ECD OvenRIDER NL2+ Manuale utente
QUICK REFERENCE GUIDE
1
CONTENTS
WELCOME .......................................................................................................................... 2
EQUIPMENT ....................................................................................................................... 3
FEATURES/FUNCTIONS................................................................................................. 3
SETUP................................................................................................................................. 4
CHARGING THE POWER PACK ...................................................................................... 4
SOFTWARE INSTALLATION............................................................................................ 6
SOFTWARE REGISTRATION........................................................................................... 8
COMMUNICATIONSv9
ZONE BOUNDARY MAGNET INSTALLATION................................................................. 11
OPERATION ...................................................................................................................... 13
INTRODUCTION ......................................................................................................... 13
STEP 1: SETUP INSTRUMENT...................................................................................... 14
STEP 2: DATA COLLECTION.......................................................................................... 19
STEP 3: DOWNLOAD DATA.......................................................................................... 22
2
WELCOME
This Quick Reference Guide is designed to help the user to familiarize themselves with the equip-
ment, perform basic hardware setup/communicaons and operaon. For detailed informaon
on both Hardware & Soware components, please refer to the Help system accessible in the
M.O.L.E.® MAP Soware.
To access the help system start the soware and use any of the methods listed:
• Select the Help Buon on the Toolbar.
• Pressing the shortcut key [F1]
• On the Help menu, click MAP Help.
3
EQUIPMENT
FEATURES/FUNCTIONS
Process and Ambient Sensors:
A combinaon of 3 thermal and
3 posion sensors that measure
oven performance.
Zone Sensor Baery:
This is the power source for the
zone sensor light.
Zone Sensor Light:
This light illuminates when
the detects zone boundary
magnets.
Thermal Barrier:
This is the protecve Ther-
mal Barrier for the M.O.L.E.®
Proler.
Connector Bridge:
This is where the M.O.L.E.®
Proler plugs into the RIDER.
Barrier Locking Latch:
Secures the cover of the barrier
to prevent it from opening.
Extractor Handle:
This disconnects the M.O.L.E.®
Proler from the connector
bridge.
A completely discharged Power
Pack takes about 8 hours to be fully
charged. For quick charges, it can be
charged for 15 minutes allowing one
10 minute data run to be performed.
②
①
4
SETUP
CHARGING THE POWER PACK
1. Insert the USB cable male series “A“ plug
into a computer USB Port.
2. Insert the USB cable male series “B” mini
plug into the Data/Charging Port.
A completely discharged Power Pack
takes about 14 hours to be fully
charged.
②
①
5
SETUP
CHARGING THE POWER PACK
1. Remove the Power Pack.
2. Plug the transformer end of the charger-
into a (120 or 230VAC) wall outlet and
the connector end into the Power Pack.
3. Once charged, reconnect to the
M.O.L.E.® Proler. The acvity light ash-
es once indicang the M.O.L.E.® Proler
is ready to collect data.
②
6
SETUP
SOFTWARE INSTALLATION
1. Insert the Flash Drive in a USB Port and
the AutoPlay menu appears.
2. Select Open folder to view les but-
ton on the AutoPlay menu to launch
Windows® Explorer. Closely follow the
instrucons for your operang system.
For detailed informaon view the Instal-
laon Help le on the Flash Drive.
The user must have administrator
permissions for the computer to in-
stall and register the soware. To
install as administrator, locate the
setup.exe on the installaon drive.
Right-click the le to display the
shortcut menu and select Run as ad-
ministrator.
7
SETUP
SOFTWARE INSTALLATION
③③
②
8
SETUP
SOFTWARE REGISTRATION
An Unlock Key can be obtained via an online
registraon form or using the contact infor-
maon supplied on the dialog box, contact
ECD.
1. On the Help menu, click Register and the
dialog box appears.
2. Select Online Registraon and enter the
required informaon on the M.O.L.E.®
MAP Soware Registraon form.
3. Enter the 16-digit Unlock Key and then
the Register command buon to com-
plete the soware Registraon.
When using a SuperM.O.L.E. Gold 2,
the AutoPlay panel appears in the
lower right corner of the desktop.
This panel displays the four most
common MAP commands.
②
①①
①
①
9
SETUP
COMMUNICATIONS
1. Plug the computer interface cable into a
computer COM Port and the other end
into the M.O.L.E.® Proler Data Port.
2. On the M.O.L.E.® menu, click the Select
Instrument command.
USB/RS-232
Adaptor
“B” mini plug
“A” plug
Indice
Altri manuali ECD Controllori
