Ehear E2 Manuale utente
1
EHEAR E2
SHENZHEN EHEAR TECHNOLOGIES CO., LTD
www.EHEAR.com.cn
User Menual For
Model E2
APP
2
EHEAR E2
Visit www.EHEAR.com.cn for more info
Notice：The User manual was according to VIDO V1.0, Guests are advised
to check our website for updates.
3
E2 Controls Overview
BOOM
Status Light (Green)
USB Port Record Button
Call Button
Record Light (Red)
Power switch
Earloop
Loop of Earbud
Earloop Base
Earbud
Instant Clip button
4
TF card cover
SLIDE
TF card
Using T-Flash Card
Maximum 64GB
5
Basic E2 Controls
Power switch
Slide to power on\/off .(Shows green when switched on.)
Record button
Press to start/stop recording.
Instant Clip button
¾Press and release to create an Instant Clip.
¾Press and hold for approximately 2 seconds to create an Instant
Clip to your instant share favorite.
Go to Settings in the EHEAR app to set up instant sharing.
Call button
¾Press to answer/end a phone call.
6
Getting Started
Charging Your E2
Charge your E2 for 2 hours before using it
the first time.
Using a Computer or Power Adapter or
Power Back
¾Power ON E2 prior to charging.
¾Plug one end of the USB Cable into
the USB Port on E2, and the other
end into a computer USB Port or a
power adapter or a power back.
Note: Average charging time is around 3 -
4 hours.
Power adapter sold separately on
www.EHEAR.com.cn
Status light (green)
¾Flashes green while
charging.
¾Stays green once the
battery is fully charged.
¾Blinks green when EHEAR
is powered on.
Record light (red)
Glows red while recording.per 3s
7
Downloading the VIDO
Apps
Use the EHEAR apps to preview, edit, and
share your video clips.
Where to Download
¾Android Market
¾www.EHEAR.com.cn
¾Your Distributor
8
Pairing E2 to Your Mobile
Device
Before pairing, make sure E2 is fully charged. Pairing VIDO to your
mobile device connects the companion apps with your VIDO.
Turn on Bluetooth (on your mobile device)
¾Turn on your mobile device’s Bluetooth
(under your mobile device’s Settings).
Activate pairing mode (on your E2)
¾Power on E2 by sliding the Power switch on.
(The green Status light turns on.)
¾if the green Status light and red Record light
are both flashing, pairing mode is active. (Go
to step 3 on next page.)
¾If the green Status light and red Record light
are not both flashing, activate pairing mode
manually: Slide the Power switch off. Then
press and hold the Call button as you slide
the Power switch on. (Both lights will flash.)
9
Select EHEAR E2 from the Bluetooth device list
¾When paired successfully, EHEAR E2
appears in your mobile device’s Bluetooth
device list as Connected. (The red Record
light will turn off and the green Status light
will blink.)
Tip: Check your mobile device’s user manual for
more information on pairing Bluetooth
devices.
Help Me Pair
When the VIDO app are launched, the Help
Me Pair screen will appear if E2 is not paired
to your mobile device. If you want help
pairing:
¾Tap Help Me Pair.
¾Follow the three steps on the next two
screens to pair E2 to your mobile device.
¾Tap Done to exit the screen.
10
Pairing E2 By VIDO App
You can pair E2 to you phone by VIDO app.
To control, download, edit, clips…
Let us rock
Push the button of power on
Use the VIDO app
Go to the settings
Touch the“searching”
Select the“EHEAR E2”from the menu
Touch the “connect”（System“Connecting
Complete”）
Check the battery life
Check the memory
Altri manuali per E2
1
Indice
