מ"עב םינפלואו ןורטאת תוכרעמ רואנד7444222 |-| 09sales@danor.com|www.danor.com| רגנה 'חר9ןורשה דוה ,
the product into the fly-case up-side-down.
4. After packed the product, put the accessory into the accessory case, then closed and lock the
fly-case.
5. Fly-case only up stacked two layers. Prohibited upside down
6. When packed with carton box, equipment should be put into the foam first, then set into a
carton, pay attention to the vertical position.
6.4 UNPACKING
Note: Before unpacking check the damage is whether due to the transportation or not, if you
find any such damage, please do not use this item, and contact with the dealer or
manufacturer as soon as possible.
1. Open the fly-case, and discover the inside plastic bag.
2. High-lift the product by two handles beside the bottom base and move it out.
3. Before power on, make sure you have opened the X, Y axis lock!
7. INSTALLATION STANDARD
7.1 INSTALLATION RIGGING
The product can be placed on the stage or installed on the bracket in any direction. The
quick lock system can quickly and easily press 2 directions to lock on the bracket.
7.2 DEVICE FIXED
1.Before installation, it must be verified that the rigging equipment clamp is not damaged and can
bear at least 10 times of the weight of the equipment, and that the building can bear at least 10
times of the total weight of the equipment and the fixture fuse accessory equipment;
2.The fixture is installed on the base of the lamp body, the fastener is inserted horizontally into the
mounting hole of the base, the handle of the fastener is grasped and rotated clockwise for 1 / 4 turn
to lock, and other fasteners are installed in the same way.
3.Verify whether the horizontal and vertical locks have been opened, and verify that there are no
inflammables or other nearby inflammables within 3 meters of the device.
7.3 Device connection
Attention!
Must use two clamps fix the fixture,and tighten the clamps with1/4 lock, only fully
clockwise rotate 90 °then can lock the fasteners. Add one safety insurance rope on the hole of
light base. pls attention not connect to the transport handle.
Attention! One product only can accept one input one output.DMX512 cable must use the
professional shielded twisted pair cable; standard loudspeaker cable is not reliable to control the
long-range data. 24AWG cable is suitable for more than 300 meters long-distance signal
