Eaton Powerware 9390 IAC-D Manuale utente

Powerware 9390 Integrated Accessory Cabinet

IAC-D Configuration

Installation and Operation Manual

For use with 40–80 kVA and 100–160 kVA UPS Models

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

This manual contains important instructions that you should follow during installation and

maintenance of the UPS and batteries. Please read all instructions before operating the

equipment and save this manual for future reference.

Consignes de sécurité

CONSIGNES DE SÉCURITÉ IMPORTANTES

CONSERVER CES INSTRUCTIONS

CE MANUEL CONTIENT DES CONSIGNES DE SÉCURITÉ IMPORTANTES

Powerware is a registered trademark of Eaton Electrical Inc.

document may be reproduced in any way without the express written approval of Eaton Corporation.

EATON Powerware®9390 IAC-D Installation and Operation Manual S164201591 Rev B powerware.com

Table of Contents

1Introduction 1-1............................................................

1.1 Configurations 1-1............................................................

1.2 Using This Manual 1-3.........................................................

1.3 Conventions Used in This Manual 1-4............................................

1.4 Safety Warnings 1-5...........................................................

1.5 For More Information 1-6......................................................

1.6 Getting Help 1-6..............................................................

Section I – Installation

2 IAC-D Installation Plan and Unpacking 2-1....................................

2.1 Creating an Installation Plan 2-1.................................................

2.2 Preparing the Site 2-1.........................................................

2.2.1 Environmental Considerations 2-2...........................................

2.2.2 Preparing for Wiring the IAC-D 2-2...........................................

2.3 Inspecting and Unpacking the IAC-D 2-2.........................................

3 Installing the IAC-D 3-1.....................................................

3.1 Preliminary Installation Information 3-1..........................................

3.2 Unloading the Powerware 9390 IAC-D from the Pallet 3-1...........................

3.3 IAC-D Cabinet Installation 3-5..................................................

3.3.1 Line-up–and–Match IAC-D Installation 3-5.....................................

3.3.2 Standalone IAC-D Installation 3-10............................................

3.3.3 Installing IAC-D Power Wiring 3-12............................................

3.4 Initial Startup 3-14.............................................................

3.5 Completing the Installation Checklist 3-14.........................................

Section II – Operation

4 Understanding IAC-D Operation 4-1..........................................

4.1 Distribution Panelboard Configuration 4-1........................................

4.2 Distribution Breaker Configuration 4-1...........................................

4.3 Distribution Panelboard and Distribution Breaker Configuration 4-1..................

Table of Contents

ii EATON Powerware®9390 IAC-D Installation and Operation Manual S164201591 Rev B powerware.com

5 IAC-D Features, Options, Controls, and Operation 5-1.........................

5.1 IAC-D Standard Features 5-1...................................................

5.1.1 Installation Features 5-1....................................................

5.1.2 Expansion 5-1.............................................................

5.2 Options 5-1..................................................................

5.2.1 Distribution Panel 5-1......................................................

5.2.2 Distribution Breakers 5-1...................................................

5.3 Symbols 5-2.................................................................

5.4 IAC-D Controls 5-2............................................................

5.5 IAC-D Operation 5-5..........................................................

6 Maintaining the IAC-D 6-1...................................................

6.1 Important Safety Instructions 6-1................................................

6.2 Performing Preventive Maintenance 6-1..........................................

6.2.1 DAILY Maintenance 6-1....................................................

6.2.2 PERIODIC Maintenance 6-2.................................................

6.2.3 ANNUAL Maintenance 6-2..................................................

6.3 Short Circuits 6-2.............................................................

6.4 Maintenance Training 6-2......................................................

7 Product Specifications 7-1...................................................

7.1 Model Number 7-1...........................................................

7.2 IAC-D Input 7-1..............................................................

7.3 IAC-D Output 7-1.............................................................

7.4 Environmental Specifications 7-1................................................

Appendix A – Installation Information A-1.........................................

Warranty W-1...................................................................

iii

EATON Powerware®9390 IAC-D Installation and Operation Manual S164201591 Rev B powerware.com

List of Figures

Figure 1-1. Powerware 9390 IAC-D Cabinet 1-2..............................................

Figure 2-1. Powerware 9390 IAC-D as Shipped on Pallet 2-3....................................

Figure 3-1. Removing Front Shipping Bracket on the Powerware 9390 IAC-D 3-3..................

Figure 3-2. Removing Rear Shipping Bracket on the Powerware 9390 IAC-D 3-4...................

Figure 3-3. 80 kVA UPS with Line-up–and–Match IAC-D 3-5....................................

Figure 3-4. 160 kVA UPS with Line-up–and–Match IAC-D 3-6...................................

Figure 3-5. 80 kVA UPS to IAC-D Joining Brackets 3-8.........................................

Figure 3-6. 160 kVA UPS to IAC-D Joining Brackets 3-9........................................

Figure 3-7. 80 kVA UPS with Standalone IAC-D 3-10...........................................

Figure 3-8. 160 kVA UPS with Standalone IAC-D 3-11..........................................

Figure 4-1. Path of Current Through the IAC-D with Distribution Panelboards 4-2.................

Figure 4-2. Path of Current Through the IAC-D with Distribution Breakers 4-3....................

Figure 4-3. Path of Current Through the IAC-D with Distribution Panelboard and Breakers 4-4......

Figure 5-1. Powerware 9390 IAC-D Controls – with Distribution Panel Option 5-3.................

Figure 5-2. Powerware 9390 IAC-D Controls – with Distribution Breaker Option 5-4...............

iv EATON Powerware®9390 IAC-D Installation and Operation Manual S164201591 Rev B powerware.com

This page intentionally left blank.

1-1

EATON Powerware®9390 IAC-D Installation and Operation Manual S164201591 Rev B powerware.com

Chapter 1 Introduction

The Powerware®9390 Integrated Accessory Cabinet-Distribution (IAC-D) is designed for use

with the Powerware 9390 three-phase Uninterruptible Power Systems. The IAC-D provides

power distribution options for servers, racks, and other equipment via distribution

panelboards, or distributes power to larger loads via distribution circuit breakers. The

distribution options are custom configurable, enabling adaptation and expansion without

costly electrical rework.

The IAC-D is housed in a single, free-standing cabinet, with safety shields behind the doors

for hazardous voltage protection. The cabinet matches the UPS cabinet in style and color,

and can be installed in line-up–and–match or standalone configurations. Figure 1-1 shows

the Powerware 9390 IAC-D.

1.1 Configurations

The following IAC-D configurations are possible:

쑺One or two 225A distribution panels (208V only)

쑺One to six 40-100A adjustable distribution breakers (208V or 480V)

쑺One to six 100-250A adjustable distribution breakers (208V or 480V)

쑺One 225A distribution panel and one to three 100-250A adjustable

distribution breakers (208V only)

쑺One 225A distribution panel and one to three 40-100A adjustable

distribution breakers (208V only)

Introduction

1-2 EATON Powerware®9390 IAC-D Installation and Operation Manual S164201591 Rev B powerware.com

Figure 1-1. Powerware 9390 IAC-D Cabinet

Introduction

1-3

EATON Powerware®9390 IAC-D Installation and Operation Manual S164201591 Rev B powerware.com

1.2 Using This Manual

This manual describes how to install and operate the Powerware 9390 IAC-D. Read and

understand the procedures described in this manual to ensure trouble-free installation and

operation.

The information in this manual is divided into the sections and chapters listed. At a

minimum, Chapters 1 through 3 and Chapter 5 should be examined.

쑺Chapter 1, “Introduction” – provides a brief description of the IAC-D, a description of

the content of each chapter, text conventions used in the manual, safety warnings, and

reference information.

Section I, Installation

쑺Chapter 2, “IAC-D Installation Plan and Unpacking” – explains how to prepare the site

for the installation of the IAC-D. It discusses equipment environmental requirements,

inspecting, and unpacking cabinets.

쑺Chapter 3, “Installing the IAC-D” – describes how to install and wire the IAC-D.

Section II, Operation

쑺Chapter 4, “Understanding IAC-D Operation” – provides information on how an IAC-D

works.

쑺Chapter 5, “IAC-D Features, Controls, and Operation” – describes the standard and

optional IAC-D features, the IAC-D controls, and how to use the IAC-D.

쑺Chapter 6, “Maintaining the IAC-D” – contains maintenance instructions for the IAC-D.

쑺Chapter 7, “Product Specifications” – provides specifications for the IAC-D.

쑺Appendix A, “Installation Information” – contains important information on wiring

requirements and recommendations, and important diagrams of the cabinets’

mechanical details and electrical access.

쑺Warranty – provides the Powerware warranty for this product.

Read through each procedure before beginning the procedure. Perform only those

procedures that apply to the IAC-D being installed or operated.

Introduction

1-4 EATON Powerware®9390 IAC-D Installation and Operation Manual S164201591 Rev B powerware.com

1.3 Conventions Used in This Manual

This manual uses these type conventions:

쑺Bold type highlights important concepts in discussions, key terms in procedures, and

menu options.

쑺Italic type highlights notes and new terms where they are defined.

쑺Screen type represents information that appears on the screen or LCD.

Icon Description

Information notes call attention to important features or instructions.

In this manual, the term UPS refers only to the UPS cabinet and its internal elements.

The term UPS system refers to the entire power protection system – the UPS cabinet, the

battery cabinet, the IAC-D, and options or accessories installed.

The term line-up–and–match refers to cabinets that are physically attached to the UPS,

and the wiring between them is internal. The term standalone refers to cabinets that are

not physically attached to the UPS, and are wired with external contractor-supplied wiring.

Indice

Altri manuali Eaton UPS

Eaton

Eaton 3C3-EX Series Manuale utente

Eaton

Eaton Powerware 5110 Manuale utente

Eaton

Eaton Powerware 9140 Manuale utente

Eaton

Eaton 9PXM8S4K Manuale utente

Eaton

Eaton Powerware 9170+ UPS 3-18 kVA Manuale utente

Eaton

Eaton Powerware 5130 Rack/Tower UPS 1250-3000 VA Manuale utente

Eaton

Eaton ARRAY 3A3 Pro Manuale utente

Eaton

Eaton EX 700 Manuale utente

Eaton

Eaton Powerware 9170+ Manuale utente

Eaton

Eaton 93E60KMBSN Manuale

Eaton

Eaton Powerware 5125 Manuale utente

Eaton

Eaton Power-Sure 700 Manuale utente

Eaton

Eaton BladeUPS none Manuale utente

Eaton

Eaton 9355-F47 Unirom Manuale utente

Eaton

Eaton Single EBC Manuale utente

Eaton

Eaton Powerware 5115 Manuale utente

Eaton

Eaton 1000L Manuale utente

Eaton

Eaton Ellipse MAX 600 Manuale utente

Eaton

Eaton 9PX 5000i RT3U Netpack Manuale utente

Eaton

Eaton Ellipse ECO 500 Manuale utente

Eaton

Eaton 5S 1000 Manuale utente

Eaton

Eaton 5E Istruzioni per il montaggio

Eaton

Eaton 9SX Series Manuale utente

Eaton

Eaton 9PX5KiRTN Manuale utente

Manuali UPS popolari di altre marche

Pylontech

Pylontech Victron & Pylontech US5000 Manuale utente

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuale utente

Mecer

Mecer ME-1000-WTU Manuale utente

Mustek

Mustek PowerMust 530(B) Plus Manuale di installazione e funzionamento

Emerson

Emerson Liebert NXL series Manuale utente

MAKELSAN

MAKELSAN BOXER SERIES Manuale utente

Block

Block PC-0524-400-0 Manuale utente

CyberPower

CyberPower CP585LCD Manuale utente

CyberPower

CyberPower Office Tower Series UPS 1000 Manuale utente

CyberPower

CyberPower BM100 Manuale utente

Best Power

Best Power 610 Manuale utente

Best Power

Best Power Unity/I UT3K Manuale utente

Mustek

Mustek PowerMust 400 Offline Manuale utente

Xantrex

Xantrex Trace 512 UR-UPS Manuale utente

Forza

Forza SL-1501UL Manuale utente

LEGRAND

LEGRAND keor 310081 Manuale utente

ABB

ABB Conceptpower DPA 500 Manuale utente

ZincFive

ZincFive BC Series Manuale utente