Edgetech 3100 Manuale utente
ii
3100 SUB-BOTTOM PROFILER 0018997_REV_A
The information, figures, and specifications in this manual are proprietary and are issued in strict
confidence on condition that they not be copied, reprinted, or disclosed to a third party, either wholly or
in part, without the prior, written consent of EdgeTech. Any reproduction of EdgeTech supplied software
or file sharing is strictly prohibited.
EdgeTech © 2017. All rights reserved.
iii
ATTENTION –READ THIS FIRST!
All personnel involved with the installation, operation, or maintenance of the equipment described in this
document should read and understand the warnings and cautions provided below.
CAUTION! This equipment contains devices that are extremely sensitive
to static electricity. Therefore, extreme care should be taken when
handling them. Normal handling precautions involve the use of anti-static
protection materials and grounding straps for personnel.
WARNING! High Voltage may be present in all parts of the system.
Therefore, use caution when the electronics are removed from their
containers for servicing.
CAUTION! Operation with improper line voltage may cause serious
damage to the equipment. Always ensure that the proper line voltage is
used.
CAUTION! Do not operate the system while the towfish in air for
extended periods. The system may be enabled to transmit while in air for
test purposes, as an audible clicking may be heard by persons with good
hearing (young ears). Such testing should be limited to 5 minutes or less.
This system transmits high power into the transducers, which can
become quite hot if operated in air for extended periods. Damage to the
transducers and internal electronics is possible.
iv
3100 SUB-BOTTOM PROFILER 0018997_REV_A
ABOUT THIS DOCUMENT
This document is intended to provide the user with the essentials for setting up a 3100 Sub-Bottom
Profiler system and performing a survey. It is not a replacement for the provided software and hardware
manuals. Please consult these documents for a complete understanding of the system.
Liability
EdgeTech assumes no liability for errors or for any damages that result from the use of this quick start
guide or the equipment it documents. EdgeTech reserves the right to upgrade features of this equipment,
and to make changes to this guide, without notice at any time.
Revision History
REVISION
DESCRIPTION OF CHANGES
DATE
APPROVAL
A
Release to Production
01/06/2017
MS
v
TABLE OF CONTENTS
ATTENTION –READ THIS FIRST! .........................................................................................................iii
ABOUT THIS DOCUMENT...................................................................................................................iv
Liability..................................................................................................................................................... iv
Revision History ....................................................................................................................................... iv
TABLE OF CONTENTS..........................................................................................................................v
1.0 SETUP....................................................................................................................................1-1
1.1 Topside Setup ............................................................................................................................1-1
1.2 Towfish Assembly ......................................................................................................................1-1
2.0 ACTIVATION ..........................................................................................................................2-1
2.1 Powering Up the Topside and DISCOVER Software...................................................................2-1
3.0 DEPLOYMENT ........................................................................................................................3-1
4.0 QUICK GUIDE CHECKLIST ........................................................................................................4-1
1-1
1.0 SETUP
1.1 Topside Setup
To setup the topside:
1. Set up your Sub-Bottom Profiler system laptop and 3100 topside unit at a secure place.
2. Connect the AC or DC power cable to a power source.
3. Connect the ETHERNET cable to the laptop and 3100 topside.
4. Connect the GPS to an appropriate serial port.
5. If using a wireless connection, enable wireless connection in the network settings and disable the
LAN connection on the laptop.
1.2 Towfish Assembly
To assemble the towfish:
1. Assemble and attach the towfish as shown in FIGURE 1-1.
Figure 1-1
1-2 1.0 SETUP
3100 SUB-BOTTOM PROFILER 0018997_REV_A
2. Apply a small amount of silicone grease to the Tow cable connector prior to connecting to towfish.
3. Attach the tow cable to the towfish main I/O connector and secure the locking sleeve.
4. Connect the tow cable safety grip and shackle it to the tow arm. Securely tighten and seize the
cable with a tie wrap or stainless steel wire.
5. Attach the potted splice to the tow arm with tie wraps to prevent damage to the connector and
splice (see FIGURE 1-2).
Figure 1-2
6. Once the towfish is assembled and the tow cable is attached to it, connect the tow cable to the
topside.
2-1
2.0 ACTIVATION
After making all connections, the system is ready to be turned on and the DISCOVER Software may be
started. See the 3100 Software Manual for operation details.
2.1 Powering Up the Topside and DISCOVER Software
1. Flip the topside Power switch on, and turn on the laptop if it is not already on.
Figure 2-1
2. Observe that the Power indicator is illuminated and that the Ping and Ready lights are active on
the topside.
3. Start the DISCOVER SUB-BOTTOM software program on the laptop if it is not already running, and
wait for the NET OFF dialog box to change to NET ON. This indicates that the topside and towfish
are connected.
POWER
switch
READY
indicator
PING
indicator
TOW CABLE
connector
DC INPUT /
ETHERNET
connector
AC
input
POWER
indicator
5A/250V
fuse
2-2 2.0 ACTIVATION
3100 SUB-BOTTOM PROFILER 0018997_REV_A
Figure 2-2
4. Press Sub-Bottom On icon (red & black) and verify that the waterfall is scrolling.
Figure 2-3
5. In the sonar control dialog select a pulse from the Library.
Figure 2-4: Towfish Control Tab
Indice
Altri manuali Edgetech Equipaggiamento marittimo
Edgetech
Edgetech Port Pop-Up Manuale utente
Edgetech
Edgetech 3300 Manuale utente
Edgetech
Edgetech 4125I Manuale utente
Edgetech
Edgetech STARMUX IV Manuale utente
Edgetech
Edgetech 2300 Manuale utente
Edgetech
Edgetech STARMUX IV Manuale utente
Edgetech
Edgetech 2050-DSS Manuale utente
Edgetech
Edgetech 701 DIGITAL LINK Manuale utente
Edgetech
Edgetech 3400 Manuale utente
Edgetech
Edgetech 6205S2 Manuale utente
Edgetech
Edgetech 3200-XS Manuale utente
Edgetech
Edgetech 3400 Manuale utente
Edgetech
Edgetech 8011M Manuale utente
Edgetech
Edgetech 3200-XS Manuale utente
Edgetech
Edgetech Model 3100P Sub-bottom Sonar System Manuale utente
Edgetech
Edgetech 8242XS Manuale utente
Edgetech
Edgetech 4380 MULTIBEACON Manuale utente
Edgetech
Edgetech 4200-FS Manuale utente
