EdgeStar CW1200 Istruzioni per l'installazione
Reassembly of the coin trap/lint trap component of the EdgeStar Washer Dryers
If the end piece of the coin trap component on EdgeStar combination washer dryers is
fully unscrewed, the component can come completely apart. Here is how you re-assemble
it.
1. Start with the pieces shown in the order below.
2. Put the rubber gasket onto the end of the long gray piece, as show below.
3. Put the white piece onto the gasket, as shown below.
4. Lightly screw the remaining piece onto the assembly, as shown below.
5. Now the component is reassembled and can be reinserted (and then tightened)
into the combo.
Note: here is another view of the correct order and placement of the component parts:
Altri manuali per CW1200
2
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali EdgeStar Lavatrice e asciugatrice
EdgeStar
EdgeStar CW1200 Manuale utente
EdgeStar
EdgeStar sw5l40d Manuale utente
EdgeStar
EdgeStar CW 2200 Manuale utente
EdgeStar
EdgeStar CWD1550W Manuale utente
EdgeStar
EdgeStar CWD1550BL-1 Manuale utente
EdgeStar
EdgeStar CWD1510W Manuale utente
EdgeStar
EdgeStar CW1210V Manuale utente
EdgeStar
EdgeStar SW5L30D Manuale utente
EdgeStar
EdgeStar CWD1510S Manuale utente
EdgeStar
EdgeStar CW1200 Manuale utente
