Eaton Powerware 9125 Manuale utente

9125

INSTALLATION INSTRUCTIONS

Seismic Kit

For use with Two-in-One

2500–3000 VA Models

www.powerware.com

Powerware is a registered trademark of Powerware Corporation.

may be reproduced in any way without the express written approval of Powerware Corporation.

Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

Powerware 9125 (2500–3000 VA) Seismic Kit

The PowerwareR9125 (2500–3000 VA) seismic kit is available in two

models: a four-unit model and a six-unit model. The four-unit model can

secure up to four UPS, battery, or PowerPassRDistribution Module (PDM)

cabinets; the six-unit model holds up to six cabinets. Both models include

spacers for any extra openings.

Four-Unit Model

(Shown with Spacer)

Six-Unit Model

(Shown with Spacer)

Figure 1. Seismic Kits

The seismic kit includes:

쑺1 seismic base with casters

쑺1 front strap

쑺1 back strap with tabs

쑺4 seismic base angles

쑺4spacers

쑺8M6´16 hex bolts

쑺8M6lockwashers

쑺24 M4 ´8 Phillips hex-head screws with lockwashers

쑺6M4´10 Phillips hex-head screws with lockwashers

Powerware 9125 (2500–3000 VA) Seismic Kit

4Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

The following steps explain how to install the seismic kit.

1. If you are bolting the cabinet to the floor, use the following drill

patterns to prepare the floor mounting holes.

60.85 cm

(23.96 in)

53.96 cm

(21.24 in)

48.00 cm

(18.90 in)

43.00 cm

(16.93 in)

Ø1.43 cm

(0.56 in)

Figure 2. Drill Pattern for the Four-Unit Model

Powerware 9125 (2500–3000 VA) Seismic Kit

Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

60.85 cm

(23.96 in)

53.96 cm

(21.24 in)

60.40 cm

(23.78 in)

65.41 cm

(25.75 in)

Ø1.43 cm

(0.56 in)

Figure 3. Drill Pattern for the Six-Unit Model

Powerware 9125 (2500–3000 VA) Seismic Kit

6Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

2. Attach the front and back straps to the base using the supplied

M6 ´16 hex bolts and lockwashers (see Figure 4). Verify the

straps align with the front and back edges of the base.

NOTE For floor mounting, also attach the seismic base angles with the

front and back straps as shown in Figure 5.

NOTE The base casters are removeable. To mount the seismic kit flush

with the floor, remove the casters and secure the base angles using the

inside screw position.

Figure 4. Attaching the Straps

Figure 5. Seismic Base Angles for Floor Mounting

Powerware 9125 (2500–3000 VA) Seismic Kit

Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

3. On the back of each cabinet, remove the screw on the top left

corner and discard (see Figure 6).

Figure 6. Removing Cabinet Screws

4. Beginning with a middle position, slide each cabinet into place.

NOTE The PDM must be installed to the left of the UPS and the EBM(s)

must be installed to the right of the UPS.

Figure 7. Sliding in a Cabinet

Powerware 9125 (2500–3000 VA) Seismic Kit

8Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

5. Attach the cabinet to the tab on the back strap by installing one

of the supplied M4 ´10 Phillips hex-head screws (see Figure 8).

Figure 8. Securing the Cabinet to the Back Strap

6. Fasten the top of the cabinet to the front strap with two of the

supplied M4 ´8 Phillips hex-head screws.

Figure 9. Securing the Front Strap

Powerware 9125 (2500–3000 VA) Seismic Kit

Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

7. Install the remaining cabinets, leaving any empty slots to the

outside position(s).

If there is an empty slot, install spacers to complete the seismic

kit. Attach the spacer to the front and back straps using the

supplied M4 ´8 Phillips hex-head screws.

Figure 10. Installing Spacers

8. Roll the loaded cabinet to its permanent location.

If you installed seismic base angles, secure the base to the floor

with earthquake bolts (not provided).

Figure 11. Floor Mounting

Powerware 9125 (2500–3000 VA) Seismic Kit

10 Powerware®9125 (2500–3000 VA) Seismic Kit Installation Instructions SRev A www.powerware.com

Altri manuali per Powerware 9125

Altri manuali Eaton UPS

Eaton

Eaton Powerware 9910 UPS Manuale utente

Eaton

Eaton Powerware 5115 Manuale utente

Eaton

Eaton DXRT 10KS31-IN Series Manuale utente

Eaton

Eaton Ellipse ASR 450 Manuale utente

Eaton

Eaton 93PM-L IAC-B Manuale utente

Eaton

Eaton 9E Manuale utente

Eaton

Eaton Powerware 9155 Manuale utente

Eaton

Eaton 5S 700VA Manuale utente

Eaton

Eaton Power Xpert Gateway Minislot Manuale di programmazione

Eaton

Eaton Powerware 9355 Manuale utente

Eaton

Eaton 3SMini Istruzioni per il montaggio

Eaton

Eaton Powerware 5110 Manuale utente

Eaton

Eaton 9155 UPS Manuale utente

Eaton

Eaton 93E Manuale utente

Eaton

Eaton PowerXpert 9395P-600/600 Manuale utente

Eaton

Eaton Ellipse PRO 650 Manuale utente

Eaton

Eaton Powerware 3105 UPS Manuale utente

Eaton

Eaton Powerware 9355 Manuale utente

Eaton

Eaton 550 Manuale utente

Eaton

Eaton 93PR Series Manuale

Eaton

Eaton 9PX Istruzioni per il montaggio

Eaton

Eaton 9EEBM240 Manuale utente

Eaton

Eaton 9PX EBM 240V Manuale utente

Eaton

Eaton 5S 850 Manuale utente

Manuali UPS popolari di altre marche

Pylontech

Pylontech Victron & Pylontech US5000 Manuale utente

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuale utente

Mecer

Mecer ME-1000-WTU Manuale utente

Mustek

Mustek PowerMust 530(B) Plus Manuale di installazione e funzionamento

Emerson

Emerson Liebert NXL series Manuale utente

MAKELSAN

MAKELSAN BOXER SERIES Manuale utente

Block

Block PC-0524-400-0 Manuale utente

CyberPower

CyberPower CP585LCD Manuale utente

CyberPower

CyberPower Office Tower Series UPS 1000 Manuale utente

CyberPower

CyberPower BM100 Manuale utente

Best Power

Best Power 610 Manuale utente

Best Power

Best Power Unity/I UT3K Manuale utente

Mustek

Mustek PowerMust 400 Offline Manuale utente

Xantrex

Xantrex Trace 512 UR-UPS Manuale utente

Forza

Forza SL-1501UL Manuale utente

LEGRAND

LEGRAND keor 310081 Manuale utente

ABB

ABB Conceptpower DPA 500 Manuale utente

ZincFive

ZincFive BC Series Manuale utente