c. Specify the location where you saved the driver file (from Step 2 above) and click “Next”.
d. Click the “Next” button to install the driver.
e. After installing the driver, click the “Finish” button to complete the driver installation. (Note: after this
step,
the “Add New Hardware Wizard” may reappear. This is normal. Repeat the above steps to completely
install the driver)
f. Restart the computer.
Format Using the Windows Format Function
1) Ensure the USB Disk switch is set to USB.
2) Connect your DiskGO!TM MP3 Player + USB Flash Drive to the computer using an available USB port, then
open “My Computer”.
3) Right-click on the Removable Disk icon for the drive letter corresponding to your device and select
“Format”.
4) Select the file system to use. If you anticipate using your DiskGO!TM MP3 Player + USB Flash Drive on both
PCs and Macs, use the FAT or FAT32 file system.
5) If you do not wish to delete the data, or need to back up the data to another device (like your hard drive),
select “Cancel”; otherwise select “OK” to proceed. The progress bar indicator displays the status of the
format process. When the format is complete, you will see the following message: “Format Complete!”.
6) Click “OK” to return to Windows.
Format Using MacOS
1) The USB Disk switch can be set to ON or OFF for flash drive usage (Note: switch must be set to ON for
battery to charge).
2) Connect your DiskGO!TM MP3 Player + USB Flash Drive to your computer’s USB port.
3) Once the device appears on your desktop (usually titled “No_Name”), open your computer’s main hard
drive – the one with your active system folder.
4) Open the Applications folder, then open the Utilities folder.
5) Double-click on the “Disk Utilities” icon to launch the program.
6) In the left pane, single-click to select the device named “XXXMB Removable Disk”.
7) Click on the “Erase” tab. Select the appropriate option for your system.
a. If you are using your DiskGO!TM MP3 Player + USB Flash Drive on both Macintosh and PC
computers, select “MS-DOS”.
b. Enter a label for your DiskGO! here, if necessary.
8) Once you have selected the options you wish to use, click the “Erase” button. Once the Disk Utility is
complete, you can close the Disk Utility and begin using your USB Flash Drive.
Removing the DiskGO! Safely
Please follow the directions below to safely remove your device.
· Windows 98SE: Unplug ONLY when the device is in standby mode. The LED Indicator blinks while reading
and writing data.
· Windows ME/2000/XP: Use the “Unplug or Eject Hardware” icon in the system tray to safely stop the
DiskGO! device.
· MacOS: Drag the “Removable Disk” icon to the Trash Bin and wait for indication that you can safely
remove the device.
· Linux: You can safely remove the DiskGO!TM MP3 Player + USB Flash Drive after you use the “Unmount”
command.
REC (MIC recording & playback) Mode:
The DiskGO!TM MP3 Player + USB Flash Drive device contains a built-in microphone near the headphone
jack. The device uses the microphone to save voice recordings to the internal disk as WAV files. These
recordings can be played back through the device itself, or copied to your computer for playback.
MIC Recording
1) Switch the device to ON (Green LED will light up for several seconds, then go off).
2) Switch the MP3/REC switch to REC. Press Pause/Play button for 2 seconnds and release. A solid yellow LED
will appear.
3) Press Play/Pause quickly again to begin recording. Recording begins when the LED blinks red and yellow.
4) Press and release Play/Pause to stop recording. The LED will return to solid yellow.
WAV playback
1) Switch the device to ON (Green LED will light up for several seconds, then go off).
2) Switch the MP3/REC switch to REC. Press Pause/Play button for 2 seconnds and release. A solid yellow LED
will appear.
3) Press and release Play/Pause to begin playback. The LED will blink yellow and red during playback.
327 East 14th Street / Ada OK 74820 (800) 332-6581 / (580) 332-6581 / www.edgetechcorp.com
EDGETM is a trademark of EDGE Tech Corp. Trademarked words or logos used herein are property of their respective owners.
IMPORTANT
PLEASE CONTACT A QUALIFIED TECHNICIAN FOR ASSISTANCE IN INSTALLING THIS PRODUCT IF YOU ARE NOT
FAMILIAR WITH DOING SO. ANY INSTRUCTIONS INCLUDED WITH THE PRODUCT ARE FOR CONVENIENCE ONLY
AND ARE NOT INTENDED TO BE ALL-INCLUSIVE.
