Ecom Instruments DS x10 Manuale utente
Bedienungsanleitung
Instruction manual
DS x10
i.roc x10
docking station
BAL_docking station DS x10 05.08.2005 10:45 Uhr Seite 1
1
Deutsch Seite 2
English Page 14
BAL_docking station DS x10 05.08.2005 10:45 Uhr Seite 3
14
Content
1. Interduction 15
2. Safety Advice 15
3. Faults and Damage 16
4. Safety Regulations 16
5. General Satety Instructions 17
6. Tecnical Data 17
7. Function description / Operating Instructions 17
7.1 Content of delivery / order numbers 18
7.2 Installing ActiveSync 18
7.3 Synchronising with your PC 19
7.4 Ports 20
7.5 Connecting to a PC 21
7.6 Replacement of the contact board 22
8. Repairs 23
9. Cleaning, Storage / Maintenance 23
10. Guarantee and Liability 23
11. Declaration of EC Conformity 25
BAL_docking station DS x10 05.08.2005 10:45 Uhr Seite 16
15
1 Interduction
The docking station DS x10 is an USB docking
station between the ecom i.roc x10 -Ex and a PC
with an USB port for the use outside hazardous
areas. All different i.roc x10 versions (41x, 51x, 61x)
can be used.
2. Safety Advice
These instruction manual contain information and
safety regulations that must be followed to ensure
safe and reliable operation of the unit under the
described conditions. Failure to follow the infor-
mation and instructions can have dangerous con-
sequences or may contravene applicable legisla-
tion.
Please take the time to carefully read through these
safety instructions before you start using the unit.
In the event of any doubt or discrepancies
(e.g. due to translation or printing errors),
the German version of the
instruction manual shall govern.
BAL_docking station DS x10 05.08.2005 10:45 Uhr Seite 17
16
3. Faults and Damage
If there is any reason to suspect that the safety of
the unit has been affected then it must be immedi-
ately withdrawn from use and precautionary mea-
sures taken in order to prevent any further use.
It is recommended that the equipment be then
sent back to the manufacturers for testing.
The safety and integrity of the unit may
be compromised by, for example:
- External damage to the housing.
- Exposure to excessive loads.
- Incorrect storage of the unit.
- Damage sustained in transit.
- Correct certification is illegible.
- Functionality errors occur.
4. Safety Regulations
The use of the docking station DS x10 meets the
requirements of the regulations providing that the
user observes and applies the requirements as
laid down in the regulations and that improper and
incorrect use of the unit is avoided.
BAL_docking station DS x10 05.08.2005 10:45 Uhr Seite 18
17
5. General Safety Instructions
- The device must not be brought into the
Ex-area.
- The device may be operated only with the
designated LG x10 charger.
6 Technical data
Ambient temperature: 0°C .... +45°C (32°F...113°F)
Storage temperature: -10°C .... +60°C (14°F...140°F)
Weight: ca. 1040 g (36,7 oz)
Dimensions: 134 x 120 x 120 mm
(5,3’’ x 4,7’’ x 4,7’’)
CE designation:
7 Functional description /
Operating Instructions
Please take the time to read carefully through
this instruction manual to ensure that you are
familiar with and can use all the functions on
your device. For you own safety and information
please read through the information on the
following pages!
BAL_docking station DS x10 05.08.2005 10:45 Uhr Seite 19
18
7.1 Content of delivery / order numbers
complete set # AS002795
-docking station DS x10
-USB cable
-adapter for i.roc x10
-contact board for adaptor
7.2 Installing ActiveSync
Note:
To ensure that synchronisation functions cor-
rectly, Microsoft ActiveSync 3.7 or higher
must be installed on your PC before you con-
nect the i.roc x10 and PC using the docking
station DS x10.
How to install Microsoft ActiveSync on your PC:
1. Insert the enclosed Companion CD into the CD
drive on your PC.
2. Select the link for installing Microsoft
ActiveSync.
# A0002797
-adapter for i.roc x10
-contact board for adaptor
# ET0002752
-contact board for adaptor
# A0002796
-docking station i.roc x10
-USB cable
BAL_docking station DS x10 05.08.2005 10:45 Uhr Seite 20
19
3. Follow the instructions given by the installation
wizard. You can obtain additional information
when installing ActiveSync by clicking on the
Help button.
4. Once ActiveSync has been installed on the PC,
connect the two devices using the docking
station.
Note:
Microsoft Outlook 98 or higher must be installed on your
PC to be able to synchronise emails with your i.roc x10 -
Ex pocket PC using Microsoft ActiveSync. If you do not
use Outlook, install the Microsoft Outlook 2002 software
from the companion CD. Microsoft Outlook Express does
not function with the i.roc x10 Pocket PC and
ActiveSync.
7.3 Synchronising with your PC
After installing ActiveSync, you can:
- set-up partnerships and use them to synchronise
data with a maximum of two PCs.
- select the data to be synchronised with your
i.roc x10 -Ex pocket PC, for example
contacts, calendar, inbox, tasks, favourites, files,
memos and AvantGo.
BAL_docking station DS x10 05.08.2005 10:45 Uhr Seite 21
20
Note:
To synchronise files, drag the selected files from your
PC into the synchronised folder on the i.roc x10 -Ex
pocket PC. If when you created the partnership, you
called the pocket PC "PC1", for example, the synchroni-
sed folder will also be called "PC1". During the synchro-
nisation process, the files are moved onto or from the
i.roc x10 -Ex Pocket PC.
7.4 Ports
1. Status LED
No i.roc inserted
charger LG x10 fits correctly to
mains voltage
An i.roc is inserted correctly and
connected charger
LG x10 fits correctly to mains voltage
Note:
The status LED shows not the charging state
of the i.roc, this is shown via the red LED on
the i.roc itself.
BAL_docking station DS x10 05.08.2005 10:45 Uhr Seite 22
21
2. pen holder
3. USB port for PC connection
4. port for charger LG x10
Note:
Always connect the DS x10 docking station
with an inserted and powered LG x10 charger
before connecting to a PC or the i.roc x10 -Ex.
7.5 Connecting to a PC
7.5.1 Unscrew the adaptor from the backside of the
docking station.
7.5.2 Screw the adaptor to the 5 pin charging plug on
the buttom side of the i.roc x10.
Note:
A reverse polarity with the
adaptor or contact board is not
possible. You can connect it to
the i.roc x10 in any direction.
BAL_docking station DS x10 05.08.2005 10:45 Uhr Seite 23
Indice
