Echelon I.LON 10 Manuale utente

i.LON™10 Ethernet

Adapter User’s Guide

Version 1

078-0195-01A

Echelon, LON, LONWORKS, LNS, LonTalk, LonBuilder,

LonManager, Neuron, 3120, 3150, LONMARK, NodeBuilder,

and the Echelon logo are trademarks of Echelon

Corporation registered in the United States and other

countries. LonMaker and i.LON are trademarks of Echelon

Corporation.

No part of this publication may be reproduced, stored in a

retrieval system, or transmitted, in any form or by any means,

electronic, mechanical, photocopying, recording, or

otherwise, without the prior written permission of Echelon

Corporation.

Printed in the United States of America.

Echelon Corporation

550 Meridian Ave

San Jose, CA 95126, USA

Preface

This document describes how to connect and configure the

i.LON10 LONWORKS adapter.

i.LON 10 Ethernet Adapter User’s Guide i

Welcome

The i.LON 10 Ethernet Adapter is a low-cost, high performance interface that

connects LONWORKS® based everyday devices to the Internet, a LAN, or a

WAN. Through the i.LON 10 Ethernet Adapter, appliances, meters, load

controls, lights, security systems, pumps, and valves can be connected to the

Internet via a DSL or cable modem, residential gateway, settop box, switch, or

hub. A local or remote service center running Echelon's LNS server can then

configure, monitor and control the devices - from across the room or across the

world.

Purpose

The i.LON 10 User’s Guide describes the hardware of the i.LON 10 Ethernet

Adapter and provides a description of the configuration web pages hosted by the

i.LON 10. See the i.LON 10 Ethernet Adapter Quick Start Guide for a detailed

instructions on connecting and configuring the i.LON 10.

Audience

The i.LON 10 User’s Guide is intended for use by network installers who need to

connect the i.LON 10 adapter to their LONWORKS network.

Related Reading

The i.LON 10 Ethernet Adapter Quick Start Guide – Describes how to connect the

i.LON 10 hardware and configure the Setup and Security web pages to begin

using the i.LON 10 Ethernet Adapter.

LNS Programmer’s Guide – Describes how to write LNS applications that can

take advantage of the communication provided by the i.LON 10 adapter.

LNS For Windows Programmer’s Guide, xDriver Extension– Describes how the

xDriver software can be used by an LNS application to manage communications

with multiple LONWORKS networks that communicate over a TCP/IP network.

Requirements

In order to use the i.LON 10, you must have the following:

• A PC with LNS 3 (Service Pack 7), Internet Explorer 5.0 or better, and an

Ethernet card.

• A free-topology or powerline LonWorks network.

Contents

The i.LON 10 product comes with the following:

• i.LON 10 Ethernet Adapter hardware.

• I.LON 10 CD. This CD contains LNS Service Pack 7, the i.LON 10 firmware,

and Adobe Acrobat versions of the documentation.

ii Preface

• Power supply. For the free-topology model, this is an Echelon model 780x0

series power supply; for the power-line model, this is a Tamura 425x12400P

power supply.

• i.LON 10 Ethernet Adapter Quick Start Guide.

For More Information and Technical Support

If you have technical questions that are not answered by the documentation you

can get technical support from Echelon. To receive technical support from

Echelon you must purchase one of Echelon’s incident-based support services.

Detailed information about these services may be found on the Echelon Services

home page at www.echelon.com/services. You can obtain technical support via

phone, fax, or email from your closest Echelon support center. The contact

information is listed in the following table.

The support programs and the information in the following table are subject to

change. See the Echelon Services home page at www.echelon.com/services for a

description of the current offerings and support contracts. Your i.LON

distributor may provide you with alternate contacts for support.

London San Jose Tokyo

Language English/French/

German/Italian

English Japanese

Hours

(Mon-Fri)

0900-1700 London

Time

8:30am-4:30pm PDT 0900-1700 Tokyo Time

Telephone +44 (0) 1923 430200 +1-408-938-5200

+1-800-258-4566 (US

and Canada only)

+81 3 3440 7781

Fax +44 (0) 1923 430300 +1-408-328-3832 +81 3 3440 7782

Email [email protected] lonsupp[email protected] [email protected]

i.LON 10 Ethernet Adapter User’s Guide iii

Table of Contents

Preface ........................................................................................................................................... i

Welcome...................................................................................................................................... ii

Purpose ....................................................................................................................................... ii

Audience ..................................................................................................................................... ii

Related Reading......................................................................................................................... ii

Requirements ............................................................................................................................. ii

Contents ..................................................................................................................................... ii

For More Information and Technical Support ........................................................................ iii

Table of Contents ...................................................................................................................... iv

1 Introduction........................................................................................................................... 1-1

The i.LON 10 Ethernet Adapter ............................................................................................ 1-2

How The i.LON 10 Ethernet Adapter Fits Into the i.LON Family of Products ................. 1-2

2i.LON 10 Ethernet Adapter Hardware ............................................................................ 2-1

i.LON 10 Ethernet Adapter I/O ............................................................................................. 2-2

Mounting the i.LON 10 Ethernet Adapter Hardware.......................................................... 2-4

i.LON 10 Hardware Specifications ........................................................................................ 2-5

3 Connecting and Configuring the i.LON 10 Ethernet Adapter .................................. 3-1

The i.LON 10 Ethernet Adapter Setup Page ........................................................................ 3-2

4i.LON 10 Ethernet Adapter Security ............................................................................... 4-1

i.LON 10 Ethernet Adapter Security .................................................................................... 4-2

Performing a Security Access Reset.................................................................................. 4-2

i.LON 10 Ethernet Adapter Security Web Page .............................................................. 4-3

5 Uploading i.LON Network Adapter Firmware and the User Web Page ................. 5-1

Uploading i.LON 10 Ethernet Adapter Firmware ............................................................... 5-2

Uploading a User Web Page................................................................................................... 5-3

Using the Microsoft®TFTP Client .................................................................................... 5-3

6i.LON 10 Ethernet Adapter Diagnostics ......................................................................... 6-1

i.LON 10 Diagnostics.............................................................................................................. 6-2

Viewing i.LON 10 Ethernet Adapter Status .................................................................... 6-2

Viewing the i.LON 10 System Log Web Page................................................................... 6-3

Performing a Self-test ........................................................................................................ 6-8

7 Establishing an Uplink Connection Through the i.LON 10 Ethernet Adapter..... 7-1

Uplink Connections ................................................................................................................ 7-2

A Using the Webconvert Utility .......................................................................................... A-1

The Webconvert Utility ..........................................................................................................A-2

Webconvert Utility Log Messages .....................................................................................A-3

iv Preface

Introduction

This chapter provides an overview of the i.LON 10 Ethernet

Adapter and how it fits into the i.LON family of products.

i.LON 10 Ethernet Adapter User’s Guide 1-1

The i.LON 10 Ethernet Adapter

The i.LON 10 Ethernet Adapter connects LONWORKS networks to remote LNS

Servers via a TCP/IP Ethernet connection. Multiple remote networks can be

connected to a single LNS Server. On the PC containing the LNS Server, a piece

of software called the xDriver manages communications between multiple

LONWORKS networks using i.LON 10 Ethernet Adapters and LNS Servers,

allowing for asynchronous and simultaneous updates (see the LNS Programmer’s

Guide, xDriver Extension for more information).

For example, imagine LONWORKS networks installed at 1000 separate hospital

buildings in different locations. Each network contains a LONWORKS device that

monitors the hospital’s emergency power generator for various alarm conditions.

Alarms initiate xDriver connections to an LNS service center where the alarm is

processed and dispatched.

The i.LON 10 Ethernet Adapter is available in two models, free topology and

power-line. The free topology model contains a TP/XF-FT-10 transceiver and can

be connected to a TP/XF-FT-10 LONWORKS channel. The power-line model

contains a PL-22 transceiver and can be connected to a PL-20 power-line

LONWORKS channel.

How The i.LON 10 Ethernet Adapter Fits Into the i.LON

Family of Products

The i.LON family of products consists of three product lines, the i.LON 10 line,

the i.LON 100 line, and the i.LON 1000 line. The i.LON 10 consists of network

adapters that are used to provide basic connectivity between a LONWORKS

network and a remote LNS Server. The i.LON 10 line is cost effective for home

and small building applications. The i.LON 100 line consists of devices that

combine network adapter and web server capabilities to allow a LONWORKS

network to be monitored and controlled using a web page hosted on the i.LON

100 device. The i.LON 100 also includes I/O that allows it to be connected to non-

LONWORKS devices and a variety of built-in functional blocks to provide

datalogging, scheduling, and alarming applications. The i.LON 1000 line

combines network adapter and web server capabilities and also functions as a

LONWORKS router providing the absolute highest performance possible. The

i.LON 1000 is designed for use in large, high-performance applications where

thousands of devices, possibly spanning multiple locations, are used in a single

network.

1-2 Introduction

i.LON 10 Ethernet Adapter Hardware

This section describes the hardware inputs and outputs for both

the free-topology and power-line models of the i.LON 10

Ethernet Adapter. It also provides a template that can be used

to mount the i.LON 10. See the i.LON 10 Ethernet Adapter

Quick Start Guide for step by step instructions on how to

connect the i.LON 10 Ethernet Adapter hardware.

i.LON 10 Ethernet Adapter User’s Guide 2-1

i.LON 10 Ethernet Adapter I/O

The two models of the i.LON 10 Ethernet Adapter (power line and free-topology),

have an identical form factor and have identical I/O with the exception of the

differing LONWORKS network connectors and the Band In Use LED on the

power-line model. The following diagram displays the i.LON 10 Ethernet Adapter

from the top and from the back, showing all hardware inputs and outputs.

i.LON 10 Ethernet Adapter, FT model

2-2 i.LON 10 Ethernet Adapter Hardware

Altri manuali per i.LON 10

Indice

Altri manuali Echelon Adattatore

Echelon

Echelon i.LON 10 Manuale utente

Echelon

Echelon SLTA-10 Manuale utente

Manuali Adattatore popolari di altre marche

PCB Piezotronics

PCB Piezotronics 090B274 Manuale utente

Auvidea

Auvidea J20 Manuale del prodotto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuale utente

Akribis

Akribis ITF-21-BISS-MIT Manuale utente

Tenda

Tenda W54U Manuale utente

ROHO

ROHO AGILITY Manuale utente

PROLiNK

PROLiNK WN2001 Manuale utente

Hawking

Hawking HUF2 Manuale utente

Airlink101

Airlink101 AWLC4030 Manuale utente

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuale utente

Philips

Philips SWA4554S/10 Manuale utente

JVC

JVC TS-C9D2B Manuale di istruzioni

NETGEAR

NETGEAR A6100 Manuale utente

D-Link

D-Link DWA-121 Manuale utente

Philips

Philips SWA2037 Manuale utente

Basalte

Basalte 0610-20 Manuale utente

Yealink

Yealink EHS40 Manuale utente

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuale utente