Edision HD Modulator 3in1 Quad Manuale utente
User’s Guide
Quad
Digital Quad HD Modulator to 2 x DVB-T, DVB-C or ISDB-T MPEG4
2
CONTENTS
►INTRODUCTION .......................................... 3
►FEATURES ................................................... 4
►TECHNICAL SPECIFICATIONS................... 4
►RF SPECIFICATIONS .................................. 5
►CONNECTIΟΝ & OPERATION .................... 6
►PACKAGE INCLUDES.................................. 7
►FRONT PANEL..............................................8
►MAIN MENU ..........................................9 - 10
►
CONFIGURATION EXTRACTION (CFG)
11 - 13
►CONFIGURATION IMPORT (CFG) ............ 13
►FAST PRE-CONFIG FUNCTION /
50 ID’S SELECTABLE................................. 14
►TROUBLESHOOTING................................ 15
►INSTALLATION EXAMPLE ........................ 16
The CE certificate of the product is available on our webpage, by visiting this link:
https://www.edision.gr/en/support
3
►INTRODUCTION
Digital quad-channel FULL HIGH DEFINITION modulator. HD signal input from up to four (4) HD sources
(Terrestrial & Satellite TV receivers, Cameras, DVD’s, DVR’s, Digital Signage etc) can be converted to two
(2) channels FULL HIGH DEFINITION 1080p, Digital Terrestrial DVB-T, ISDB-T or Cable DVB-C MPEG4
signal output, in VHF/UHF band. Produces excellent quality signal output, combined with reliable, easy and
fast conguration with the Pre- Cong Function and stable operation in any installation scheme.
HD Modulator 3in1 Quad
4
►TECHNICAL SPECIFICATIONS
Processor
Memory
HD Input
USB Type
Power Consumption
Video Encoder
Aspect Ratio
Resolution
Audio encoder
4 x 200MHZ 32Bits RISC
4 x DDRII 16bit 512Mbits (Embedded) & NOR Flash 32Mbit
4 x HD v1.4a
4 x USB 2.0 HOST, Supports Fat32
20W maximum, 100-240V AC to DC power supply unit 12V 3A
MPEG1, MPEG2 MP@HL, MPEG4 SP@L3 to
ASP@L5, MPEG4 AVC [email protected], [email protected]
16:9 wide screen, 4:3 letter box, 4:3 pan scan
Up to 1080p@30FPS
MPEGI L1/2, MPEGII LII, AAC LC, HE-AAC v1/v2 (2-CH)
►FEATURES
• INPUT signal: 4 Χ HD
• OUTPUT signal: 2 X Digital Terrestrial DVB-T,
ISDB-T or Cable DVB-C MPEG4
• High Video Resolution up to 1080p
• Frequency Range
DVB-T: VHF (CH.5-12) & UHF (CH.21-69)
ISDB-T: VHF (CH.7-13) & UHF (CH.14-69)
DVB-C: 47-862 MHz
• MER more than 35dB
• Adjustable RF Output Level / Default 90dbμV
• Fast Pre-Cong Function / 50 ID’s Selectable
• Backup Cong File by USB
• Software Upgrade by Service Port
• Ports: 4 X HD IN, RF OUT, 4 X USB, DC 12V,
SERVICE PORT, GROUND
• Four (4) X 4-digit LED Displays
• Low Power Consumption
5
►RF SPECIFICATIONS
Frequency Range
Output Frequency Range
Impendance
FEC
Guard Interval
Constellation
RF Output level
Bandwidth
FFT
Reed Solomon
Symbol Rate
MER
DVB-T, ISDB-T or DVB-C / VHF & UHF band
DVB-T: VHF (CH.5-12) & UHF (CH.21-69)
Option 1:
Change preset Channels from the screen
Option 2:
Change preset Channels with USB Cong
ISDB-T: VHF (CH.7-13) & UHF (CH.14-69)
Option 1:
Change preset Channels from the screen
Option 2:
Change preset Channels with USB Cong
DVB-C: 47-862 MHz
Option 1: Change the frequency in steps of 10KHz from the screen
Option 2: Change frequency in steps of 1KHz with USB Cong
50Ω
1/2, 2/3, 3/4, 5/6, 7/8
1/4, 1/8, 1/16, 1/32
QPSK, 16QAM, 64QAM
2 x 90dBμV, adjustable attenuation 0 ... -14dB, adjustable gain 0 ... +6dB
DVB-T: 7MHZ, 8MHZ ISDB-T: 6MHZ DVB-C: 7MHZ, 8MHZ
2K, 4Κ, 8K
202, 188, T=8
6MHZ = Up to 2x8000 MBPS, 7MHZ = Up to 2x9000 MBPS, 8MHZ = Up to 2x10000 MBPS
>35dB, at maximum RF level output.
6
►CONNECTIΟΝ & OPERATION
1. Connect up to 4 HDMI Cables from up to 4 HD source devices to the respective HD Modulator HD inputs
(
HD IN 1, 2, 3, 4)
.
2. Connect an RF Cable from RF OUT to the RF Network.
3. Connect the power supply to the HD Modulator.
4. Select conguration signals from the MENU TV STANDARD (STAN) between DVB-T, DVB-C or ISDB-T
5. Select the desired RF Channel outputs from the modulator display 1 and 3.
6.
If there are more than one Quad-HD Modulator units in the same installation, select ID for each output channel.
The ID selection is made for each quad modulator unit in its own 4 displays, separately in each display.
7. Proceed with channel scanning on your TV/STB
7
KEY LOCK
Press the key lock and when the green led lights up the
keypad is locked. Press once again to unlock.
HD SIGNAL
Connect the HDMI cable to HD ΙΝ and when the green led lights up, the signal is active.
MENU
/OK
LOCK
►PACKAGE INCLUDES
1. HD Modulator 3in1 Quad
2. Power Adapter
3. Mounting screws
4. User Manual
MENU
/OK
LOCK
4x
DVB-T or ISDB-T Mode DVB-C Mode
8
►HD MODULATOR 3in1 QUAD FRONT PANEL
9
►MAIN MENU
Press Menu/OK to enter the MENU. Navigate through the MENU by using the buttons
“Left” / “Right” in each modulator display separately (MOD1, MOD2, MOD3, MOD4)
MOD1 & MOD2 in pair, produce one COFDM DVB-T, ISDB-T or QAM DVB-C MUX which
includes 2 TV channels. e.g. TV-1 & TV-2
MOD3 & MOD4 in pair, produce another COFDM DVB-T, ISDB-T or QAM DVB-C MUX
which includes 2 TV channels. e.g. TV-3 & TV-4
IMPORTANT:
1. The Menu selections for: CHANNEL, FREQUENCY, QAM, RF LEVEL, FACTORY
DEFAULTS, TV STANDARD are made only from Modulator Display MOD1 &
MOD3 and automatically adjust their pair units Modulator Display MOD2 & MOD4,
respectively.
2. Each HD source input is addressed to its HD Modulator.
HD IN 1 = mod 1 (conguration Display)
HD IN 2 = mod 2 (conguration Display)
HD IN 3 = mod 3 (conguration Display)
HD IN 4 = mod 4 (conguration Display)
3.
Each HD Modulator has its own USB port, for CFG (Cong File) function.
USB 1 = mod 1 (conguration Display)
USB 2 = mod 2 (conguration Display)
USB 3 = mod 3 (conguration Display)
USB 4 = mod 4 (conguration Display)
10
CH: Shows the selected RF output
chan nel in the DVB-T or ISDB-T
terrestrial sig nal modulation
selection. Use the “Up”, “Down”
keys to change the selection
FR:Shows the selected RF
output fre quency on the DVB-C
modulation cable signal. With the
«Up», «Down» keys you change
the selection.
QAM:
Shows the QAM in the
DVB-C modulation. Use the
“Up”, “Down” keys to change
the 16QAM, 32QAM, 64QAM,
128QAM or 256QAM selection.
ID: Shows the current ID. Use
the keys Up & Down to set the
desired ID.
RF: Shows the RF output level.
Use the keys Up & Down to
adjust to the desired RF level.
LCN: Shows the current LCN type.
Use the keys Up & Down to set
the desired LCN type.
FACT: Factory defaults. Press
key UP to restore factory defaults.
CFG: Conguration le extraction.
Press key UP to extract the
current conguration to the USB
storage device.
SOFT: Shows the SW version.
Use the key
Up & Down
to
display the current SW version.
STAN: Shows the TV STANDARD
mod ulation signals. Use the
“Up”, “Down” keys to change
the DVB-T, DVB-C, or ISDB-T
selection.
To save the selected conguration press once the MENU/OK key and conrm with YES or NO
by pressing the LEFT and RIGHT keys and press MENU/OK key once again. The conguration
is being saved, please DO NOT power off the unit! This procedure must be made separately, in
each one of the 4 MODULATOR displays (MOD1, MOD2, MOD3, MOD4).
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Edision Modulatore
