EASY3CALL GIP300 Manuale utente
GIP300/300P
User Manual
Version 1.0
2
Revision History
Version Date Description Application scope
V1.0 2006-5-10 The first version issue S304
3
Table of Contents
Product Overview....................................................5
Appearance............................................................................................................................... 5
Keypad..................................................................................................................................... 5
Interfaces introduction ............................................................................................................. 7
Support Protocol ...................................................................................................................... 8
Network Feature....................................................................................................................... 8
Advanced Feature .................................................................................................................... 8
Get Familiar with LCD............................................................................................................ 9
LCD Icon Definitions............................................................................................................... 9
Configuration......................................................10
Keyboard Configuration......................................................................................................... 10
Menu Configuration....................................................................................................... 11
The operation of Menu Configuration ........................................................................... 11
WEB Configuration ...............................................................................................................12
Login the Web................................................................................................................ 12
Browse System Status....................................................................................................13
Network Configuration .................................................................................................. 14
Protocol Settings ............................................................................................................ 22
Equipment Manage........................................................................................................ 27
Advanced Settings:......................................................................................................... 29
User Manage .................................................................................................................. 33
System Log .................................................................................................................... 33
Reboot............................................................................................................................ 33
Use GIP300/GIP300P IP Phone........................................34
View Phone IP and Number................................................................................................... 34
Make Phone Calls .................................................................................................................. 34
Answer an Incoming Call when the Phone is on-hook .......................................................... 36
Answer an Incoming Call when the Phone is making a call.................................................. 36
View and Set Fast Dial Number............................................................................................. 36
View Incoming Call............................................................................................................... 36
View Outgoing Call ...............................................................................................................37
Volume Settings ..................................................................................................................... 37
Mute when making a call....................................................................................................... 37
Call Hold................................................................................................................................ 37
Call Waiting and Call Flashing .............................................................................................. 37
Call Transfer........................................................................................................................... 38
Three Way Conference........................................................................................................... 38
Appendix...........................................................39
The process of Dial Rule matching........................................................................................ 39
GIP300/GIP300P IP Phone Default Settings.......................................................................... 39
4
Common ProblemAnalysis.................................................................................................... 40
Use safety way to resume software when GIP300/GIP300P IP Phone is failed to boot........ 40
5
Product Overview
Appearance
The following photo illustrates the appearance of a GIP300/GIP300P IP phone.
Keypad
GIP300/GIP300P IP Phone has a 30-button keypad.
Buttons Definitions and Functions
0~9 Digits input
* “*” is used as “.” when making a Direct IP call.
“**” is used as “@”.
# 1. End dialing when you dial the number
2. Confirm and save when setting the fast dial.
UP/VOL+
1. Increase Ring Volume in the IDLE Mode.
2. Increase Handset/Speakerphone Volume in the
conversation.
3. Previous Menu Item in the keypad configure mode.
6
DOWN/VOL- 1. Reduce Ring Volume in the IDLE Mode.
2. Reduce Handset/Speakerphone Volume in the
conversation.
3. Next Menu Item in the keypad configure mode.
MENU/SET
(M8) 1. Enter Menu Mode when the phone is in IDLE Mode.
2. Enter submenu.
3. Confirm and save once entering Menu.
4. As the eighth fast dial button when M8 work with Fn.
HOLD Hold the active call, you will hear the dialing tone, at the
same time you can invite a new call.
TRANSFER Transfer the active call to another party.
CONFERENCE Enter 3-way conferencing call.
FLASH 1. Switch between Line1 and Line2
2. Receive another call.
RD/BACK 1. Send the number and begin to make a call when end
dialing.
2. As Re-dial button when the phone is off-hook.
HF As switching button between Hands-free and Hook Mode.
The indicator light beside the button is always red when you
use the Hands-free Mode.
SYS/MUTE/DEL
（M5）1. Browse the System Status like IP address, Gateway IP,
Phone number in the IDLE Mode.
2. Delete button in the Keypad Configure Mode.
3. Mute button when making a call.
4. As the fifth fast dial button when M5 work with Fn.
MESSAGE/REC 1．Enter Voice Mail sub-Menu when you off hook.(You need
to enable the MWI in the web.)
2．Record when making a call and end recording when
pressing the button again.
7
IN
(M6) 1. Browse the last 10 Incoming Call when the phone is
on-hook.
2. Browse the last 10 Incoming Call Records when the phone
is Off-hook and make the current call when pressing the
“RD/BACK” button.
3. As the sixth fast dial button when M6 work with Fn.
OUT
(M7) 1. Browse the last 10 Outgoing Call when the phone is
on-hook.
2. Browse the last 10 Outgoing Call Records when the phone
is Off-hook and and make the current call when pressing
the “RD/BACK” button.
3. As the seventh fast dial button when M7 work with Fn.
Fn Fast dial precursor button, you should see the fast dial
definition.
LINE1/M1
1. Switch to the first line when dialing the number.
2. As the first fast dial button when M1 work with Fn.
LINE2/M2
1. Switch to the second line when dialing the number.
2. As the second fast dial button when M2 work with Fn.
LINE3/M3 As the third fast dial button when M3 work with Fn.
LINE4/M4 As the fourth fast dial button when M4 work with Fn.
Interfaces introduction
LAN: Link PC or build local area network
WAN: Link Internet or Router
HEADSET: Link the MIC instead of Hook
POWER: +5 Volts DC, 1.2A
8
Support Protocol
Support SIPv2.0 (RFC3261)
Support Outband Proxy
Support Voice Codecs: G711A，G711U，G729A/B，G723.1(5.3k/6.3-k)
Support Echo Cancellation G.168
Support Jitter Buffer，VAD，CNG
Support RTP and RTCP voice communication
Support DTMF – In-Band/Out-of-Band (rfc2833,SIP Info)
Support Tone Standards for different nations and areas.
Support NAT Traversal: STUN,
Support SIP domain, SIP authentication, parse domain and domain register
Support Direct IP to IP calling
Support register two SIP Servers at the same time or two phone numbers for one SIP
Server.
Network Feature
Support the choice of WAN/LAN Bridge and NAT Mode
Support NAT and NAPT
Support DMZ
Support PPPOE for xDSL and re-dial automatically when the phone break off
Support DCHP Client (WAN port)
Support DCHP Server (LAN port)
Support checking Network Status automatically and displayed on the LCD
Support Layer-2 Qos (802.1P，802.1Q)
Support Layer-3 Qos
Support MAC Clone for WAN
Support NTP for getting Network Time
Advanced Feature
Support register two SIP Servers at the same time or two phone numbers for one SIP
Server.
Support SIP Enhanced Telephone Services: Call Waiting / Call Hold / Call Transfer /
Call Forward/ Three Way Conference
MWI for Voice Message with a button
10 incoming/outgoing numbers check
8 fast-dial buttons
Mute when making a call
GIP300/300P has 9 kinds of ringing, and you can down load the ringing you like in
the Web.
9
Support dialing prefix
Support dialing rule settings and you can down load the dialing rule you like in the
Web.
Support Private VPN, encryption and NAT traversal
Support SIP and RTP encryption
Support GMANAGER for centralizing management
Support Local Syslog
Get Familiar with LCD
Here is the display when all segments illuminate：
LCD Icon Definitions
LCD Icons definition below:
Icon Definitions
The Icon display Register and Network
Status.
1-7 scales to show Network Status based on
actual status. ON if SIP server is located,
otherwise display none.
ON when the Line 1 is used.
ON when the Line 2 is used.
Show Handset and Speakerphone Volume
when the phone is Off-hook.
Show Ring Volume when the phone is
On-hook..
1-7 scales to adjust volume.
Mic Mute Icon:
ON if mute an active call while in
conversation.
10
Missed Call Icon:
ON if Phone has missed call and not be read
when the phone is On-hook or browse the
incoming call records.
Call Transfer Icon:
ON if enable Call Transfer Unconditionally
or Transfer when busy.
IN and OUT Icon:
ON “IN” or “OUT” when browse the
incoming or outgoing call records.
Three uses for this Icon:
1．Show current time with when the
phone is On-hook.
2．Show Call Logs with when browse
the call records.
3．Show Menu Items when enter Menu
Mode.
AM. or PM. Icon:
Indicate that either Signal or RTP was
encrypted, or both
Message Status Icon:
ON if phone has new message.
LAN Icon:
ON if LAN has linked.
WAN Icon:
ON if WAN has linked.
Day indication
Indicate that Phone has connected to Central
Manager Software
Indicate the current WAN port IP mode
Configuration
Keyboard Configuration
You can browse and modify the phone’s IP address, select ringing, software
information, default settings and reboot.
Questo manuale è adatto per i seguenti modelli
1
Indice
