EcoMotion MINI Pro Manuale utente
USER MANUAL!
Mini Pro
www.ecomotionbikes.com | cont[email protected]
Ó2019 Ecomotion Bikes
Warning!
In order to ensure your safety and to get the most out of your
eBike, please read this user manual carefully before the first
use.
2
Table of Contents:
Warnings 3
Definitions 6
Assembly instructions 6
Handlebar 6
Headlight & Front fender 7
Front wheel 8
Saddle 9
Pedals 10
Brake - sets adjustment 10
Handlebar height adjustment 11
Mounting & dismounting of battery 13
Folding the bike 14
Bike Inspection prior riding 15
The Display 15
Display settings 16
Display’s error symbols 17
The battery & charger 18
Charging of battery 19
Preserving of battery’s lifespan 20
Tips for proper use 21
Bike maintenance 21
More info & contact us 22
Malfunctions & solutions 23
3
Warning!
Cycling can be a hazardous activity even under the best of
circumstances. !Proper maintenance of your bicycle is your
responsibility as !it helps reduce the risk of injury.
Warning!
When using your e-bike at the first - time, ride it in a controlled
environment away from cars, obstacles, and other distractions.
Warning!
Parental supervision is advised for use under the age of 16
Warning!
User must be aware to all traffic laws & regulations prior to
using the product.
Warning!
your e-bike is exposed to wear and tear as well as high
pressure. !Various materials and components may react
differently to fatigue, wear or pressure.!In case the life
expectancy of a certain component has expired, it may fail
unexpectedly and even cause injury to the user. !Any form
of cracking, scratching, discoloration in high pressure
areas are indications that the component's integrity has
expired, and it must be replaced!
Warning!
Make sure that your e-bike's brakes are well tuned and
perfectly work before each ride.!Check the brakes' pads
before each ride.!Brakes' tuning and maintaining must be
performed in a bike store, by qualified mechanic.
4
Warning!
Accidents and falls may cause severe injuries and in
extreme cases even death!!Read this user manual
responsibly, with care and judiciousness!!Also, always
make sure that your e-bike is well assembled, well
maintained, and in a good condition according to this user
manual prior to riding!
Warning!
Braking distance is influenced by the road / trail condition
as well as weather condition, speed of riding & weight of
rider.
Warning!
This model is equipped with motor shut-off system which
controlled by the brakes.!Make sure that the system is well
operating before each ride.!In case the system failed, do not
use the e-bike and have it fixed at a certified bike store.!
Warning!
Cycling can be a hazardous activity even under the best of
circumstances.!Always use protective gear such as a
helmet and other shields as well as closed shoes, even for
a short ride!
Warning!
Avoid Storing the battery in extreme hot / cold
temperature.!Extremely low temperature may cause corrosion
and !extremely high temperature may cause battery swell,
!which will make the battery dangerous, and even can cause
battery explosion!!The recommended storage temperature for
the battery is between 50°-80°F.
5
Warning!
Do not leave the battery unattended in a closed vehicle!!The
vehicle may warm up by the sun and reach extremely high
temperature!
Warning!
Avoid exposing the battery to extreme temperatures (104°F or
higher) for prolonged period!
Warning!
The battery charger should be checked for physical damage
before each charge.!Make sure that the charger wire is not torn
or exposed and that its electrical plug is not damaged!!If you
notice any problem with the charger, DO NOT CHARGED the
battery with the charger.!The charger must be replaced!!
Warning!
DO NOT charge the battery without supervision!!DO NOT
charge the battery overnight while all people are !sleeping in
the house!!
Warning!
Improper assembly of the bike is dangerous, can cause bike /
component failure, resulting in injury to the rider!
It's your duty to contact us for explanation if any of the
instructions in this booklet are not clear to you or if you have
any question. It is always recommended to have a professional
bike shop for assembling your bike.
Warning!
This model designed for road and trails ride only. do not use it
for down-hills ride, jumps or decline stairs.
6
Definitions:
• PAS - Pedal Assist Support - a sensor that is located on the bottom
bracket, recognizes the pedals movement and operates the motor
accordingly to the PAS level which set on the display .
• TAG - Twist And Go - a throttle that located on the handlebar
activate the motor while it twisted.
Assembly instructions:
Handlebar:
• Prepare the handlebar stem by opening its top hoop.!!!!!!!
• Slide-in the handlebar into the stem and lock back its hoop.
Warning!
this model designed for a single grown rider only. It is
forbidden to use this bike by two users or more together at the
same ride. You may install a child seat on its back-rack, make
sure that your child weight not exceed 55 lbs. and that you use
the child seat according to its manufacturer’s instructions.
Warning!
Do not use the bike carrying over 270 lbs. in total weight (rider
& belongings).
7
• Straight up the stem and locked it into its place, by locking-up the
handlebar folding mechanism. (click in its lever into the stem).
• Adjust the handlebar so it will be aligned with the bike’s fork, re-open
the handlebar folding mechanism, tight- up the stem's central
screw, re-locked the handlebar folding mechanism, and then tight-
up both of the stem's sides screws.!!!!!!!!!
2. Headlight & Front fender:
• Assemble the headlight and the top hook of the fender to the forks
bow.
8
• Assemble the fender’s support pipes into the bottom of the fork
(from both sides).!
3. Front wheel:
• Unscrew the fork support rod from the bottom of the fork, and pull
out the plastic spacer from the brake caliper.
• Slide in the lock rod of the wheel into its place in the wheel’s hub
and close it with its screw nut from the other side.!!
!!
9
• Insert and lock the wheel into its place in the fork by closing the lock
rod lever.!
!!!!
!!!
4. Saddle:
• Open the saddle's hoop that located on the bike's frame, slide-in the
saddle into its place in the frame, and lock-back the hoop.!Make
sure that the saddle cannot turn to the sides or move up & down
after you are locking it into the frame.!!!!!!!!!!!
!!!!!
Warning!
The fork must hold the wheel in a way that the wheel does not
move to its sides or can be removed without opening the lock’s
lever.
Warning!
Make sure that the front fork turns easily sideways and not
jammed while you steering the handlebar. Make sure that
the bike's wires and brake tube are not jammed or
stretched during steering.
10
5. Pedals:
• Assemble both pedals to the bike by screwing them to the Crank &
pedals leg.!!!!!!!!!!
Brake-sets adjustment
Make sure that the brake pads are not rubbing or locking the front /
rear disc, while you're not pressing the brake-levers.
• In case in which the disc rubs / locked into the brake pads. Release
a bit both of the caliper screws (the screws that connect the caliper
to the fork), tightly press on the brake - lever and re-screw back the
screws into their place while continuously pressing on the lever.
Warning!
In order to avoid damage to frame that can lead for frame
sudden breaking, always make sure that the safety line that
marked on the saddle's tube is hidden from the eye while
locking the saddle into its place.
Notice!
For safe and comfortable riding, there should be clearance of
no less than 1-2 inches between the rider and the top tube of
the bicycle frame, while the rider straddles the bicycle with
both feet on the ground.
Altri manuali per MINI Pro
1
Indice
Altri manuali EcoMotion Bicicletta
