ECOWITT WH55 Manuale utente
1
Wireless Multi-channel Water Leak
Detection Sensor
Model: WH55
Contents
1. Introduction..................................................3
2. Get Started................................................... 4
2.1 Parts List............................................ 4
3. Overview......................................................5
3.1 Features..............................................7
2
4. Setup Guide..................................................8
4.1 Install batteries...................................8
5. Sensor Placement.......................................14
6. Wi-Fi Configuration with gateway............15
6.1 Pair with Gateway............................15
6.2 Wi-Fi Connection for the Gateway..17
7. View Online Data with WS View.............. 17
8. Set Email Alerts......................................... 20
9. Specification.............................................. 22
10. Warranty Information...............................23
3
1. Introduction
Thanks for purchasing this WH55 wireless
multi-channel water leak detection sensor. The
alarm will be triggered when water seepage is
detected. The wireless signal can be received
by the GW1000 Wi-Fi Gateway(sold
separately) and the sensor data can be viewed
on our WS View mobile application after the
Wi-Fi configuration done. This device will
also work with the HP2551/HP3500/HP3501
weather station(all sold separately) in the
future.
To ensure the best product performance, please
4
read this manual and retain it for future
reference.
2. Get Started
2.1 Parts List
One Multi-channel Water Leak Sensor
One User Manual
5
3. Overview
Figure 1: Multi-channel Water Leak Sensor
6
1 Buzzer (inside the device)
2. Battery cover
3. LED indicator
4. Dip switches for multi-channel
5. Sensor contact
Table : Sensor parts identification
7
3.1 Features
Detects water seepage every 3 seconds.
Emits loud alarm with 90dB once triggered.
High or low sensor sensitivity selectable to
meet different requirements.
Works with GW1000 Wi-Fi gateway (sold
separately) to complete the wifi
configuration on WS View application.
View live sensor data on the app once wifi
configuration done.
Email alerts available once the gateway
device added successfully on our free
Ecowitt Weather Server:
https://www.ecowitt.net.
Each GW1000 gateway supports to add up
8
to 4 channels water leak sensors. Channel
names can be edited both on the app and
Ecowitt Weather Server.
Battery power level display on the WS View
App
4. Setup Guide
4.1 Install batteries
1.Remove the battery door on the back of the
transmitter(s) by taking off the cover, as shown
in Figure 2 .
9
Figure 2: Battery installation
10
2. Before inserting the batteries, find the dip
switches instruction above the battery
compartment and set the sensor sensitivity
level and channel number:
Sensitivity Level: To change the sensor
sensitivity of detection (High or Low), change
Dip Switch 3, as referenced in Figure 3.
High sensitivity: The water leakage alarm will
be triggered when the detected water leak
capacitance value equals to or over 60PF and
be muted when the value equals to or lower
50PF.
Indice
Altri manuali ECOWITT Accessori
ECOWITT
ECOWITT WH41 Manuale utente
ECOWITT
ECOWITT WH40 Manuale utente
ECOWITT
ECOWITT WH51 Manuale utente
ECOWITT
ECOWITT WH51 Manuale utente
ECOWITT
ECOWITT WS80 Manuale utente
ECOWITT
ECOWITT WH57E Manuale utente
ECOWITT
ECOWITT WH57 Manuale utente
ECOWITT
ECOWITT WN51E Manuale utente
ECOWITT
ECOWITT WH55E Manuale utente
