Echomaster MON-7022 Manuale utente
User Manual
7” Dash Mount Dual Input Monitor
MON-7022
3
tel - 1-800-477-2267 (East Coast) - 1-888-883-2790 (West Coast)
Installation Guide
2
Installation Guide
tel - 1-800-477-2267 (East Coast) - 1-888-883-2790 (West Coast)
Fitting Instructions
MON-7022
7” Dash Mount Dual Input Monitor
MON-7022
7” Dash Mount Dual Input Monitor
Introduction
Box Contents Key Features
u7” high resolution display
uDual video inputs
uDual triggers
uDash mount fan bracket included
uRemote control included
uUser Guide
uMonitor
uMounting Bracket
uMain Harness
uGX16-RCA Adapters x 2
uRemote Control
uSelf-Adhesive Pad
uAUX Input Harness
uSunshade
Operating Instructions
Thank you for purchasing your EchoMaster monitor.
EchoMaster monitors are designed to improve safety by providing
high quality images from camera inputs. This may help to improve vehicle
maneuvering capabilities by displaying blind spots or areas not normally
visible to the driver.
Please ensure you read and understand all aspects of this manual before
tting or using your EchoMaster mirror monitor.
Choose a mounting location that will not obscure the driver’s view. Also
please ensure that the unit is not mounted in a location that will obstruct the
operation of any airbags.
Ensure that the mounting area is clean and free of silicone as this will cause
the adhesive pad not to adhere.
Secure the bracket in place.
Once the unit is in place you can run the connections cable to behind the
dash where the connections are to be made as shown in the wiring diagram
of this manual.
To turn on the unit the vehicle ignition should be active. The POWER button
will turn the screen on.
The video input can be selected by pressing the CH1 or CH2 buttons.
The MENU button will scroll through all the various adjustments that are
available.
The + and – buttons will adjust the volume of the unit, and also when in the
menu structure they will adjust the various settings.
The MODE button will adjust the image parameters to one of 4
pre-determined settings.
5
tel - 1-800-477-2267 (East Coast) - 1-888-883-2790 (West Coast)
Installation Guide
4
Installation Guide
tel - 1-800-477-2267 (East Coast) - 1-888-883-2790 (West Coast)
Operating Instructions Wiring Diagram
MON-7022
7” Dash Mount Dual Input Monitor
MON-7022
7” Dash Mount Dual Input Monitor
All of these functions are replicated on the supplied remote control.
When a 12V input is detected on either trigger wire the unit will
automatically switch to the corresponding input. If the unit is currently turned
off when this trigger is detected it will automatically turn on and switch to that
input.
If the AUX input jack is inserted then it will override CH1.
Menu
Brightness: Adjust the brightness level of the screen between 0 and 40.
Contrast: Adjust the contrast of the screen between 0 and 40
Color: Adjust the color of the screen between 0 and 40
Volume: Adjust the volume of the built-in speaker between 0 and 40
(note that operating the arrow controls while NOT in the
menu will also adjust the volume).
Zoom: This will change from a 16:9 to a 4:3 ratio.
TCON: This allows you to adjust the orientation of the picture
between mirrored and non-mirrored and upside down or
normal. This allows you to use the monitor with a wide range
of cameras and sources in a wide range of applications.
ACC Time: This will set the delay time before the monitor reverts to the
previous state after a trigger has been detected.
Language: Change the language of the on-screen menus between
English, Turkish, German, French, Spanish, Portuguese,
Italian, Dutch and Chinese (simplied and traditional).
Reset: This will reset all menus to the default value.
AV1
AV2
VIDEO
AUDIO
Reverse Camera
Adapter Harness
Main Harness
AUX Harness
Filter &
Fuse Box
IN
OUT
+12V Ignition
GND
CH2 Trigger (Blue)
CH1 Triggger (Brown)
(Black)
(Red)
GND Out
+12V Out
(Black)
(Red)
1
23
4
POWER +12VVIDEO
AUDIO GROUND
Pin Out
Dimensions
7
tel - 1-800-477-2267 (East Coast) - 1-888-883-2790 (West Coast)
Installation Guide
6
Installation Guide
tel - 1-800-477-2267 (East Coast) - 1-888-883-2790 (West Coast)
MON-7022
7” Dash Mount Dual Input Monitor
MON-7022
7” Dash Mount Dual Input Monitor
MON-7022
Screen Size 7.0”
Aspect Ratio 16:9
Power Supply 12V DC
Resolution 800x480
Luminance 300
Contrast 500:1
TV Format AUTO
OSD Languages English
Video Inputs 2
Audio Inputs 2
Triggers 2
Current Draw 390mA
Operating Temperature -20C - +70C
IP Rating 30
Parking Guidelines No
Dimensions (mm) 210 x 134 x 74
Connection Type GX16
Specications
tel - 1-800-477-2267 (East Coast) - 1-888-883-2790 (West Coast)
15500 Lightwave Drive, Suite 202, Clearwater, Florida 33760
Woolmer Way, Bordon, Hampshire, United Kingdom
EchoMaster is a Power Brand of AAMP Global.
EchoMaster.com
Indice
