EISST H500 Manuale utente

DOCUMENT ID:UMH5-20150604-01

CLASSIFICATION:CONFIDENTIAL

VERSION:1.10

H500 USER MANUAL

EISST Ltd

26 Red Lion Square

London WC1R 4AG

United Kingdom

T: +44 (0)20 79 695 688

F: +44 (0)20 77 483 273

E: [email protected]

W: www.eisst.com

H500 USER MANUAL /CONFIDENTIAL

Last accessed: 2015-06-25

EISST Limited

26 Red Lion Square

London WC1R 4AG

This document as well as the information or material contained is copyrighted.

Any use not explicitly permitted by copyright law requires prior consent of EISST Limited.

This applies to any reproduction, revision, translation, storage on microfilm as well as its

import and processing in electronic systems, in particular.

The information or material contained in this document is property of EISST Limited and any

recipient of this document shall not disclose or divulge, directly or indirectly, this document or

the information or material contained herein without the prior written consent of EISST

Limited.

All copyrights, trademarks, patents and other rights in connection herewith are expressly

reserved to EISST Limited and no license is created hereby.

Subject to technical changes.

All brand or product names mentioned are trademarks or registered trademarks of their

respective holders.

H500 USER MANUAL /CONFIDENTIAL

Last accessed: 2015-06-25

Table of Contents

1. Technical Specifications...........................................................................2

1.1 . Supported Operating Systems......................................................................................2

1.2 . Microcontroller...............................................................................................................2

1.3 . Firmware........................................................................................................................2

1.4 . Middleware ....................................................................................................................3

1.5 . Power Supply ................................................................................................................3

1.6 . Bluetooth .......................................................................................................................3

1.7 . Physical .........................................................................................................................3

1.8 . Miscellaneous................................................................................................................3

2. H500 States & Transitions ........................................................................5

3. Operating with the H500 ...........................................................................5

3.1 . Activating Bluetooth Transmission................................................................................5

3.2 . Using the H500 as Mass Storage Device .....................................................................5

3.3 . Charging the Battery......................................................................................................5

3.4 . Recovering a Fully Discharged Battery.........................................................................6

H500 USER MANUAL /CONFIDENTIAL

Last accessed: 2015-06-25

1. TECHNICAL SPECIFICATIONS

1.1 SUPPORTED OPERATING SYSTEMS

PC based OS - USB connection:

oWindows Vista x86 and x64

oWindows 7 x86 and x64

oWindows 8 x86 and x64

oWindows 8.1 x86 and x64

oWindows 10 x86 and x64

oOSX 10.7

oOSX 10.8

oOSX 10.9

oOSX 10.10

oLinux (available upon request)

Mobile OS - Bluetooth connection:

oiOS 7

oiOS 8

oAndroid 4.x

oAndroid 5.x

oWindows Phone 8.x

1.2 MICROCONTROLLER

o32-bit Multi-AHB bus matrix for concurrent execution and data transfers

oARM Cortex M3 SoC

oReal-time 120MHz/150DMIPS zero-wait state execution from embedded flash

oART Accelerator™ with advanced prefetching queue and branch cache

oBattery backed embedded RTC with ultra-low dynamic power consumption

oUSB 2.0 High Speed support

oHardware accelerated AES, 3DES, SHA-1, MD5, HMAC

oTrue Random Number Generator

oFlexible static memory interface (Micro SD, SPI flash)

oMultiple USART, SPI, I²C, GPIO for maximum integration

oMultiple 12-bit ADC

1.3 FIRMWARE

oCustom designed with focus on security, performance and power usage

oSecure Second Level Boot loader to boot only a validly signed Firmware

oMultiple flash partitions (CD-ROM, Public, Private, Hidden, Read-only)

oAccess to Mass Storage over USB 2.0 High Speed

oCustomizable VID and PID information

oAccess to device/partition management controlled by Business Logic Module

oHigh speed AES-256 hardware encryption on Private Partition

oCustomizable User Experience with RGB LED and functional button

oCustomizable Business Logic Module

oExports cryptographic operations (AES, 3DES, SHA-1, SHA-256, RSA-1024, RSA-

2048, PKCS#1 encryption and signing, ANSI 9.31 CSRNG) via H-Token Middleware

oSecure channel with H-Token Middleware

oEncrypted File System for storing crypto keys and objects

H500 USER MANUAL /CONFIDENTIAL

Last accessed: 2015-06-25

1.4 MIDDLEWARE

oPKCS #11 v2.20 interface

oDevice management interface

oSecure channel between the PC Application and Middleware

oSecure channel between the Middleware and the Firmware

oSupport for shared access to the device from multiple Applications

oOptional Windows Service for environments where access to the USB is restricted to

system services

1.5 POWER SUPPLY

oLithium-Polymer high capacity rechargeable battery (450mAh)

oFast charging through micro USB from host PC and wall charger

oSupports USB connected mode operation while charging

oCertification for Transport of Goods (UN38.3)

1.6 BLUETOOTH

oSingle-Chip Bluetooth Solution Integrating Bluetooth

Basic Rate (BR)/Enhanced Data Rate (EDR)/

Low Energy (LE) Features fully Compliant with the Bluetooth 4.0 Specification Up to

the HCI Layer - Supports SPP (over BR/EDR) and ATT (over LE) protocols

oBest-in-Class Bluetooth (RF) performance (TX Power, RX Sensitivity, Blocking)

Class 1.5 TX Power Up to +12 dBm

Internal Temperature Detection and Compensation to Ensure

Minimal Variation in RF Performance Over Temperature, with no

External Calibration Required

Improved Adaptive Frequency Hopping (AFH) Algorithm with

Minimum Adaptation Time

oAdvanced Power Management for Extended Battery Life and Ease of Design:

On-Chip Power Management, Including Direct Connection to Battery

Low Power Consumption for Active, Standby, and Scan Bluetooth Modes

Shutdown and Sleep Modes to Minimize Power Consumption

1.7 PHYSICAL

oSize 45mm x 45mm x 11mm

oWeight 30 g –55 g

oOperation Temperature 0°C to 40°C

oStorage Temperature -10°C to 70°C

oOperation Humidity 30% to 80%

oStorage Humidity 20% to 93% (40°C)

oSequential Read Rate up to10 MB/s

oSequential Write Rate up to 4 MB/s

oMemory Endurance 10,000 Program/Erase Cycles

oData Retention JEDEC compliant

1.8 MISCELLANEOUS

oSSCD-ready port (optional)

oRGB (multi-color) LED on the front panel

oFunctional button on the front panel

oMicro USB port on the bottom side

oPower button on the top side

oFlash mass storage up to 32 GB

oUSB-IF, CE, FCC, RoHS, WEEE compliant

H500 USER MANUAL /CONFIDENTIAL

3 4

Last accessed: 2015-06-25

H500 USER MANUAL /CONFIDENTIAL

Last accessed: 2015-06-25

2. H500 STATES &TRANSITIONS

The H500 device communicates its status to the User through a combination of LED colors

and pulsing frequencies. Each LED color-frequency association is linked to one and only one

main operational state.

LED Colors

WHITE Business logic notifications

RED Battery Level notifications

ORANGE Charging notifications

BLUE Bluetooth notifications

GREEN USB notifications

LED Frequencies:

SLOW PULSE Slowly fading in-out (about 0.5 Hz)

PULSE Switching on-off (about 1 Hz)

FAST PULSE Quick blinking (about 4 Hz)

SOLID Steady

Battery Levels:

FULL: Battery is fully charged

OK: Battery has enough charge to allow extended usage

LOW: Connect to charger as soon as possible (less than 12% charge left)

EMPTY: The device cannot operate without first being fully charged

Disclaimer

The H500 device should be fully charged at least once during each 30 day interval.

Allowing the battery to fully discharge down to the EMPTY state will reduce the

battery’s lifetime and require a lengthy recover procedure (ref. section 3.4)

H500 USER MANUAL /CONFIDENTIAL

3 5

Last accessed: 2015-06-25

H500 USER MANUAL /CONFIDENTIAL

Last accessed: 2015-06-25

3. OPERATING WITH THE H500

3.1 ACTIVATING BLUETOOTH TRANSMISSION

To activate the Bluetooth mode on the H500, keep it disconnected from any other equipment.

Press the power button and release it when the LED shows a blue light.

As a result the internal Bluetooth chip and associated components will power up and bring the

device to the BT Ready state (ref. H500 States Table). The H500 device is now discoverable

as a Bluetooth device with which you can pair and connect. After about 3 minutes in BT

Ready or BT Standby modes without any connection over Bluetooth, the H500 will

automatically switch OFF to save battery.

Note:

The H500 supports both BR/EDR and BLE Bluetooth modes. However, both modes cannot

be supported at the same time. After connecting in one mode, the H500 should be turned

OFF and unpaired in order to be connected in another mode on the same device.

3.2 USING THE H500 AS MASS STORAGE DEVICE

To use the H500 in mass storage mode, connect the device to the USB port of any working

PC. When the device detects a connection over USB it will switch to USB Ready mode (ref.

H500 States Table) and the LED will start emitting a green light.

In this mode, after the required drivers are automatically loaded by the operating system, a

new mass storage 4GB partition will be mounted on the PC and become accessible for

reading/writing data. The H500 will be listed as QubiBox under the Safely Remove Hardware

option, with a VID = 261C and PID = 2300.

After about 3 minutes in USB Standby mode without reconnection, the H500 will automatically

switch OFF to save battery.

3.3 CHARGING THE BATTERY

To activate the battery charging mode, connect the device to the USB port of any working PC

or to a USB wall-charger.

While connected to the PC, the H500 will be charged only after it is properly configured and

mounted. With reference to the H500 States Table, charging will occur only in the USB Ready

and USB Active modes.

While connected to the wall charger, the H500 will start charging right away and communicate

its state as shown in the H500 States Table.

H500 USER MANUAL /CONFIDENTIAL

Last accessed: 2015-06-25

3.4 RECOVERING A FULLY DISCHARGED BATTERY

In case the battery of the H500 was left to discharge below the EMPTY state, it will need to be

recovered by connecting it to a wall-charger. In fact, the battery recovery can be performed

using only a wall charger and will continue until the power is raised at least up to the EMPTY

level.

Note:

During the recovery procedure, the LED will not light up. Please allow at least 4hrs time for

the H500 to reach the Charging Empty state and show a solid red LED light (ref. H500 States

Table).

Indice

Manuali Magazzinaggio popolari di altre marche

QNAP

QNAP TS 32PXU Series Manuale utente

LaCie

LaCie RUGGED RAID Manuale utente

Freecom

Freecom CLS DOCK Manuale utente

PNY

PNY Attache P-FD64MBATT3 Manuale utente

HP StorageWorks MSL2024 Manuale utente

OLT

OLT 6x6 Maximizer Manuale utente

Transcend

Transcend JetFlash 160 Manuale utente

LaCie

LaCie RUGGED MINI Manuale utente

Thunderbolt

Thunderbolt 600 Manuale utente

Panasonic

Panasonic LB-DH8 series Manuale

Intel

Intel RAID High Availability Manuale utente

LaCie

LaCie 12big Thunderbolt 3 Manuale utente

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuale utente

Panasonic

Panasonic LKM-F931-1 Manuale utente

Tabernus

Tabernus Enterprise Erase E2400 Manuale utente

Rocstor

Rocstor COMMANDER 3F series Manuale utente

HP P9000 Manuale utente

Western Digital

Western Digital Ultrastar Data60 Manuale utente