ECOWITT WN34BL Manuale utente
1
Temperature Sensor
Model: WN34BL
Contents
1. Getting Started............................................ 2
1.1 Parts List........................................... 2
2. Overview.................................................... 3
2.1 Features ............................................ 4
3. Setup Guide................................................ 6
3.1 Installing battery............................... 6
4. Sensor Placement ....................................... 9
5. Wi-Fi Configuration with gateway........... 12
5.1 Pair with Gateway.......................... 12
5.2 Wi-Fi Connection for the Gateway. 14
6. View Online Data with WS View............. 14
7. Set Email Alerts........................................ 16
8.Specification.............................................. 17
9.W FCC Statement...................................... 18
2
1. Getting Started
1.1 Parts List
One Temperature Sensor
One Mounting bracket for sensor
One Hose clamp for mounting to pole
One Hexagon M12 screw for mounting
One Screw ST D3.2*M2.0*6 for mounting
One User Manual
3
2. Overview
Figure 1: Temperature Sensor
4
This temperature sensor is mainly used to test
water temperature.
2.1 Features
Temperature Sensor
Measures temperature with a 3m (10ft)
cabled sensor
Extended wireless range up to 300 feet
(100 meters) in open areas.
Transmits readings every 77 seconds.
IP65 waterproof.
LCD display for current reading.
When paired with a GW1000/GW1100
Wi-Fi Gateway:
5
View temperature reading on the Live Data
page of the WS View app (requires that the
gateway and your phone are using the same
Wi-Fi network).
Up to 8 channels supported. Channel
names can be edited on the app.
Battery level information displayed on the
WS View App.
When paired with a Weather Station
Console (HP2551/HP3500/HP3501):
View temperature data in real-time on the
Display.
Up to 8 channels supported. Channel
names can be edited on the console.
When uploaded to Ecowitt Weather Server:
6
View current temperature data, history
records and graph on the website.
Receive email alerts from the server.
Remote monitoring with smart phone,
laptop, or computer by visiting the website.
3. Setup Guide
3.1 Installing battery
1. Remove the battery door on the back of the
transmitter by removing the screw, as shown in
Figure 2:
7
Figure 2: Battery installation
8
2. Insert one 1.5V AA battery (be aware of
polarity: flat side of the battery goes to the
spring side of the battery compartment).
The temperature reading will display on the
LCD screen immediately and will normally
update every 77 seconds (the sensor
transmission update period).
Note: If there is no reading on the screen,
make sure the battery is inserted the correct
way or a proper reset happens. Make sure the
battery is inserted correctly. Do not install the
battery backward.
4. Close the battery door by installing the
screw.
9
4. Sensor Placement
To mount the unit on a wall or wooden beam:
Use a screw (Screw ST D3.2*M2.0*6) to
fix the bracket on the wall, and then insert
the probe through the hole of the bracket,
as shown on figure 3-1:
Figure 3-1: Sensor mounting
10
Fix the sensor to the bracket with the
Hexagon M12 nut and tighten the screw
as shown on figure 3-2: (hand turn the nut
until firm, and then use a wrench to turn
1/3 ~ 1/2 turn and no more. Do not over
tighten.)
Figure 3-2: Sensor mounting
Indice
Altri manuali ECOWITT Regolatori di temperatura
