Edimax EW-7317LDg Manuale utente

802.11g Wireless LAN

Wi-Fi Detector / USB 2.0 Adapter

Version 1.0 March, 2006

-L

Če

ký

ý: Anglického průvodce rychlou instalací naleznete

na přiloženém CD s ovladači

: Finden Sie bitte das englische QIG beiliegend in

der Treiber CD (German)

añ

ño

l: Incluido en el CD el QIG en Ingles.

nç

ça

:Veuillez trouver l’anglais QIG ci-joint dans le CD

driver

: Incluso nel CD il QIG in Inglese.

Az angol telepítési útmutató megtalálható a

mellékelt CD-n

s: De engelstalige QIG treft u aan op de

bijgesloten CD

i: Skrócona instrukcja instalacji w języku angielskim

znajduje się na załączonej płycie CD

uê

ês

s: Incluído no CD o QIG em inglês.

Ру

ус

сс

ск

ки

ий

й:

Найдите QIG на анлийском языке на

приложеном CD

Tü

ür

kç

çe

:Ürün ile beraber gelen CD içinde Türkçe Hızlı

Kurulum Kılavuzu'nu bulabilirsiniz

English.

*How to Charge the Wi-Fi Detector:

1. Remove the cap from the Wi-Fi Detector, slide the power

switch to the “ON” position and carefully insert the USB

connector into any available USB port on your computer. You

will see the recharging screen.

The battery strength indicator will be animated while the

Wi-Fi detector is being recharged.

2. When the Wi-Fi detector is finished recharging it will

automatically stop charging the battery. When it is finished

recharging the battery you will see “Charge Finish” displayed

on the LCM and the battery strength indicator will stop

blinking.

*How to use the Wi-Fi Detector:

1. Slide the power switch to the “ON” position, and a welcome

screen will greet the user.

2. After the welcome screen is displayed the Wi-Fi detector will

automatically enter scanning mode to detect Wi-Fi signals.

In scanning mode the LCM will display the total number of

both non-encrypted and encrypted Wi-Fi signals detected.

3. Once scanning mode is complete, the detector will enter its

standard display mode.

The detector automatically sorts the signals by the following

criteria: Non-encrypted AP’s according to signal strength

followed by encrypted AP’s according to signal strength.

The Icons on the LCM are displayed as follows:

1. Operating Channel: Indicates the current operating

channel of the detected Wi-Fi signal.

2. Number of AP’s Detected: the left digit indicates which

detected Wi-Fi signal is currently displayed and the right

digit indicates the total amount of Wi-Fi signals detected.

3. Encryption indicator: “WEP” for WEP encryption, “WPA”

for WPA encryption, and “WPA2” for WPA2 encryption

and “OPEN” indicates it is a non-encrypted signal.

4. “G” indicates the signal is a 802.11g wireless signal. “B”

indicates the signal is a 802.11b wireless signal.

5. Signal strength indicator with 5 bars indicating the signal

strength.

6. “In” indicates the signal is an infrastructure mode signal,

“Ad” indicates the signal is an Ad-hoc mode signal.

7. Battery indicator with 3 bars indicating battery power.

When the indicator is empty, please recharge the

detector by inserting it into a USB port.

8. SSID Indicator: Displays the SSID of the detected Wi-Fi

signal, if the SSID is too long the SSID indicator will scroll

to display the complete SSID.

4. If the user wishes to detect a signal with a dedicated

SSID, the user simply has to hold down the “scan” button

for 4 seconds to enter “lock mode”. When the detector is

in “lock mode” an icon with a capitalized “L” appears in

the upper middle corner of the display.

In “lock mode” the detector constantly refreshes the signal

strength so the user can move around to find where the

detected signal strength is the strongest.

*Windows 98SE/Me/2000/XP:

The following installation operates under Windows XP.

Procedures are similar for Windows 98SE/Me/2000/2003 Server.

Please do not install the USB adapter into your

computer before installing the software

program from the CD.

A. Install the Configuration Utility

Insert the Installation CD to your CD-ROM drive, the setup

programs will appear.

1. Click the “Utility” then execute the “Product Utility”. the setup

programs will be start

2. Execute the “setup” program then click “Next” to continue

3. If you want to install the software program in another location,

click “Browser” and select an alternative destination. Then,

click “Next” to continue

4. Click “Continue Anyway” to finish the installation.

B. Install the USB Adapter

1. Plug the USB Adapter into the USB port of your computer.

2. The “Found New Hardware Wizard” is displayed, select

“Install the software automatically (Recommended)” and click

“Next”.

3. Click “Continue Anyway” and the system will start to install

the USB adapter.

Altri manuali per EW-7317LDg

Altri manuali Edimax Adattatore

Edimax

Edimax nMAX Manuale utente

Edimax

Edimax EP-4103DL Manuale utente

Edimax

Edimax Adaptor Manuale utente

Edimax

Edimax HP-5101 Manuale utente

Edimax

Edimax EW-7618Ug Manuale utente

Edimax

Edimax EN-5200PXA Manuale utente

Edimax

Edimax EW-7618Ug Manuale utente

Edimax

Edimax HP-6002 Manuale utente

Edimax

Edimax EW?7711ULC Manuale utente

Edimax

Edimax EN-9230TX-32 Manuale utente

Edimax

Edimax EW-7317LDg Manuale utente

Edimax

Edimax EN-9120 Manuale utente

Edimax

Edimax EW-7317UHg Manuale utente

Edimax

Edimax Wireless USB Adapter 11g & 11n Manuale utente

Edimax

Edimax HP-5101 Manuale utente

Edimax

Edimax EW-7811UAC Manuale utente

Edimax

Edimax EU-4206 Manuale utente

Edimax

Edimax Edimax Wireless LAN Cardbus Adapter Manuale utente

Edimax

Edimax EU-4208 Manuale utente

Edimax

Edimax BT-8500 Manuale utente

Edimax

Edimax EW-7612UAn V2 Manuale utente

Edimax

Edimax EW-7108PCg Manuale utente

Edimax

Edimax EW-7206GAb Manuale utente

Edimax

Edimax EW-7317UHg Manuale utente

Manuali Adattatore popolari di altre marche

PCB Piezotronics

PCB Piezotronics 090B274 Manuale utente

Auvidea

Auvidea J20 Manuale del prodotto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuale utente

Akribis

Akribis ITF-21-BISS-MIT Manuale utente

Tenda

Tenda W54U Manuale utente

ROHO

ROHO AGILITY Manuale utente

PROLiNK

PROLiNK WN2001 Manuale utente

Hawking

Hawking HUF2 Manuale utente

Airlink101

Airlink101 AWLC4030 Manuale utente

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuale utente

Philips

Philips SWA4554S/10 Manuale utente

JVC

JVC TS-C9D2B Manuale di istruzioni

NETGEAR

NETGEAR A6100 Manuale utente

D-Link

D-Link DWA-121 Manuale utente

Philips

Philips SWA2037 Manuale utente

Basalte

Basalte 0610-20 Manuale utente

Yealink

Yealink EHS40 Manuale utente

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuale utente