3.1.2 Button Function
The black button is used for the following two modes:
Wi-Fi Configure Mode: Press and hold the button for
about 5 seconds until the Wi-Fi status LED is fast flashing
indicating the gateway is ready for Wi-Fi configuration.
Reset Mode: Press and hold the button for about 10
seconds will reset the gateway and clear the history data.
Note:
1. When powered up, and when there is no valid Wi-Fi
configuration (including very first time), the Wi-Fi
status LED will be fast flashing. It means that the
gateway is in the Wi-Fi configuration mode. Use the
mobile application to complete the configuration
process.
2. If you purchased optional sensor(s), you can power up
the new sensor at any time and use mobile
application’s live data view to confirm whether the
sensor has been added successfully.
3. To add multi-channels sensors WH51 or
WH41(optional), GW1000 firmware V1.4.6 or above
will be required. No specific channel sensor needed
to purchase, for each new sensor will be recognized
as a new channel according to the Power-on
sequence on the app.
Please follow the operation tips:
1. Go to your app store and download the latest WS
View app and install it.
