Connect the battery cables to your positive busbar by removing the bus bolts, inserting them
through the eyelets of the proper cable, and reseating the bolt into the busbar to 60 in-lbs/7nm.
Repeat with all positive cables.
Connect the battery cables to your negative busbar by removing the bus bolts, inserting them
through the eyelets of the proper cable, and reseating the bolt into the busbar to the correct
torque. Repeat with all negative cables.
Battery Charging8VHU'HILQHG0RGH
Once you are ready to charge your batteries, you must ensure that you use the proper settings. This will
ensure that you don't over-charge or damage your batteries.
48v
1. Bulk/Absorption: 5.2V (+/- .2V)
2. Float: 54V (+/- .2V)
3. /RZ'&FXWRII:47-44V*
4. Battery Charge Temperature Range: 32°F - 122°F
5. Battery Discharge Temperature Range: -4°F - 131°F
5
Identify the positive and negative terminals on your battery. These are labeled and color coded.
(Red for Positive, Black for Negative)
Verify you have all hardware to attach the cable properly. Check to ensure the bolt insert for the
terminal fully seats and can be tightened to the proper torque.
Connect the cables to your battery terminals by removing the terminal bolts, inserting them
through the eyelet of the proper cable, and reseating the bolt into the terminal block to the correct
torque.
DO NOT finger tighten the terminal bolts.They require a specific torque (60 in-lb/7nm) to ensure
they do not loosen during operation. Failure to properly tighten the terminal bolts can result in
serious damage and will void your warranty.
+RZWRFRQQHFW&DEOHVWRWKH%DWWHU\7HUPLQDOV
&RQQHFWLQJ<RXU%DWWHULHVWRD%XVEDU
(*UHFRPPHQGVWKDW\RXRQO\XVHDSURSHUO\VL]HGDPSUDWHGEXVEDUWRSDUDOOHOEDWWHULHVWRJHWKHU
:KDW7R([SHFW'XULQJD&KDUJH&\FOH
,WLVQRUPDOIRU/)3EDWWHULHVWKDWKDYHWKHLURZQLQWHUQDO%06DQGWKDWDUHZLUHGLQSDUDOOHOWR
GHPRQVWUDWHDIDLUO\ZLGHYDULHW\RI62&UHDGLQJVGXULQJDQ\JLYHQFKDUJHRUGLVFKDUJHF\FOH
9DULDWLRQVRIXSWRDUHFRPPRQ7KLVLVQRWFDXVHIRUFRQFHUQRULQGLFDWLRQ\RXDUHJHWWLQJ
DQ\WKLQJOHVVWKDQWKHIXOOFDSDFLW\RI\RXUSDFN7KLVLVFDXVHGE\HYHQVOLJKWYDULDWLRQVLQZLULQJ
UHVLVWDQFHWRHDFKEDWWHU\LQWHUQDOUHVLVWDQFHWHPSHUDWXUHGLIIHUHQFHVDQGYDULDWLRQVLQFHOO
PDQXIDFWXUH(YHQDVOLJKWYDULDWLRQFDXVHVRQHEDWWHU\WRWDNHPRUHRIWKHORDGRUFKDUJHIRUDZKLOH
2YHUWKHGXUDWLRQRIWKHGLVFKDUJHRUFKDUJHF\FOHWKLVZLOOEDODQFHRXWZLWKWKHODJJLQJEDWWHU\WKHQ
WDNLQJWKHORDGRUFKDUJHDWWKHRWKHUHQGRIWKHF\FOHUHVXOWLQJLQUHFRYHULQJWKHIXOOOLVWHG.:+FDSDFLW\
RIWKHSDFN7KHYROWDJHGLIIHUHQFHVFUHDWHGDVEDWWHULHVGLYHUJHLQ62&ZLOOHYHQWXDOO\FDXVHWKHPWR
FRQYHUJHDWVRPHSRLQWLQWKHF\FOH
24V
1. Bulk/Absorption: 28.1V (+/- .2V)
2. Float: 27V (+/- .2V)
3. Low DC cutoff: 23.5-22V*
4. Battery Charge Temperature Range: 32°F - 122°F
5. Battery Discharge Temperature Range: -4°F - 131°F
*depending on load - start high, lower if needed
