EasyPro SC18 Manuale utente
Ground Mount Cabinet Assembly
Thank you for your purchase of the EasyPro SC18 ground cabinet. Ideal for housing aeration com-
pressors, this steel cabinet is designed to mount to an 18" x 11
3
/8" base. The cabinet must sit on the
base 2" above grade to ensure adequate ventilation. Keep grass, shrubbery or other obstructions
from blocking the air vents on the cabinet.
Mounting SC18 cabinet to base:
4. Orient the cabinet with the base so that
the tubing outlet holes align with the notch
in the base.
3. Place the spacer blocks over top of
each bolt.
2. Install the four bolts and washers from the
bottom of the base.
1. Determine location to install cabinet. En-
sure that ground is at, level and clear of
possible obstructions.
Manufactured by EasyPro Pond Products, Grant, MI • www.easypro.com
5337 • 6/18
5. Carefully mount the
cabinet on the four bolts.
A second person may be
needed to support the
cabinet during this step.
Cabinet is now installed.
Follow aeration kit instructions
to properly install compressor,
tubing and diusers.
6. Install the top washers and locknuts inside the cabinet.
Tighten with a Phillips screwdriver and a
7
/
16
" wrench
or socket.
Indice
Altri manuali EasyPro Allegato
