC jack and the power connector to the 20M cable through the power and video line hole drilled in
advance. Then hide the video cable to the other side of the ceiling.
Step 5: Adjust the camera angle and the Sun Shield position. After that, secure the joint lock to fix.
2.2 DVR HDD Installation (Take Model 2 as an example)
The HDDs must be installed before the DVR is turned on. For detailed installation instructions, please see the following
instructions.
Step 1: Loose the screws on the upper cover and open the upper cover of the DVR.
Step 2: Remove the HDD bracket.
Step 3: Get a compatible SATA HDD, and connect it to the power connector and data bus connector (make sure to align
the HDD precisely for pin connection).
Indice
