Company Prole
Edwards Manufacturing Company manufactures a full line
of high-quality, low-maintenance hydraulic ironworking
machines, associated tooling, and accessories that are used
in the steel fabrication industry. With proper operation, care,
and maintenance, your Edwards Ironworker or Hydraulic Ac-
cessory Tool will provide years of safe, trouble-free service.
Please take time to study this Operator’s Manual carefully
to fully understand this machine and Hydraulic Accessory
Tool safety procedures, set-up, operation, care, maintenance,
troubleshooting, and warranty coverage prior to putting the
machine into production. Any questions not answered within
this manual can be directed to your local Edwards Ironwork-
er dealer or factory representative.
Contact the Factory:
Edwards Manufacturing Company
1107 Sykes Street
Albert Lea, MN 56007
Phone:507.373.8206
Fax: 507.373.9433
www.edwardsironworkers.com
General Questions:
Service Questions:
Warranty
Edwards Manufacturing Company will, within one (1)
year of date of original purchase (proof of purchase re-
quired), replace F.O.B. the factory, any goods, excluding
punches, dies and shear blades, which are defective
in materials or workmanship provided that the buyer
return the defective goods, freight pre-paid, to the
seller, which shall be the buyer’s sole and exclusive
remedy for the defective goods. Hydraulic components
are subject to their manufacturer’s warranty.
Edwards Manufacturing Company will, within thirty (30)
days of date of original purchase (proof of purchase
required), replace F.O.B. the factory, any punches, dies
and/or shear blades, which are defective in materials or
workmanship.
This warranty does not apply to machines and/or com-
ponentswhichhavebeenaltered,changed,ormodied
in any way, or subjected to abusive and abnormal use,
inadequate maintenance and lubrication, or subjected
to use beyond seller recommended capacities and
specications.EdwardsManufacturingCompanyshall
not be liable for labor costs expended on such goods
or consequential damages. Edwards Manufacturing
Company shall not be liable to the purchaser or any
other person for loss, down-time, or damage directly or
indirectly arising from the use of the goods or from any
othercause.Noofcer,employee,oragentofEdwards
Manufacturing Company is authorized to make any oral
representationsorwarrantyoftnessortowaiveany
of the foregoing terms and none shall be binding on
Edwards Manufacturing Company.
Machine Identication
Your Edwards Model HPST2375 or HAT2375 Rotary Draw
Pipe Bender is serialized for quality control, production trace-
ability, and warranty enforcement. When ordering parts or
lingawarrantyclaim,pleaserefertothealuminumidenti-
cation tag with engraved serial number, electrical, and power
specications.
Model Number: ______________________
Serial Number: ______________________
Date Purchased: ______________________
Where Purchased: ______________________
Introduction
1| Introduction
