Edge-Core WA2121 Manuale utente
www.edge-core.com
User Guide
Powered by Accton
WA2121
IEEE 802.11b/g Mini AP Router
User Guide
Guide
IEEE 802.11b/g Mini AP Router
IEEE 802.11b/g Wireless Router
WA2121
E062007-EK-R01
149100040200E
Table of Contents
Chapter 1: Introduction 1-1
Package Checklist 1-1
Hardware Description 1-2
LED Indicators 1-3
Ethernet RJ-45 Ports 1-3
Power Socket 1-4
Reset Button 1-4
WPS SET Button 1-4
Chapter 2: Installation 2-1
Router Mode 2-1
Bridge Mode 2-2
Chapter 3: Network Planning 3-1
Internet Gateway Router 3-1
LAN Access Point 3-2
Wireless Client 3-2
Wireless Bridge 3-3
Chapter 4: Initial Configuration 4-1
Logging into the Web Interface 4-2
Using the Setup Wizard 4-3
Chapter 5: System Configuration 5-1
System 5-3
Settings 5-3
Password 5-4
Backup and Restore 5-5
DynDNS Settings 5-6
Syslog Settings 5-7
Firmware Upgrade 5-8
WAN 5-9
WAN Settings 5-9
LAN 5-11
LAN Settings 5-11
Contents
Wireless1 5-13
Wireless-VAP1 Settings 5-13
MAC Filter Settings 5-18
Wireless2 5-19
Wireless-VAP2 Settings 5-19
WMM Settings 5-20
QoS 5-21
QoS Settings 5-21
Advanced Settings 5-22
DMZ 5-24
Status 5-25
System 5-25
Interfaces 5-26
Events Log 5-27
DHCP Clients 5-28
PPPoE 5-28
WLAN Stations 5-29
About 5-29
Reboot 5-30
Appendix A: Troubleshooting A-1
Appendix B: Specifications B-1
Appendix C: License Information C-1
The GNU General Public License C-1
Glossary
1-1
Chapter 1: Introduction
The Mini AP Router is an IEEE 802.11b/g wireless gateway router that connects your
Internet access device (cable or ADSL modem) to your PC or local area network, or to
its own secure wireless network.
The Mini AP Router can be automatically configured with other Wi-Fi Protected
Setup (WPS) devices by simply pressing its WPS SET button. For more detailed
configuration, the unit can also be set up through its easy-to-use web interface.
Package Checklist
The Mini AP Router package includes:
• Mini AP Router (WA2121)
• RJ-45 Category 5 network cable
• AC power adapter
• Quick Installation Guide
• User Guide CD
Inform your dealer if there are any incorrect, missing or damaged parts. If possible,
retain the carton, including the original packing materials. Use them again to repack
the product in case there is a need to return it.
Introduction
1-2
1
Hardware Description
Top Panel
Bottom Panel
Ethernet WAN
RJ-45 Port
Power
Socket
Antenna
Ethernet LAN
RJ-45 Port
WPS SET Button
Reset Button
Wall Mount Slots
Hardware Description
1-3
1
LED Indicators
The
Mini AP Router
includes four status LED indicators, as described in the following
figure and table.
Ethernet RJ-45 Ports
The
Mini AP Router
has the following RJ-45 ports:
• The RJ-45 LAN port is for connection to a PC or to a 10/100 Mbps.
• The RJ-45 WAN port is for connection to a DSL or cable modem, or to a LAN or
other device that provides your Internet access.
Both ports auto-negotiate the operating speed to 10/100 Mbps, the mode to half/full
duplex, and the pin signals to MDI/MDI-X. Automatic MDI/MDI-X support enables
you to use straight-through cables for all network connections to PCs, switches, or
hubs.
LED Status Description
POWER On Green Indicates that the system is working normally.
WAN On/Flashing Green Indicates a valid link on the WAN Ethernet port. Flashing indicates
network activity.
Off The Ethernet port has no valid link.
LAN On/Flashing Green Indicates a valid link on the LAN Ethernet port. Flashing indicates
network activity.
Off The Ethernet port has no valid link.
WLAN On/Flashing Green Indicates the 802.11b/g radio is enabled. Flashing indicates
wireless network activity.
Off Indicates the 802.11b/g radio is disabled.
Power
LAN Link/Activity
802.11b/g Link/
Activity
WAN Link/Activity
Introduction
1-4
1
Power Socket
The
Mini AP Router
does not have a power switch. It is powered on when connected
to the AC power adapter, and the power adapter is connected to a power source.
The power adapter automatically adjusts to any voltage between 100-240 volts at 50
or 60 Hz. No voltage range settings are required.
Reset Button
The Reset button can be used to restart the Mini AP Router or restore the factory
default configuration. If you press the button for less than 5 seconds, the
Mini AP
Router
will restart. If you press and hold down the button for 5 seconds or more, any
configuration changes you may have made are removed and the
Mini AP Router
is
restored to its factory default configuration.
WPS SET Button
Use the WPS SET button on the Mini AP Router to automatically connect multiple
devices to the network. Within two minutes, press the physical or virtual button on
wireless client devices to enable them to join the WLAN.
The WPS configuration process may be initiated on any device and there is no
restriction to the order in which buttons are pressed.
Note: Any WPS-compatible devices could unintentionally join the WLAN if they are
within range during the two-minute set up period after the WPS SET button is
pressed.
Indice
