Edimax BR-6475nD Manuale utente

BR-6475nD

Quick Installation Guide

11-2012 / v1.1

may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated

into any language or computer language, in any form or by any means, electronic,

mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written

permission from Edimax Technology Co., Ltd.

Edimax Technology Co., Ltd. makes no representations or warranties, either expressed or

implied, with respect to the contents hereof and specifically disclaims any warranties,

merchantability, or fitness for any particular purpose. Any software described in this

manual is sold or licensed as is. Should the programs prove defective following their

purchase, the buyer (and not this company, its distributor, or its dealer) assumes the

entire cost of all necessary servicing, repair, and any incidental or consequential damages

resulting from any defect in the software. Edimax Technology Co., Ltd. reserves the right

to revise this publication and to make changes from time to time in the contents hereof

without the obligation to notify any person of such revision or changes.

The product you have purchased and the setup screen may appear slightly different from

those shown in this QIG. For more information about this product, please refer to the

user manual on the CD-ROM. The software and specifications are subject to change

without notice. Please visit our website www.edimax.com for updates. All brand and

product names mentioned in this manual are trademarks and/or registered trademarks

of their respective holders.

Notice According to GNU General Public License Version 2

This product includes software that is subject to the GNU General Public License version

2. The program is free software and distributed without any warranty of the author. We

offer, valid for at least three years, to give you, for a charge no more than the costs of

physically performing source distribution, a complete machine-readable copy of the

corresponding source code.

The GNU GPL and GNU LGPL software codes used in Edimax products are distributed

without any warranty and are subject to the copyrights of their respective authors. The

firmware files for this product can be found under the “Download” page at the Edimax

website (www.edimax.com).

Package Contents

Installation

1. Screw in the two included 3dBi

antennas to the back of the router,

and use an Ethernet cable to connect

the router’s WAN port to your

modem’s LAN port.

2. Use an Ethernet cable to

connect any LAN port on the

router to the Ethernet port on

your computer.

3.Plug the included power adapter

into the router’s 12v Power jack

and the other end into an

electrical socket.

BR-6475nD

Holding base

QIG

Setup Wizard CD

Power Adapter

Ethernet Cable

3dBi Antenna x2

5.Insert the setup wizard CD into a CD-ROM

drive on your computer. When the wizard

begins, select your language.

4.Ensure that the Power LED, WAN LED and corresponding LAN LED on the

router are lit. If not, the router is not properly connected.

Power

LAN 1 - 4

WAN

Note: If the setup wizard doesn’t run

automatically, please browse your

CD drive and double click the

“Ezmax.exe” file to start the wizard.

6.The setup wizard will guide you through

the installation process. Click “Next”to

continue.

7.Click “Next”to continue.

8.Check that all cables are properly

connected and check the box labeled

“YES, I have connected the cables

correctly”before clicking “Next”.

9.Select your product type –in this case

“BR-6475nD”.

10.Enter the default password 1234 in

the field labeled “Current Password”

and then if you wish to change this

password, enter a new password in the

fields marked “New Password”and

“Confirm New Password”. Click

“Apply”and then “Ok”.

Note: This is the password to login to your router to configure the settings –not

the password to connect to the router’s Wi-Fi network(s). If you change this

password, please make a note of the new password.

If you forget, you can reset the password back to its default value of 1234 by

resetting the router back to factory defaults, see Troubleshooting.

11.Select your Internet connection type

and click “Next”. If you are a dynamic IP

user, then select “Cable Modem”. For

most users, “Cable Modem”is the

correct setting. If you are unsure, please

contact your Internet Service Provider

(ISP).

12. If you received a host name and MAC

address from your ISP, enter them here

and click “Apply”. If you are sure the

MAC address is the same as your

computer, you can click “Clone”to

clone your computer’s MAC address

and then click “Apply”to continue.

13.Please wait while the router connects

to the Internet.

14.When the router is connected your default web browser will open. Close the

browser, and you will see the following screen. Please do not select Exit. You still

need to configure the ESSID and Wireless Security –please select “ESSID”from

the top menu next.

15.Please enter separate ESSIDs for the

router’s 2.4GHz mode and 5GHz mode.

An ESSID is a name to identify the

wireless router. Later, when the router

is fully operational, you will need to

select this ESSID from your available

Wi-Fi networks to connect to the

wireless router. Click “Apply”.

16.Please wait while the router is setting

its new ESSID. When it is finished, click

“Complete!”and then click “Next”to

continue.

19. You can now open a web browser to

access the internet and check your

router’s connection. Then, to connect to

the BR-6475nD’s wireless networks, you

need to unplug the Ethernet cable

connecting the router and your

computer.

17.To configure your router’s wireless

security, check the box labeled “Enable

WPA Pre-Share Key”. Then enter a

password for each of the router’s

2.4GHz and 5GHz networks. This

password will be required when you

connect to the router wirelessly. Click

“Apply”to save the settings.

18.Please wait for the router to save the

new passwords. When it is finished,

click “Complete!”and then click “EXIT”

in the top right corner to exit the setup

wizard.

Mac

View available Wi-Fi networks by clicking

the icon along the top right of your

screen.

Windows

Click the network icon ( , or ) in

the system tray and select “Connect to a

network”.

21. After correctly entering your

password, you will be successfully

connected to your Wi-Fi network.

20. Windows

Search for the ESSID you named your

Wi-Fi network and click it and then click

“Connect”. If you set a password for your

network, you will then be prompted to

enter it.

Mac

Click on the ESSID of your network.

If you set a password for your

network, you will then be prompted

to enter it.

Alternatively, if your wireless device supports WPS, you can use the WPS

button (see next section).

If your wireless device supports WPS (Wi-Fi Protected Setup) then you can use this

method to connect to the BR-6475nD’s Wi-Fi networks.

For Mac/Linux users –or those who can’t run the CD, you can setup the router

manually using the web based configuration interface.

WPS Setup

Web Based Configuration Interface

1.Press the WPS/Reset button on the router

once to activate WPS for 2.4GHz Wi-Fi, or press

twice (within 5 seconds) to activate WPS for

5GHz Wi-Fi.

2.Within two minutes, press and hold the WPS

button on the wireless device/client to activate

its WPS.

Note: Please check the instructions for your

wireless device for how long you need to hold

down its WPS button to activate WPS.

3.The devices will establish a connection. Repeat

for additional wireless devices.

1.Enter http://192.168.2.1 into the URL of a

web browser and enter the username

admin and password 1234.

2.Select “General Setup”from the top

menu and “WAN”from the submenu.

Choose your connection type –for

most users it is “Dynamic IP”. If you are

unsure, please contact your Internet

Service Provider (ISP). Click “Apply”and

then “CONTINUE”.

Altri manuali per BR-6475nD

Indice

Altri manuali Edimax Router di rete

Edimax

Edimax AR-7211A V2 Manuale utente

Edimax

Edimax EW-7822UMX Manuale utente

Edimax

Edimax BR-6104K Manuale utente

Edimax

Edimax HP-8501 Manuale utente

Edimax

Edimax AR-7167WnA Guida di riferimento

Edimax

Edimax 3G-6200nL V2 Guida di riferimento

Edimax

Edimax BR-6428nS V5 Manuale utente

Edimax

Edimax Triple A Guida all'installazione

Edimax

Edimax AR-7186WnA Manuale utente

Edimax

Edimax GS-5208P Manuale utente

Edimax

Edimax ES-3305P Guida di riferimento

Edimax

Edimax BR-6208ACD Manuale utente

Edimax

Edimax ES-5804PH Manuale utente

Edimax

Edimax EW-7416APn v2 Manuale utente

Edimax

Edimax BR-6524n Scheda informativa del prodotto

Edimax

Edimax AR-7167WnA Manuale utente

Edimax

Edimax ES-3105P Manuale utente

Edimax

Edimax BR-6258nL Manuale utente

Edimax

Edimax BR-6258n Nano router Manuale utente

Edimax

Edimax EW-7415PDn Manuale utente

Edimax

Edimax AR-7064+ Manuale utente

Edimax

Edimax ES-1008PH Guida di riferimento

Edimax

Edimax GS-5008PL Manuale utente

Edimax

Edimax BR-6641 Manuale di istruzioni

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza