Ediseja 21 PEU 016 Manuale utente
PEU 016 - USB to 16x Serial Port Extender Unit
Content
1 PREFACE.......................................................................................................3
2 PEU 016 SYSTEM..........................................................................................5
2.1 DESCRIPTION..................................................................................................................... 5
2.2 TYPICAL APPLICATION..................................................................................................... 5
2.3 APPEARANCE..................................................................................................................... 5
3 SCHEMATIC...................................................................................................6
4 INSTALLATION..............................................................................................7
4.1 DE ICE OPENING AND 19" RACK HOLDING BRACKET POSITION CHANGE...............7
4.2 FIBER OPTIC LOGIC SETTINGS........................................................................................8
4.3 USB DRI ERS INSTALLATION..........................................................................................8
4.3.1 V RTUAL COM PORT DR VERS.......................................................................................8
4.3.1.1 V RTUAL COM PORT DR VERS EXECUTABLE SETUP FOR W NDOWS..................8
4.3.2 DLL DR VERS (for advanced users)..................................................................................9
4.4 SERIAL PORT APPLICATION START................................................................................9
4.5 MOUNTING........................................................................................................................ 10
5 COMMISSIONING & MAINTENACE..........................................................11
5.1 COMMISSIONING.............................................................................................................. 11
5.2 MAINTENANCE................................................................................................................. 11
6 TECHNICAL DATA......................................................................................12
7 DIMENSIONS...............................................................................................14
8 ORDERING...................................................................................................16
Page: Device: Document: Code: Date:
2 PEU 016 User manual PEUMU016 17.08.2020
PEU 016 - USB to 16x Serial Port Extender Unit
1 PREFACE
Liability statement
We have checked the contents of this manual to ensure that the descriptions of both hardware and
software are as accurate as possible. However, deviations may occur so that no liability can be accepted
for any errors or omissions contained in the information given.
The contents of this manual will be checked in periodical intervals, corrections will be made in the
following editions.
We reserve the right to make technical improvements without notice.
Contact
f you have any questions or comments related to this product please contact us on:
Ediseja 21 d.o.o.
Stegne 21C
1000 Ljubljana
Slovenia – EU
Tel: 00 386 51 643 411
Email: grega.flander@ediseja21.com
www.ediseja21.com
Copyright
Copyright © Ediseja 21, 2020. All rights reserved.
Explanation of the symbols
Read the instructions!
Device was tested with 2 kV AC voltage to check the device insulation.
Device ground terminal.
Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC; the affixed
product label indicates that you must not discard this electrical/electronic product in
domestic household waste.
Warnings
n this paper the following terms are used:
Danger
indicates that death, severe personal injury or substantial property damage will result if proper precautions
are not taken.
Warning
indicates that death, severe personal injury or substantial property damage can result if proper
precautions are not taken.
Device: Document: Code: Date: Page:
PEU 016 User manual PEUMU016 17.08.2020 3
PEU 016 - USB to 16x Serial Port Extender Unit
Caution
indicates that minor personal injury or property damage can result if proper precautions are not taken.
This particularly applies to damage on or in the device itself.
General information
These paper contain the information that is necessary for the proper and safe operation of the described
devices. This paper is intended for technically qualified personnel.
Warning!
Hazardous voltage is present inside the device during operation. Disregarding of safety
rules can result in severe personal injury or property damage.
Only qualified personnel may work with described devices after being familiar with warnings and
safety notices in this paper and other safety regulations.
Warning!
Device must operate completely assembled! Device must be used as described. No
modifications of the device should be made.
Warning!
Do not open device while it is energized! Hazardous voltage is present inside the
device. Disconnect all connectors before opening!
Warning!
If device is damaged disconnect it from power supply! Send it to the manufacturer for
inspection.
Warning!
Connect to earth before attaching power supply!
Page: Device: Document: Code: Date:
4 PEU 016 User manual PEUMU016 17.08.2020
PEU 016 - USB to 16x Serial Port Extender Unit
2 PEU 016 SYSTEM
2.1 DESCRIPTION
Port extender unit (PEU 016) is system for extending computer serial ports. t adds 16 serial ports to the
operating system from single USB port. t galvanicaly separates RS232 to prevents ground loops and
increases computer's electromagnetic immunity (EM ). Besides RS232 it additionaly provides RS485 and
multimode fiber optic ports for connection to protection relays, voltage regulators, ect. Number of each
port is user selectable.
PEU system is assembled from PEU 016 device and appropriate drivers for multiple operating systems.
PEU 016 housing is made from inox and intended for 19" rack mounting or surface mounting.
This device is intended for use in cubicles and cabinets in all kinds of power production, transmission and
distribution stations. t requires no maintenace. All normaly used connectors, switches and light indicators
are accessed at the front side of the device. Light indicators indicate communication activity of each port.
2.2 TYPICAL APPLICATION
2.3 APPEARANCE
Device: Document: Code: Date: Page:
PEU 016 User manual PEUMU016 17.08.2020 5
Picture 2: Front view
Picture 1: Typical application
PEU 016 - USB to 16x Serial Port Extender Unit
4 INSTALLATION
4.1 DE ICE OPENING AND 19" RACK HOLDING BRACKET
POSITION CHANGE
Warning!
Hazardous voltage is present inside the device during operation. Disregarding of safety
rules can result in severe personal injury or property damage.
Before following steps are made, unplug ALL cables from the device especially power supply!
Device 19" rack or surface mounting holding bracket position change:
follow the steps
- 3 (unscrew 2 upper screws)
- 6 (unscrew 2 lower screws)
- 7 (adjust & turn 19“ rack holding bracket according to your needs)
- reverse step 3 & 6
- then follow the steps 2, 4, 5, reverse step 2 & 4.
- Step 8: attach D N35 additional holder if needed (not included).
Removing cards for fiber optic logic change:
follow the steps
- 1 (unscrew 1 upper screws)
- 2 (unscrew 2 upper screws on the left side)
- 3 (unscrew 2 upper screws on the right side)
- remove top of the device
for ports 1-8:
- unscrew 4 screws inside the device that holds the cards
- take a picture of flat cable connetors is possible
- move both boards simultaneously
- disconnect flat cables
- remove both boards simultaneously.
for ports 9-16:
- unscrew 4 distance bolts that holds the cards
- remove both boards simultaneously.
Device: Document: Code: Date: Page:
PEU 016 User manual PEUMU016 17.08.2020 7
Picture 4: Device opening & holding bracket po ition change tep
PEU 016 - USB to 16x Serial Port Extender Unit
4.2 FIBER OPTIC LOGIC SETTINGS
Fiber optic port can operate with the positve logic (light OFF in idle state) or with the negative logic (light
ON in idle state). User can set the logic with jumper settings on each fiber optic port inside the device. To
do so, unplug ALL cables from the device. And see previous chapter for opening the device.
After board(s) are removed from the device, set the jumpers according to the requirements.
After jumper setting is completed, assemble the device in reverse order.
4.3 USB DRI ERS INSTALLATION
4.3.1 IRTUAL COM PORT DRI ERS
Virtual COM port (VCP) drivers cause the USB device to appear as an additional COM port available to
the PC. Application software can access the USB device in the same way as it would access a standard
COM port.
USB drivers are available for many operating systems:
Windows 7, Windows Server 2008 R2 and Windows 8, 8.1, Windows server 2012 R2,
Windows Server 2016 and Windows 10
Linux supported in Ubuntu 11.10, kernel 3.0.0-19
Mac OS X 10.3 and above
Windows CE 4.2-5.2
Windows CE 6.0/7.0
Windows CE 2013
Drivers & more information can be obtained at:
https://www.ftdichip.com/Drivers/VCP.htm
4.3.1.1 IRTUAL COM PORT DRI ERS EXECUTABLE SETUP FOR WINDOWS
For setup executable file click on link in red frame on
https://www.ftdichip.com/Drivers/VCP.htm
web site:
Page: Device: Document: Code: Date:
8 PEU 016 User manual PEUMU016 17.08.2020
Picture 5: Fiber optic etting : left - po itive logic (light OFF in idle tate)
right - negative logic (light ON in idle tate)
PEU 016 - USB to 16x Serial Port Extender Unit
Download the file, unzip it and run that exe file. (Currently named CDM21228_Setup.exe).
Wait until installation is complete, reboot PC if it is instructed so.
Connect PEU 016 to power supply.
Connect PEU 016 USB cable to the computer.
Wait operating system to find and install all that is needed.
After installation is completed, there should be new serial ports installed into the computer's system.
Number of new ports depends on PEU 016 device type.
f not, reboot the computer. f that does not help, deinstall serial ports, unplug USB cable reboot the
computer and repeat previously described procedure.
4.3.2 DLL DRI ERS (for advanced users)
D2XX drivers allow direct access to the USB device through a DLL. Application software can access the
USB device through a series of DLL function calls. Drivers & more information can be obtained at:
https://www.ftdichip.com/Drivers/D2XX.htm
4.4 SERIAL PORT APPLICATION START
Note!
Application which connects to the serial ports must be started after all ports are recognised by the
operating system. Ports must be recognised by the operating system every time that PC or PEU
device is powered and/or USB cable is connected to the PC. If this requirement is not followed,
some ports may not work!
Device: Document: Code: Date: Page:
PEU 016 User manual PEUMU016 17.08.2020 9
PEU 016 - USB to 16x Serial Port Extender Unit
4.5 MOUNTING
Warning!
Hazardous voltage is present inside the device during operation. Disregarding of safety
rules can result in severe personal injury or property damage.
Only qualified personnel may work with described devices after being familiar with warnings and
safety notices in this paper and other safety regulations.
Following instruction must be taken into consideration:
The device must be accessible to qualified personnel only.
The device is permitted to operate in enclosed housing or cabinet only.
The device location must be vibration-free.
The admisible operating temperature must be observed.
Check the device for damage at unpacking. f device is damaged it must not be installed
but it should be send to the manufacturer for repair.
The device should be screwed with 4 M6 screws to the 19" rack or to the mounting
surface.
Attach ground wire before attaching power supply. Device must be grounded during
operation!
Connect power supply to appropriate voltage.
Single core or stranded wire 0,5 – 2,5 mm2 must be used for power supply connection. f
stranded wire is used, ferrules must be used to prevent fraying. Recommended stripping
lenght is 5 mm.
Protective earthing wire must be terminated with tinned copper ear terminal.
The prescribed bending radius of the optical fibre cables must be observed.
Page: Device: Document: Code: Date:
10 PEU 016 User manual PEUMU016 17.08.2020
Picture 6: Mounting
Altri manuali per PEU 016
1
Indice
Altri manuali Ediseja 21 Estensione
