easynet EC-2M-B3N-ONV Manuale utente
1
Disclaimer
•While every effort has been made to ensure that the information contained in this guide is
accurate and complete, no liability can be accepted for any errors or omissions
•NUVICO reserves the right to change the specifications of the hardware and software
described herein at any time without prior notice.
•No part of this guide may be reproduced, transmitted, transcribed, stored in a retrieval
system, or translated into any language in any form, by any means, without prior written
permission of NUVICO.
•NUVICO makes no warranties for damages resulting from corrupted or lost data due to a
mistaken operation or malfunction of the cameras, peripheral devices, or unapproved/
unsupported devices.
Warning and Caution
WARNING!
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS
THROUGH THE VENTILATION GRILLS OR OPENINGS ON THE EQUIPMENT.
CAUTION!
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
2
FCC Compliance Statement
CE Compliance Statement
FCC INFORMATION:
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO
COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO
PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE
REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN
THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS
EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY
ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE
INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL
AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE THE
USER WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT HIS OWN
EXPENSE.
CAUTION: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY
THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S
AUTHORITY TO OPERATE THE EQUIPMENT.
THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE A EST CONFORME À LA NORME
NMB-003 DU CANADA.
WARNING
THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS
PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH CASE THE USER
MAY BE REQUIRED TO TAKE ADEQUATE MEASURES.
3
Important Safeguards
•Read these instructions.
•Heed all warnings.
•Follow all instructions.
•Do not use this equipment near water.
•Clean only with dry cloth.
•Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
•Do not install near any heat sources such as radiators, heat registers, stoves, or other
equipment (including amplifiers) that produce heat.
•Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two blades
and a third grounding prong. The wide blade or the third prong is provided for your safety.
If the provided plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
•Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the equipment.
•Only use attachments/accessories specified by the manufacturer.
•Unplug this equipment during lightning storms or when unused for long periods of time.
•Refer all servicing to qualified service personnel. Servicing is required when the
equipment has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the equipment, the
equipment has been exposed to rain or moisture, does not operate normally, or has been
dropped.
•CAUTION - THIS MANUAL IS FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY.
TO RE- DUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY
SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS
UNLESS YOU ARE QUALIFIED TO DO SO.
•Use Certified/Listed Class 2 power supply transformer only.
4
Table of Contents
1. Introduction........................................................................ 5
About This Manual .........................................................................................5
1.1 Key features.............................................................................................5
1.2 Content Verification..................................................................................6
1.3 EC-2M-B3N-ONV HD Camera Dimensions..............................................7
2. Installation and Configuration............................................ 8
2.1 Installation................................................................................................8
2.2 Connection Cable.....................................................................................9
2.3 Using Service Monitor Port and Wire Controller .....................................10
2.4 Resetting to the Factory Default Settings ...............................................11
3. Program and Operation................................................... 12
3.1 Detecting IP Cameras with IP Cam Finder .............................................12
3.2 Access from a Web Browser ..................................................................13
3.3 Access from the Internet.........................................................................14
3.4 Setting the Admin Password Over a Secure Connection........................14
3.5 Live View Page.......................................................................................15
3.6 Network Camera Setup..........................................................................17
5
1. Introduction
About This Manual
Thank you for purchasing our EasyNet EC-2M-B3N-ONV HD Camera.
This full-featured camera comes equipped with a progressive scan imager, which transmits
at high definition 1920 x 1080 resolution as well as enhances low light sensitivity and
provides crystal clear pictures even in challenging lighting environments.
1.1 Key features
•Brilliant video image utilizing H.264 video compression.
•Triple network streams simultaneously in Full HD (1920x1080), CIF (320x240) and
MJPEG (320x240) for increased flexibility depending on the various environments.
•Power over Ethernet, utilizing 802.3af standards so that video and power can be used
over single cable. No extra power outlet or power source is needed.
•For increased flexibility, the camera also comes equipped with 24 VAC to be used with
standard power supply or transformer when Power over Ethernet is not being used.
6
1. Introduction
1.2 Content Verification
Before installing the camera, please make sure that all of the following items are included in
the box.
1. EC-2M-B3N-ONV HD Camera
2. Installation Guide
3. Mounting Template Sheet
4. Service Monitor Cable and Controller
5. Accessories Kit
7
1. Introduction
1.3 EC-2M-B3N-ONV HD Camera Dimensions
8
2. Installation and Configuration
2.1 Installation
Secure the HD camera to the wall or ceiling using the supplied camera mounting bracket.
2. Installation and Configuration
Secure the HD camera to the wall or ceiling using the supplied camera mounting bracket.
Secure the HD camera to the wall or ceiling using the supplied camera mounting bracket.
9
2. Installation and Configuration
2.2 Connection Cable
NO Wire Color Description
1 Black Service Monitor Port
2 Black Ethernet, RJ-45 port compatible with 10/100Mbps having PoE
functionality. Modular Jack
3 Red: DC12V
White: GND Main Power, 2pin terminal, DC12V 500mA(6.0W)
4
Pink: Alarm In
Yellow: GND
Light Blue:
Alarm Out
Gray: GND
Alarm Input, Alarm Output: 4pin terminal.
**Disabled**
10
2. Installation and Configuration
2.3 Using Service Monitor Port and Wire Controller
Service monitor output port, similar to headphone jack is located along with series of input
connectors where PoE and Power Input is. It is used for two purposes.
1. Using handheld service monitor, you can determine where the camera is
pointing towards.
2. Change Camera ID, and IPAddress.
On rare instances, if you must, you can change the
Name or Title and IP address of the camera.
Using the
buttons on the controller, you
can change the parameters.
Please consult with NUVICO Technical Support
first before doing so since this can interrupt the
communication to the recorder.
Indice
