Contents
1. General information page
1.1 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
1.2 EC Declaration of Conformity for Machinery . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
1.3 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
2. Instructions for use
2.1 Assembly / Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
2.2 Important before start-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
2.3 Start-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
3. Service and maintenance
3.1 Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
3.2 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
4. Conditions
4.1 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
4.2 Complaints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
4.3 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
33
1. General information
With the Snow sweeper fitted to the front, and
the Salt and sand spreader behind, the Egholm
2100 clears snow and leaves a non-slip path
behind it in one workflow.
The Snow sweeper clears snow up to 15 cm
deep and follows the terrain perfectly over
inclines and other obstacles.
With the hydraulic steering the Snow sweeper is
set to the wind direction and the
adjustable sweeping direction makes it possible
to clear snow even from places where the
machine is unable to turn.
Useful tips
Tip the Snow sweeper up on the A-frame when
you do not intend to use it for a long period to
save wear on the brushes.
Wipe the snap couplings before fitting, as this
protects the hydraulic system.
Daily cleaning and maintenance will extend the
lifetime of both the machine and the tool.
