Eedomus TSE03-JOEL Manuale utente

IER

I: Inclusion

: Exclusion

: Reset

Rear View Inside View

Side View

Front View

Side View

Bottom View FIGURE 2

TSE03-JOEL

TAC06-JOEL DOOR BELL & PUSH BUTTON

General Introduction

The Wireless Door Bell & Push Button are a pair of Z-WaveTM enabled devices

displaying the Z-WaveTM logo, operating at 868.42 MHz. Taking the role of a

transmitter and a small Z-Wave controller, the Push Button sends signals of bell

triggering to Door Bell (receiver) wirelessly after Button is pressed. The Push Button

is compatible with other Z-Wave enabled devices.

The front buttons on Door Bell and Push Button provide not only the function of

pressing but also the function of LED indication. Preset songs (5 by default) of Door

Bell are available for sound selection, but it is also customizable as you can play own

music by replacing it with your own WAV file.

The Door Bell is powered by 3 x AA 1.5V alkaline batteries and the Push Button is

unacceptable level, the LED on Bell will flash once every 30 seconds and flash while a

song is playing, whereas the LED on Push Button will flash when Button is pressed.

When this occurs, please replace the batteries as soon as possible.

Product Overview

Push Button

1LED Indicator/Button 3○

I○

RKey

2Holes for Wall Mounting 4○

A○

EKey

Door Bell

1Horn 2LED Indicator/Music Selector 3DC Jack

4USB Port 5Keyhole Slot 6○

I○

E○

RKey

Z-WaveTM Network

The kit utilizes Z-Wave technology where Push Button is the controller and Bell is

Z-Wave enabled slave device in the system. Please refer to the table below for

carrying out inclusion, exclusion, reset or association.

Function Description LED Indication

No node ID The Z-Wave Controller (Push Button) does not

allocate a node ID to the Door Bell. Door Bell:

2-second on, 2-second off.

To include Push Button as a Primary Controller

1. To have Push Button entered inclusion

mode, press ○

I○

RKey 3 times (within 1.5

secs).

Push Button:

0.5-second on, 0.5-second off.

2. Press ○

I○

E○

RKey of Door Bell 3 times

(within 1.5 secs).

Door Bell:

0.3-second on after ○

I○

E○

Ris

pressed.

To include Push Button as a Secondary Controller

1. To have Controller entered inclusion mode.

2. Press and hold ○

I○

RKey of Push Button for

10 secs. Push Button:

0.1-second on, 0.8-second off.

Success Push Button:

Red LED of Push Button is on

for 1 sec.

Inclusion

Failure Push Button:

Red LED of Push Button

flashes 3 times rapidly.

I A

Front View

Rear View

Inside View

FIGURE 1

IER

I: Inclusion

: Exclusion

: Reset

Door Bell

(inside view)

○

I= Inclusion

○

E= Exclusion

○

R= Reset

I A

○

I= Inclusion

○

R= Reset

○

E= Exclusion

○

A= Association

Quick Guide

The kit utilizes Z-Wavetechnology. Please get familiar with the terms below before

starting the operations.

Function Abbrev. Description

Inclusion ○

IAdd a Z-Wave enabled device (e.g. Push Button) to Z-Wave

network. To control the Door Bell by using the Push Button, you

must add both of them to the network by executing Inclusion.

Exclusion ○

EDelete a Z-Wave enabled device (e.g. Door Bell) from the network.

Association ○

AAfter inclusion, you have to define the relationship between devices.

Trough association, device can be assigned as master/slave, and

specify which slave is going to be controlled by which master.

Reset ○

RClear all the data.

Note: In Push Button, each button is designed for 2 functions, e.g. ○

I○

EKey is for

inclusion and reset & ○

A○

EKey is for association and exclusion. As for Door Bell,

one button (○

I○

E○

RKey) covers all functions.

○

I= Inclusion

To include Push Button as a Primary Controller…

Push Button:

Press ○

I○

RKey 3 times (within 1.5 secs), LED flashes on & off alternately.

Door Bell:

Press ○

I○

E○

RKey 3 times (within 1.5 secs).

To include Push Button as a Secondary Controller…

Put Controller (primary controller) into Inclusion mode.

Push Button (secondary):

Press and hold ○

I○

RKey for 10 secs, LED flashes on & off alternately.

Success: Red LED of Push Button is on for 1 sec.

Failure: Red LED of Push Button flashes 3 times rapidly.

○

E =Exclusion

Push Button:

Press ○

A○

EKey 3 times (within 1.5 secs), and within 1 sec, press ○

A○

EKey

again for 5 secs until LED is off; LED flashes on & off alternately for 30 secs.

Door Bell:

Press ○

I○

E○

R3 times (within 1.5 secs).

Success: Red LED of Push Button is on for 1 sec.

Failure: Red LED of Push Button flashes 3 times rapidly.

○

A =Association

Push Button is compatible with other Z-Wave enabled devices. Please ensure

they have completed inclusion before association.

Press ○

A○

EKey 3 times (within 1.5 secs), LED flashes on & off alternately for

30 secs. Put Z-Wave enabled device (slave) into association mode first, and

then put another Z-Wave enabled device (master) into association mode

afterwards.

Success: Red LED of Push Button is on for 1 sec.

Failure: Red LED of Push Button flashes 3 times rapidly.

○

R =Reset

Push Button:

Press ○

I○

RKey 3 times (within 1.5 secs), and within 1 sec, press ○

I○

RKey

again for 5 secs until LED is off; LED flashes on & off alternately for 30 secs. All

device data is cleared.

Door Bell:

Press ○

I○

E○

RKey 3 times (within 1.5 secs), and within 1 sec, press ○

I○

E○

Key again for 5 secs until LED is off. The data got from Push Button is cleared.

IMPORTANT NOTE:

If only one Door Bell is to be deleted from the Push Button, please execute Exclusion.

Try not to reset Door Bell and Push Button unless you wish to clear all the data. Make

sure to reset BOTH Door Bell and Push Button, otherwise a time delay (the Bell takes

awhile to sound after you pressed the Push Button) might occur if you do the inclusion

again. After reset, the connection between Push Button and Door Bell is disconnected.

The Door Bell will not chime if you pr

ess the Push Button.

Function Description LED Indication

1. To have Push Button entered

exclusion mode, press ○

A○

EKey

3times (within 1.5 secs).

2. Within 1 sec, press ○

A○

EKey

again for 5 secs until LED is off.

Push Button:

0.1-second on, 0.8-second off.

3. Press ○

I○

E○

RKey of Door Bell 3

times (within 1.5 secs). Door Bell:

0.3-second on after ○

I○

E○

Ris

pressed.

Success

(node ID has been excluded) Push Button:

Red LED of Push Button is on

for 1 sec.

Exclusion

Failure/Time Out Push Button:

Red LED of Push Button

flashes 3 times rapidly.

Push Button:

1. Press ○

I○

R3 times (within 1.5

secs).

2. Within 1 sec, press ○

I○

RKey

again for 5 secs until LED is off.

3. All device data is cleared.

Push Button:

0.5-second on, 0.5-second off.

Door Bell:

1. Press ○

I○

E○

R3 times (within 1.5

secs).

Door Bell:

0.3-second on after ○

I○

E○

Ris

pressed.

2. Within 1 sec, press ○

I○

E○

RKey

again for 5 secs until LED is off.

3. The data got from Push Button is

cleared.

Door Bell:

LED stays on until Reset is

executed.

IDs are excluded. Push Button:

Red LED of Push Button is on

for 1 sec.

Reset

After you’ve reset both Door Bell and Push Button, the connection

between Push Button and Door Bell is disconnected. The Door Bell will

not chime if you press the Push Button.

Push Button is compatible with other Z-Wave enabled devices. Please

ensure they have completed inclusion before association.

Press ○

A○

E3 times (within 1.5 sec).

Push Button:

0.5-second on, 0.5-second off.

Put Z-Wave enabled device (slave) into association mode first, and then

put another Z-Wave enabled device (master) into association mode

afterwards.

Success Push Button:

Red LED of Push Button is on

for 1 sec.

Association

(Push Button only)

Failure/Time Out Push Button:

Red LED of Push Button

flashes 3 times rapidly.

Including a node ID allocated by Z-Wave Controller (Push Button) means inclusion.

Excluding a node ID allocated by Z-Wave Controller means exclusion.

Please also note:

Push Button

1. Z-Work network supports multiple controllers so you can use additional Push

Buttons throughout the home, however, there can only be one controller acts as

primary with the rest of controllers considered as secondary. Primary controller is

the main controller which can be used to set up and control your Z-Wave network;

it must be used to include/exclude devices. Secondary controllers are supportive

controllers which are same brand and model as Primary Controller, except they

cannot include/exclude devices.

2. If a secondary controller is to be added to the network, please ensure to have

primary controller (e.g. Push Button) and device (e.g. Door Bell) complete

inclusion first, and then include secondary controller (e.g. another Push Button) to

the network afterwards.

3. If Push Button is set as a secondary controller, operation of inclusion, exclusion

and association will be disabled except reset is still retained. To discharge the

role of a secondary controller, you can…

a. Have Primary Controller enter exclusion, and than put the Push Button

into inclusion mode by pressing and hold ○

I○

RKey of Push Button for 10 secs.

b. Reset the Push Button.

Door Bell

The Door Bell will stay “awake” for ten minutes when power is first supplied and four

minutes after exclusion and reset to allow time for configuration.

Choosing a Mounting Location

When choosing a suitable location for Push Button and Door Bell, the following points

should be considered.

Push Button

1. The Push Button is suitable for mounting on doorjamb of the front door or a wall.

2. Position the Push Button in an easily accessible position and outdoor only.

Door Bell

1. The Door Bell is suitable for mounting on doorjamb of the front door or a wall; it

can also be free standing for it to be placed and moved as need or in a place

where the sound can be heard clearly.

2. It is recommended to position the Door Bell indoor only in an easily accessible

position so the Bell can be connected to a computer if necessary.

Installation

Push Button

1. Insert a flat bladed screwdriver into the slot at the bottom of the Push Button.

Lever the cover and base apart (FIGURE 3).

2. Fit two 1.5V AAA batteries supplied to the battery compartment (FIGURE 4).

Please note, the adoption of alkaline battery is highly recommended as it would

last longer.

FIGURE3 FIGURE4

3. Mount the Push Button directly on to your door jamb or wall using adhesive strips

or screws provided. Make sure the surface of the doorjamb or wall is clean.

If fixing the Push Button with screws; hold the rear cover in position and drill two

mounting holes. Insert the supplied plastic wall plugs, and then screw the rear

cover to the wall using the supplied screws.

FIGURE 5

4. Refit the Push Button to the rear cover.

Door Bell

1. Insert a flat bladed screwdriver into the slot at the bottom of the Door Bell. Lever

the cover and base apart (FIGURE 6).

2. Fit three 1.5VAA batteries supplied to the battery compartment. Please note, the

adoption of alkaline battery is highly recommended as it would last longer

(FIGURE 7).

FIGURE6 FIGURE7

3. Decide to let the Bell freestanding or wall mounted. If wall mounting is

preferred…

Use the fixing template provided to mark the position of two fixing holes on

the wall. Drill two holes at the marked locations, insert the supplied plastic wall

plugs and then fit two screws into the wall plugs until almost fully home. Hang the

rear cover over these screws using the two keyhole slots (FIGURE 8).

FIGURE 8

4. Engage the Door Bell to the rear cover.

Door Bell

Fixing Template

Operation

To sound the Bell, you can press the Button of Push Button. The Red LED of Push

Button is on steadily while the signal is sending. You can also press the Music

Selector of the Door Bell to sound the Bell.

WAV is the only file type that can be played by Door Bell. To download songs to Door

Bell, please execute Door Bell.exe. Before you install the program, make sure your

computer meets or exceeds these requirements:

*Win2K / XP32 / XP64 / Vista32 / Vista64 * USB 1.1

Please follow the steps below in sequence to execute the program.

1. Plug one end of USB cable into the Bell, and the other end into an open USB port

of your computer.

2. The Door Bell.exe will auto run. If it doesn’t, please double click on Door Bell.exe

under USB drive to execute the program.

3. A user interface will display; it contains three parts of panes: Navigation Pane, List

Pane and Clipboard.

Navigation Pane: Displays a list of files those are placed on the desktop. In the

Look In drop-down list, select the folder where the songs are

stored.

List Pane: It unfolds the folder you’ve selected in Navigation Pane; a list of

songs stored in the folder is displayed.

Clipboard: A temporary storage area for selected songs. They will be

downloaded to the Bell once Download Key (as shown in

FIGURE 10) is pressed.

The table below shows a list of keys and key functions.

Key Name of Key Function

Add Add a selected song to the playlist of

Clipboard

Download Download songs from Clipboard to

Door Bell

Move Up Move selected song/songs one space

up in the playlist of Clipboard

Move Down Move selected song/songs one space

down in the playlist of Clipboard

Stop Stop playing the selected song

(Clipboard only)

Play Play the selected song

(Clipboard only)

Delete Delete a song from the playlist

(Clipboard only)

Exit Exit Door Bell.exe

Save As Save selected songs to another

directory or location

Volume Control

(Low / Mid / Hi) Adjusts the volume of songs; it

determines the volume of Door Bell

If you wish to keep the preset songs, it is recommended you make a copy of them

before carrying out the following steps. To save the preset songs, press ; to

download songs to Door Bell:

1. Select a folder where the songs are stored in Navigation Pane.

2. Select song/songs you wish to download to the Bell from List Pane.

FIGURE 9

List Pane

Clipboard

Navigation

Pane

Capacity

Indicator

Download

FIGURE 10

3. Press to add selected song/songs to the Clipboard. If storage capacity in

Clipboard has exceeded the limit, a warning indication will be shown (FIGURE 11);

likewise, you can refer to the capacity indicator for the percentage of being

occupied storage.

4. Once you’ve completed song selections, press to download selected songs

to the Bell. A saving prompt box will appear while data is saving (FIGURE 12).

FIGURE11 FIGURE12

Advanced Operation (Programming)

To following information is for someone that has some experience setting up a Z-Wave

system or someone that has computer software running a Z-Wave Controller.

Through Controller, you can enquire the current status of Door Bell or set the Door Bell

to return reports according to the settings as below.

1. Supported Z-Wave Commands

Door Bell will respond to BASIC and BINARY commands that are part of the

Z-Wave system.

1-1 BASIC_GET / SWTICH _ BINARY _GET / SENSOR_BINARY_GET

Upon receipt of the following commands from a Z-Wave Controller, the Door

Bell will report its current status (playing/ NOT playing) to the Controller.

BASIC_GET Command

[Command Class Basic, Basic Get]: enquire the current status of the Door

Bell, i.e. Door Bell is playing or not playing a song currently.

BASIC_REPORT Command

[Command Class Basic, Basic Report, Value = 0(0x00)]:report Door Bell

is not playing.

[Command Class Basic, Basic Report, Value = 255(0xFF)]: report Door

Bell is playing a song currently.

SWITCH BINARY GET Command

[Command Class Switch Binary, Switch Binary Get]: enquire the current

status of the Door Bell, i.e. Door Bell is playing or not playing a song

currently.

SWITCH BINARY REPORT Command

[Command Class Switch Binary, Switch Binary Report, Value =0(0x00)]:

report Door Bell is not playing

[Command Class Switch Binary, Switch Binary Report, Value =

255(0xFF)]: report Door Bell is playing a song currently.

SENSOR_BINARY_GET is equivalent to SWITCH_BINARY_GET;

SENSOR_BINARY_REPORT is equivalent to SWITCH_BINARY_REPORT.

SENSOR BINARY GET Command

[Command Class Sensor Binary, Sensor Binary Get]: enquire the current

status of the Door Bell, i.e. Door Bell is playing or not playing a song

currently.

SENSOR BINARY REPORT Command

[Command Class Sensor Binary, Sensor Binary Report, Value =0(0x00)]:

report Door Bell is not playing

[Command Class Sensor Binary, Sensor Binary Report, Value =

255(0xFF)]: report Door Bell is playing a song currently.

1-2 BASIC_SET / SWTICH _ BINARY _SET

Upon receipt of the following commands from a Z-Wave Controller, the Door

Bell can be set to playing / NOT playing.

[Command Class Basic, Basic Set, Value = 0(0x00)]: Set the Door Bell to

stop playing.

[Command Class Basic, Basic Set, Value = 255(0xFF)]: Set the Door Bell

to play.

[Command Class Switch Binary, Switch Binary Set, Value = 0(0x00)]:

Set the Door Bell to stop playing.

[Command Class Switch Binary, Switch Binary Set, Value = 255(0xFF)]:

Set the Door Bell to play.

1-3 BATTERY_GET / BATTERY REPORT

You can also enquire the battery status of the Bell by sending BATTERY_GET

command via controller. Once Bell receives the command, it will return

BATTERY_REPORT command.

BATTERY_REPORT Command

[Command Class Battery, Battery Report, Battery Level =20%-100%]

If it displays with a message of “Battery Level = 255(0xFF)”, it implies that the

Bell is at low battery status. Please replace the batteries as soon as

possible.

2. Z-Wave’s Groups (Association Command Class Version 2)

Door Bell can be set to send reports to associated Z-Wave devices. It supports

one association group with 5 nodes.

2-1 ASSOCIATION_GET

ASSOCIATION_GET Command

[Command Class Association, Association Get]: enquire Door Bell about

relevant information of Grouping 1.

ASSOCIATION_REPORT Command

[Command Class Association, Association Report]: report relevant

information of Grouping 1.

ASSOCIATION_GROUPING_GET Command

[Command Class Association, Association Grouping Get]: enquire how

many Groupings can be supported by the Door Bell.

ASSOCIATION_GROUPING_REPORT Command

[Command Class Association, Association Grouping Report]: report

Door Bell can support 1 Grouping.

2-2 ASSOCIATION_SET

ASSOCIATION_SET Command

[Command Class Association, Association Set]: decide which note

is/nodes are to be placed in Grouping 1.

2-4 ASSOCIATION_REMOVE (V2)

ASSOCIATION_REMOVE (V2) Command

[Command Class Association, Association Remove]: decide which note

is/nodes are to be excluded from Grouping 1 of Door Bell.

Note:

1. If the Door Bell is changing playing status (e.g. from NOT playing to playing), the

Door Bell will report its status (SENSOR_BINARY_REPORT) to nodes of

Grouping 1.

2. If battery level of Door Bell drops to an unacceptable level, the Door Bell will emit

BATTERY_REPORT “Battery Level = 255 (0xFF)” to the nodes of Grouping 1.

3. Command Class

The Door Bell supports Command Classes including…

* COMMAND_CLASS_BASIC

* COMMAND_CLASS_VERSION

* COMMAND_CLASS_BATTERY

* COMMAND_CLASS_SWTICH_BINARY

* COMMAND_CLASS_SENSOR_BINARY

* COMMAND_CLASS_ASSOCIATION_V2

* COMMAND_CLASS_MANUFACTURER_SPECIFIC

Troubleshooting

Device Symptom Possible Cause Recommendation

Run out of battery power

or does not fit batteries 1. Replace a new battery

2. Refit the battery with

correct polarity

Button or LED is

damaged

Push Button

LED indicator is

not working after

Button is

pressed The device is not

working

Call to the local service for

repair

Run out of battery power

or does not fit batteries 1. Replace a new battery

2. Refit the battery with

correct polarity

Bell doesn’t

sound after

Music Selector is

pressed The button is damaged Call to the local service for

repair

The user hasn’t logged

in to the Administrator Log in to Administrator to

execute the program

Door Bell

Door Bell.exe

cannot be

executed

Being blocked by

antivirus software or

firewall

Close the firewall or

antivirus software

Specifications

Model No.

Item

TAC06-JOEL Push Button

Battery 1.5V AAA size x 2

Range Up to 30 m line of sight

Frequency Range 868.42 MHz

Model No.

Item

TSE03-JOEL Door Bell

Power Adaptor 6V DC/600mA

Battery 1.5V AA size x 3

Range Up to 30 m line of sight

Frequency Range 868.42 MHz

*Specifications are subject to change without notice

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one of the following

measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to operate this equipment.

This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

WARNING:

Do not dispose of electrical appliances as unsorted municipal waste, use separate

collection facilities.

Contact your local government for information regarding the collection systems

available.

If electrical appliances are disposed of in landfills or dumps, hazardous substances

can leak into the groundwater and get into the food chain, damaging your health and

well-being.

When replacing old appliances with new once, the retailer is legally obligated to take

back your old appliance for disposal at least for free of charge.

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente