EasyGate TERRIER Series Manuale utente

TERRIER SERIES
SWING GATE OPENER
USER MANUAL

INDEX
1.1 GENERAL SAFETY PRECAUTION
1.2 INSTALLATION
A. STANDARD INSTALLATION
B. DIMENSIONS OF MOTOR:
C. INSTALLSTION DATA SHEET
D. MOTOR FIXING
E. WIRE CONNECTION:
F. EMERGENCY RELEASE
1.3 TECHNICAL FEATURES
1.4 MAINTENANCE
1
2
2
2
3
4
4
5
6
6

TERRIER SERIES SWING GATE OPENER USER MANUAL
1.1 GENERAL PRECAUTION:
1
WARNING :
This user manual is only for qualified technicians who is specialized in installations and automations.
(1) All installations, electrical connections, adjustments and testing must be performed only after
reading and understanding of all instructions carefully.
(2) Before carrying out any installation or maintenance operation, disconnect the electrical power
supply by turning off the magneto thermic switch connected upstream and apply the hazard area
notice required by applicable regulations
(3) Make sure the existing structure is up to standard in terms of strength and stability
(4) When necessary, connect the motorized gate to reliable earth system during electricity connection phase.
(5) Installation requires qualified personnel with mechanical and electrical skills.
(6) Keep the automatic controls (remote, push bottom, key selectors…etc) being placed properly
and away from children.
(7) For replace or repair of the motorized system, only original parts must be applied. Any damage
caused by inadequate parts and methods will not be claimed to motor manufacturer.
(8) Never operate the drive if you have any suspect with what it might be faulty or damage to the system.
(9) The motors are exclusively designed for the gate opening and closing application, any other
usage is deemed inappropriate. The manufacture should not be liable for any damage resulting
from the improper use. Improper usage should void all warranty, and the user accepts sole
responsibility for any risks thereby may accrue.
(10) The system may only be operated in proper working order. Always follow the standard procedures
by following the instructions in this installation and operating manual.
(11) Only command the remote when you have a full view of the gate.
TMT AUTOMATION INC. shall not be liable for any injury, damage, or any claim to any person
or property which may result from improper use or installation of this system.
Please keep this installation manual for future reference.

ASTANDARD INSTALLATION
TERRIER SERIES SWING GATE OPENER USER MANUAL
2
1.2 STANDARD INSTALLATION
1. 24V DC Flashing Light
2. Push Button
3. Control Box
4. Photo Sensor
5. 24V DC gate opener
6. Transmitter
2x1.5 mm2
2x1.5 mm2
4x0.5 mm2
TX - 4x0.5 mm2
RX - 4x0.5 mm2
3x1.5 mm2
2x1.5 mm2
2x1.5 mm2
6
23
1
DIMENSIONS OF MOTOR:
TERRIER150
TERRIER200
B
5
5
4 4

CINSTALLSTION DATA SHEET
TERRIER SERIES SWING GATE OPENER USER MANUAL 3
Comply with the measures shown on the chart for proper installation. Adjust the gate structure
to fit it for best automation, if necessary.
Before preceding the installation, be sure that gate moves freely and that:
1) Hinges are properly positioned and greased.
2) No obstacles in the moving area.
3) No frictions between two gate leafs or with the ground while moving
4). “C” value is 88mm.
5). “D” can be measured from the gate easily.
6). “A” = “C” + “D”
7). The value of “B” can be calculated from the value of “A” and the leaves opening angle.
Ex. If “A”=160mm with the leaves opening angle of 100 degrees, then the value of “B” is
approximate 200mm.
**Please make sure “B” and “A” are similar or the same in value that the leaves can be operated
smoothly, also to reduce the burden of the motor.
TERRIER150 TERRIER200

DMOTOR FIXING
Assemble the rear bracket and fix it on the pillar.
EWIRE CONNECTION:
TERRIER SERIES SWING GATE OPENER USER MANUAL
4
Release the gate opener and place the pin into the fitting position no.1 and no. 2
Make sure the gate openers are mounted in horizontal position especially in those positions.
1) Gate in “CLOSE” position
2) Gate in “OPEN” position
3) Gate at “45。angle” position
Prior to weld the bracket on the gate leaf(if necessary), cover the gate opener to prevent
damages from sparks.
(1) Avoid tension in the cable during open and close phase.
(2) Always connect the grounding wire(GND)
no.1
A
B
no.2
White(+)
Yellow(-)
Yellow(-)
White(+)
Motor
Motor

FEMERGENCY RELEASE
TERRIER SERIES SWING GATE OPENER USER MANUAL 5
Gear Motor Release (for left motor)
1). Insert the release key to the release slot
2). Turn the release key anti-clockwise
3). Pull out the release bar
4). Turn the release key clockwise to fix the release bar, the release bar has to be in pulled
out position when you turn the release key clockwise
5). The turning direction will be reversed for right motor.
1. 2.
3. 4.

TERRIER SERIES SWING GATE OPENER USER MANUAL
6
1.3 TECHNICAL FEATURES :
TERRIER150 TERRIER200
Low Voltage
24V
24V power supply
for great safety
Durability
Solid material apply
with lasting usage
EZ Instal
Easy installation
and user friendly
interface
Silence
Worm gear application
give silence operation
Manual release device
with easy use and
highly protection
Key Release
1.4 MAINTENANCE:
Conduct the following operations at least every 6 months. If in high intensity of use,
shorten the period in between.
Disconnect the power supply:
(1) Clean and lubricate the screws, the pins, and the hinge with grease.
(2) Check the fastening points are properly tightened.
(3) Make the wire connection are in good condition.
Connect the power supply:
(1) Check the power adjustments.
(2) Check the function of the manual release.
(3) Check the function of photocells or other safety devise.
Motor
Gear type
Thrust
Stroke length
Power supply
Maximum operating
Maximum gate weight
Maximum gate length
Duty cycle
Operating Temperature
Dimension
Weight
24Vdc motor with mechanical release
Worm gear
1500N
360mm
24Vdc
4.2A for maximum 10 seconds.
150 kg per leaf
2 meters
20%
-20oC~+50oC
694mm * 100mm * 197mm
3.1kg
24Vdc motor with mechanical release
Worm gear
2000N
400mm
24Vdc
4.2A for maximum 10 seconds.
200 kg per leaf
2.5 meters
20%
-20oC~+50oC
819mm * 100mm * 197mm
3.6kg
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali EasyGate Apricancello




















