v
ECOScience ENERGY CENTRE INSTALLATION AND USER MANUAL
Edition: 01; Last updated: 2011-04-12
© ECOScience
TERMS OF WARRANTY
This is an extract from the ECOScience Terms of Warranty. See AA VVS
09 (general terms issued by industry associations) for full terms and
conditions. If the instructions set out in this documentation are not
followed, the obligations that would otherwise be incumbent upon
ECOScience under these terms shall not be binding. Due to the rapid
pace of development in the industry, we reserve the right to amend
specifications and modify parts.
• All products marketed by ECOScience are covered by a 2 year
warranty for design, manufacture and material defects that
commences from the date of installation.
• For the duration of the warranty, the installation engineer
undertakes to rectify any defects that occur, either by repairing and/
or replacing the product.
• If the purchaser wishes to resolve any defects himself, the product
must be examined beforehand by us or by a person we have
appointed. A separate agreement may be entered into regarding
repairs and costs.
• In the event of a defect, the installation engineer must be contacted
first.
• A defect means any departure from the normal standard, assessed
by an industry professional. Defects or deficiencies that occur due
to abnormal circumstances, such as mechanical or environmental
circumstances, shall not fall under the scope of the warranty.
• ECOScience shall therefore not be liable if the defect is attributed
to abnormal or varying water quality, such as chalky or aggressive
water, variations in electrical voltage or other electrical interference.
• Nor shall ECOScience be liable for defects if the installation and/or
maintenance instructions have not been followed.
• The product must be examined thoroughly on delivery. Any defects
discovered must be reported before the product is used. All defects
must be reported immediately.
• ECOScience shall not be liable for defects that have not been
reported within 2 years of the date of installation.
• ECOScience shall not be liable for ‘indirect’ damage/loss, including
damage to entities other than the product, for example personal
injury, damage to physical property or losses caused by operational
stoppage etc..
• Nor shall ECOScience be liable for compensation in the event of
any increase in energy consumption caused by a defect in the
product or the installation. For the rest, the provisions set out in AA
VVS 09 apply.
• If the product requires modification or to be serviced by a
professional, consult your installation engineer who will undertake
any necessary adjustments.
• When reporting defects, please state the product production
number, date of installation and details of the installation engineer.
