Ecutool ATC430 Manuale utente
Menu
SUMMARY ......................................................... 2
FUNCTIONAL DESCRIPTION ........................... 4
The main menu interface and system
settings ....................................................... 4
Turn on/off and charge................................ 5
The first time to use the trip computer ........ 6
Mode display description: ........................... 9
Odometer and fuel consumption............... 13
Alarm prompt ............................................ 15
SYSTEM SETTINGS ........................................ 17
Instrument settings ................................... 17
Alarm settings........................................... 18
Vehicle testing .......................................... 19
Fuel consumption setting.......................... 20
SOFTWARE UPDATING .................................. 22
- 2 -
SUMMARY
The Trip-Computer is a versatile, all-round
customer-facing vehicle information display
terminal, by using the smart trip-computer, we can
get all kinds of vehicle information, real-time
monitor vehicle condition data, and can do timely
and effective alarm of the vehicle abnormal
condition.
The Trip-Computer is not just a vehicle
information display system but also a very
powerful set of fault detection equipment, through
a unique fault diagnosis technology to know
whether the vehicle is defective, and clarify the
fault information in the form of text, users can find
fault during the warranty as soon as possible, so
that users can make appropriate treatment to
protect the interests of the owners.
The Trip-Computer software supports a
variety of Windows CE-based portable navigation
device, in usage; you need to install the smart trip
computer stents used in conjunction with the
smart trip computer. The hardware configuration is
as follows:
- 3 -
Operating system: Windows CE.Net 6.0 or
higher
CPU frequency: 600MHz
System Memory: 128M
SD card capacity: 4G
Display: 4.3 inch, 5 inch or 7
inch LCD touch screen
- 4 -
Functional description
The main menu interface and system settings
After starting the smart trip computer, it will
automatically enter the “MTC” software, the
system first display the main menu interface, as
shown in the figure below:
Subsequently, the system will automatically
start the "Smart Trip-computer” software if it does
not start automatically, you can click the "Settings
" in the " Path settings" to open the function
In the main menu, click "GPS", "Oil statistics"
or "Radar safety warning", it can start the
appropriate software respectively. Click the button
of the power, smart trip computer will automatically
shut down.
Under the main menu, click "Settings" to enter
- 5 -
the system setting interface, as shown below:
“Information": Displays the software version
of MTC.
"Path settings": used to set the path of the
“smart trip computer” software, “GPS” software
and "Radar safety warning" software, to make a
software boot start automatically, please check the
back of the select box for reference
"Language”: Select the language of the
software.
"Charging switch": used to open or close the
intelligent charging of the smart trip computer.
Turn on/off and charge
Under normal conditions of use, the smart trip
computer run MTC software after starting, users
can click the button on the main menu to start the
- 6 -
other software. When smart trip computer
software is running, if vehicle turned off, the smart
trip computer will automatically shut down
When smart trip computer in the normal use
state, after MTC software started it will open the
automatic charge function. When vehicle turned
off, or in the main menu, select "exit" the system
will automatically shut down to protect the car
battery discharge." system Settings" in the main
menu interface, users can also manually open or
close the charging function
If the smart trip computer main unit can’t be
turn on due to lack of electricity ,you can turn off
the main switch on the unit holder and later turn
on , then the system will automatically charging for
5 minutes to ensure the main unit to turn on and
work normally .
The first time to use the trip computer
When you use the trip computer in the first
time, system will automatically initialize setting up .
The screen will display as bellowing picture,
please follow the graphical representation to
install the product and ensure the safe and reliable
connection , later you can start the car , follow with
the tips on the screen and click with “OK”
successively .
- 7 -
The trip computer will scan the vehicle
supported communication protocol automatically.
After finish the scan, the trip computer will list out
all the supported communication protocol and
supported data stream items for this car, the user
can choose the suitable commutation protocol,
generally it should be choose with that item with
high data stream.
- 8 -
Then choose the user’s vehicle brand, and
press “OK” button, the trip computer will display
the car brand icon when the software start on.
After use for the trip computer with some
- 9 -
times, you can also recover the system to the
factory setup status. The details way is: when start
with software, after display with the vehicle brand
icon, click with the bottom “Factory settings”, and
click with “OK” later on
When the trip computer is used in one car
normally, if you want to change to use on another
car, you must set it to the “Factory settings”.
Mode display description:
Idle mode is an interface display under the
state of key-on or idle situation. As shown below:
- 10 -
Under the idle mode, the system default show
with bellowing data: water temperature, engine
speed, battery voltage, current time, current date,
current week, current location longitude and
latitude, intake air temperature, Average Fuel
consumption (History), Real-time Fuel
consumption (Static).
Cruise mode and Sport mode is a status of
car driving display interface, as bellowing:
Questo manuale è adatto per i seguenti modelli
5
Indice
