Edge Evo HT2 Manuale utente
Quick Tunes
Advanced Tunes
See tuning sections
BASIC MENU LAYOUT
WARNING: Misapplication or misuse of this product could lead to a
serious or fatal accident. Comply with all safety information in this
manual, and your vehicle owner’s manual. Follow safety, installation
and operating instructions in this User Manual to assure proper use.
Some of the menu options or features displayed in this manual are
vehicle specic, and may not be available for your make and model.
LIST OF COMPONENTS
DISPLAY DEVICE
BUTTON FUNCTIONALITY
NAVIGATING TIPS:
• To move back to the previous menu,
press the button.
• To move forward to the next menu, you
can press either OK or button to
enter the highlighted option.
• The & buttons are used to select
menu options, as well as adjust values for
certain features.
Up_Increase
Right
Next
Forward
Left
Back
Exit
Down_Decrease
OK
USB CABLE
BEFORE YOU BEGIN
CARB/EPA COMPLIANCE
NOTE: The stickers included in some products apply to products
that have received CARB exemption for emissions compliance.
This product may meet the emissions compliance
requirements of the California Air Resources Board
and Federal Environmental Protection Agency. If so,
it is legal for sale and use on pollution-controlled
vehicles operated on public streets and highways.
The device must be installed and operated
according to the instructions provided in this user’s manual. Included with
these compliant products is a sticker (similar to the one pictured above)
for you to keep in your vehicle. You can either adhere it somewhere on
the vehicle (e.g., the inside end of driver’s door) or simply store it in your
glove box. The purpose of these stickers is to inform anyone who may have
questions regarding the use of your Edge Products product and how
it affects emissions.
1
2
3
6
7
8
CAUTION: Do not unplug the USB while
the device is being updated. Once the
update is complete, you will be informed
that it is safe to disconnect.
4
5
Ignition
Quick Tune = Changes the power level of your
vehicle using the most popular features and settings.
NOTE: Not all features are available on every make, model,
and engine.
QUICK TUNE
STEP 1 - Plug the device into the OBDII port.Pl
(The device will automatically power-on once it has
been connected.)
CAUTION: Do not remove or bump the OBD-II connector
during any programming sequence. If you do, the vehicle
may not start.
CAUTION: Do not program your vehicle while parked in
unsafe locations including heavy trafc or places without
cell phone service and the internet (if possible).
STEP 2 - Enter
the Tuning Menu
by pressing OK.
STEP 3 - Turn
the ignition on,
but do not start
the engine.
STEP 4 - Follow
the on-screen
instructions.
STEP 6 - Select a
tuning level.
Loading your
Vehicle
Application...
Please Wait
STEP 5 - Allow
the device to save
your stock les.
Stock Files are Saved
Successfully!
Press OK to continue
Select Tuning
Page 1 of 1
Performance
Tow
87 Octane
Stock w/ Options
STEP 7 - Push left
arrow to close out
of custom options.
STEP 8 - Install
the “Tune” File by
pressing OK.
STEP 8 - Turn the
Ignition Off. Press
OK to continue.
Do you want to
customize options?
Install the Performance
File?
KEY:
x= Towing is not recommended for this tune .
S= Octane Requirements vary for gas vehicles. Follow recommended guidelines
on the device.
$=TowrateduptoEdgeProductsrecommendedtowlimits. Seelimitsforyourvehicle
displayed by the HT2 during the programming process.
0= Tow rated up to OEM max towing recommendation.
Availability of specific tunes may vary based on your vehicle’s make and model:
xSPerformance - Designed for maximum engine and transmission performance.
---------------------------------------------------------------------------------------------------------------------------------
x87 Performance - Designed for non-towing applications and requires the use
of 87 octane gas for best results.
---------------------------------------------------------------------------------------------------------------------------------
x91 Performance - Designed for premium horsepower, torque, and driveability.
The tune is calibrated for 2WD, 4WD-HI, and 4WD-LO. Requires 91 octane gas
for best results.
---------------------------------------------------------------------------------------------------------------------------------
x93 Performance - Designed for maximum horsepower, torque, and driveability.
The tune is calibrated for 2WD, 4WD-HI, and 4WD-LO. Requires 93 octane gas
for best results.
---------------------------------------------------------------------------------------------------------------------------------
x87 Octane - Designed to allow you to run 87 octane regardless of the
manufacturer’s recommendation.
---------------------------------------------------------------------------------------------------------------------------------
S$Light Load Tow - Optimizes engine and transmission performance for mid-
weight range towing applications
---------------------------------------------------------------------------------------------------------------------------------
0Heavy Load Tow - Requires the use of 91 octane gas or better and is used for
optimized engine and transmission performance for heavy towing applications.
---------------------------------------------------------------------------------------------------------------------------------
TUNING LEVELS EXPLAINED
Towing - Requires the use of 91 octane gas or better and is used for optimized
towing up to the OEM recommended towing limits. This tune is safe to use in 4WD-
HI or 4WD-LO.
NOTE: If a towing tune is not available, use 87 Tune with 91 Octane fuel.
-------------------------------------------------------------
xExtreme - This is an aggressive tune used for maximum horsepower, torque,
and driveability.
----------------------------------------------------------------------------------------------------------------------------------
Mileage XS - Requires 87 octane gas and is used for fuel mileage gains. The tune
is calibrated for 2WD, 4WD-HI, and 4WD-LO uses.
----------------------------------------------------------------------------------------------------------------------------------
Stock - Returns vehicle to factory stock. Removed all Edge Products tuning from
your vehicle. It is recommended that you calibrate your vehicle back to stock prior
to taking it in for service or maintenance.
STEP 2 - Enter
the Tuning Menu
by pressing OK.
STEP 3 - Follow
the on-screen
instructions.
STEP 4 - Select a
tuning level.
Select Tuning
Performance
Tow
87 Octane
Mileage XS SAVE
Stock w/ Options
STEP 1 - Plug
the device into
the OBDII port.
ADVANCED TUNING
Change the power level of your vehicle using custom options and settings.
NOTE: Not all features are available on every make, model, and engine.
CAUTION: Do not remove or bump the OBD-II connector during any
programming sequence. If you do, the vehicle may not start.
CAUTION: Do not program your vehicle while parked in unsafe locations
including heavy trafc or places without cell phone service.
Indice
