ehang GHOSTDRONE 2.0 Manuale utente
EHANG VR GOGGLES
OPERATING MANUAL
GHOSTDRONE 2.0 created by EHang, Inc.
1
English
Before using EHang VR goggles, please read the
operating manual carefully and familiarize yourself
with the operations, warnings and applications. Please
avoid improperly installing antennas, using non-propri-
etary charger or gimbal. EHang shall not bear any
liability or responsibility of the damage of the VR
goggles, the gimbal, the camera, the copter or any
other related accessories or the accidents arised from
improper use.
Disclaimer
2
EHang VR goggles features data and real-time video transmission func-
tions. While wearing the goggles, users can easily see real-time image
through head tracking as well as adjusting pitch angles of the camera
which is attached on GHOSTDRONE 2.0.
Packing List
Introduction
USB Cable*1
5.8G Antenna*1
Goggles Cleaning Cloth*1
VR Goggles*1
2.4G Antenna*1
VR Goggles Carry Case*1
3
Diagram
Back
Binocular Display Screen
Bottom
USB /
Charging Portal
AV Output
Above
5.8G
VIEW SWITCH
MENU
+
_
VISION DATA POWER CHANNEL SEARCH
2.4G
①
②
③⑩
⑨
⑧
⑦⑥⑤
④
Menu Vision Signal Channel Search
⑨⑤①
Up Data Signal ON/OFF
⑩⑥②
Down Power Indicator 2.4G Antenna Interface
⑦③
5.8G Antenna Interface Copter/ Front Camera
⑧④
USB AV OUT
4
Specifications
Weight
Power
Charging Voltage
Battery
Image Size
Interpupillary Distance
Battery Life
255 g
4.5 W
DC 5 V
3.7 V 1500 mAh
800*480
63 mm
about 60 min
Communication Bluetooth /Wi-Fi + 2.4 GHz data transmission
+ 5.8 GHz video transmission
Charging the Goggles
Please use EHang USB cable for charging. It takes about 3 hours to fully
charge the goggles.When charging through a USB adapter, the required
input current is 500 mA or higher.
USB AV OUT
Bottom
5
Charging VR Gogles (with power adapter)
Note: VR goggles can also be charged with EHang power adapter for
GHOSTDRONE 2.0. VR goggles and smart flight battery can be charged with
power adapter at the same time.
5.8G
VIEW SWITCH
MENU
+
_
VISION DATA POWER CHANNEL SEARCH
2.4G
Power Indicator Status:
Charging: Slow Flashing
Fully Charge: Off
6
Instructions
5.8G antenna2.4G antenna
1. Install 5.8G antenna and 2.4G antenna to the corresponding antenna
interfaces;
Press and hold
5.8G
VIEW SWITCH
MENU
+
_
VISION DATA POWER CHANNEL SEARCH
2.4G
2. Press and hold the power button to turn the VR goggles on. Power
indicator displays solid red.DATA signal indicator flashes blue.
7
iOS:
Android:
4. Tap “Bind” in the App, then turn on the GHOSTDRONE 2.0, data will
be showed on the App interface once binding successfully.
Note: If the image is not clear enough, press CHANNEL SEARCH button to
search again.
5. Press CHANNEL SEARCH button to automatically search for the right
channel. Vision signal indicator turns solid green from flashing when
connection is successfully established.
5.8G
VIEW SWITCH
MENU
+
_
VISION DATA POWER CHANNEL SEARCH
2.4G
Press CHANNEL SEARCH
3. Bluetooth / Wi-Fi Connection
1) Android version: Launch the App to search for Bluetooth connection. Once
the connection is established, the DATA signal indicator will display solid blue.
2) iOS version: Turn the iPhone’s Wi-Fi switch on. Once the Wi-Fi connection
is established, launch the App, then the DATA signal indicator will display solid
blue. And confirm Wi-Fi connection in App.
8
Note:
1. Press VIEW SWITCH button to switch from video transmission mode to front
camera. Users can watch the front view through the front camera. To switch
back to video transmission mode, press this button again.
2. After automatically searching the channel successfully, the channel will be
recorded and no need to search again next time.
3. It is normal to observe some white noise on the screen.
6. Choose ‘Goggles’ in settings in App before flight.
8. Press and hold the power button to turn off the VR goggles if not in use.
7. Put on the VR goggles, the gimbal
can be controlled to adjust the pitch
angle by looking up or down. Thus
users can adjust the camera angle.
Altri manuali per GHOSTDRONE 2.0
5
Indice
Altri manuali ehang Accessori
