EEG A1452 Manuale utente
EEG A1452
SCTE-104 Inserter Frame Card
Product Manual
EEG Enterprises, Inc.
586 Main Street
Farmingdale, New York 11735
TEL: (516) 293-7472 FAX: (516) 293-7417
Copyright © EEG Enterprises, Inc. 2020
All rights reserved.
A1452 SCTE-104 Inserter Frame Card
Contents
1 Introduction 3
1.1 Product Description . . . . . . . . . . . . . . . . . . . . . . . 3
2 Installation 4
2.1 Rear Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3 A1452 Operation 6
3.1 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3.2 DashBoard Menus . . . . . . . . . . . . . . . . . . . . . . . . 6
3.2.1 System . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.2.2 SCTE-104 . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.3 Web Portal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
A General-Purpose I/O 12
B Video/Connector Specifications 13
Copyright © EEG Enterprises, Inc. 2020 1
A1452 SCTE-104 Inserter Frame Card
Copyright 2020, EEG Enterprises, Inc. All rights reserved. The
contents of this manual may not be transmitted or reproduced in
any form without the written permission of EEG.
The revision date for this manual is July 30, 2020.
2 Copyright © EEG Enterprises, Inc. 2020
A1452 SCTE-104 Inserter Frame Card
1 Introduction
1.1 Product Description
The A1452 frame card brings the SCTE-104 insertion functionality of
EEG’s industry standard Smart Encoder to the openGear®platform. The
frame card utilizes the user friendly DashBoard software, which is avail-
able for Windows, Mac and Linux operating systems and streamlines
setup of the A1452.
3
A1452 SCTE-104 Inserter Frame Card
2 Installation
2.1 Rear Module
4
A1452 SCTE-104 Inserter Frame Card
MASTER IN Master video input. Accepts SMPTE 259M
SD–SDI, SMPTE 292M HD–SDI, or SMPTE
424M 3G–Level-A SDI.
AUX IN Auxiliary video input. Unused.
MASTER OUT Program video output with relay-bypass
protection.
AUX OUT Auxiliary video output. Unused
GP IN A and GP IN B Two Molex 87831-0841 connectors, each
containing 4 GPI inputs. See Appendix A for
more information regarding GPIO usage.
GP OUT Molex 87831-0841 connector containing 4
GPI outputs. See Appendix A for more in-
formation regarding GPIO usage.
SERIAL Connector for cable containing two DB–9
(RS-232) serial ports labeled P1 and P2.
Unused.
LAN 1000-Base Ethernet port for connection to
LAN. After configuring your A1452’s net-
work settings in DashBoard (see below),
you can view the Web Configuration site for
your card by navigating to its local IP ad-
dress in your web browser.
5
A1452 SCTE-104 Inserter Frame Card
3 A1452 Operation
3.1 Front Panel
The front of the A1452 card is depicted in the following diagram:
Power LED The power LED will be green when the
card is receiving power from the frame.
USB Connectors Reserved for future use.
Video Status (AUX) This LED will be off when there is no
video present on the auxiliary input.
When HD or 3G video is present, it will
be green, and when SD video is present,
it will be orange.
Video Status (Main) This LED will be red when there is no
video present on the main input. When
HD or 3G video is present, it will be
green, and when SD video is present, it
will be orange.
3.2 DashBoard Menus
The DashBoard software is used to configure encoder settings, network-
ing, and perform additional basic configuration for the frame card. It
can be downloaded from Ross Video: https://www.rossvideo.com
Once you have successfully installed the DashBoard tool, open the pro-
gram to find information about the A1452 and to configure your card.
6
A1452 SCTE-104 Inserter Frame Card
There are two main sections in the DashBoard interface: the Status in-
formation on the left side and the Setup menu on the right side. At the
bottom of the interface, you will find the Upload button, which can be
used to upgrade your A1452’s DashBoard interface firmware, and the
Reboot button, which can be used to reboot your A1452.
The upper section on the left shows the Card State and the Connection
status, each of which has an indicator light and description of the card’s
status. There is a more detailed tab labeled Status Information below
the two basic indicators that provides information about the card’s ver-
sion and its current setup configurations.
The System Status section shows what video types are present and
the current status of the Ethernet connection. Output Status displays
the mode that the encoder is operating in; the icon will be green when
the unit is in active operating mode and will be red when the Encoder
is in Relay Bypass mode. Master Input Format displays the video type
7
A1452 SCTE-104 Inserter Frame Card
detected on the master video input, including format information for HD
video, while Auxillary Input Format indicates the video type detected on
the auxillary video input, including format information for HD video. The
Upgrade Status field displays information about whether the encoder is
currently loading an upgrade.
The lower section entitled Product displays identifying information about
the hardware and software versions of the card. This section displays
the supplier, the build number, the firmware number, and the ASW ver-
sion to identify the software installed and the serial number of the card.
The setup section in the right half of the tool is broken up into two tabs:
System and SCTE-104.
8
A1452 SCTE-104 Inserter Frame Card
3.2.1 System
The System tab contains the address settings the unit will use when con-
nected to a local network, as well as control of the relay-bypass mecha-
nism.
Insertion Selects the operating mode of the frame card and
specifies whether data is being inserted.
IP Address Selects the network address that the unit will be
assigned on your LAN.
Subnet Mask Selects the bit mask used. This should match the
bit mask used on your LAN.
Gateway Selects the address of the computer or device that
the unit will use to communicate outside of your
local network, when applicable.
9
Indice
