EKEN V5 Manuale utente
User Manual 3.1
Video Doorbell
V5
Features
1. Motion Sensor
2. Light Sensor
3. 6 Hidden Infrared Lights
4. Wide-angle Lens
5. Microphone
6. Doorbell / Reset Button
7. Indicator Light
8. Speaker
11. AC 8V~24C
Power Interface
12. Battery Door
9. Restart Button
10. Micro USB Port
For Battery Charging
OPEN
Indicator Light
Indicator light flashing RED
Indicator light flashing RED
and BLUE alternately
The device is reconnecting to the Wifi
network. Please wait.
Low battery. Please recharge your
batteries.
In the box
Video
Doorbell
5 Mounting
Screws Security Screw /
2 Hardwire Screws
Mounting
Bracket
Video
Doorbell User Manual
5 Anchors
Chime
(Optional) 3 Batteries
(Optional)
Charge batteries
WARNING: Lots of events
If your device is capturing an excessive number of events
every day, you might need to recharge your battery sooner.
Plus, the battery is also drained each time you use the Live
View to look or speak through your doorbell. To prevent
excessive events, you can adjust your motion settings to a
lower sensitivity.
1. Remove the battery tab.
3. Fully charge batteries by connecting your device to a
USB charger using a Micro USB cable. It takes about
14 hours for batteries to fully charge.
2. Insert 18650 batteries
positive end facing up,
as shown on the device.
Rechargeable 18650 Battery
Connect the wires (optional)
Connect the wires coming out of your wall to the screws
on the back of your doorbell. Either wire can connect to
either screw. The order doesn’t matter.
AC 8V~24V Bell Transformer
Set up your Video Doorbell
Aiwit Android / iOS
App Download
Before You Start
1. Download and install Aiwit App.
Scan the QR code below or search for Aiwit on the Apple
App Store or Google Play. Download and install the app.
2. Create an Aiwit account.
Set up your device in the Aiwit app.
To pair your device, follow the steps below and in-app
instructions.
1. Open Aiwit App and log in to your account.
2. To add your camera, select the +icon.
3. Select Video Doorbell.
4. Press and hold the Doorbell Button until the red light
is flashing, tap Next, then tap Yes.
5. Enter your 2.4GHz Wi-Fi network and the Wi-Fi
password, then tap Next (5GHz is not supported).
6. Use your device camera to scan the QR Code shown
on the app, then select Confirm once the Wi-Fi setup
has finished.
4 inches (10 cm)
Install your Video Doorbell
Mark drill holes and use a bit to drill holes in your wall. Insert
anchors and secure your doorbell with a security screw and
mounting screws.
Step 1
Step 2 Step 3 Step 4
Slide
Down
Tighten
The Screw
Wall Wall
Wall
Wall
Frequently asked questions
How long do my videos stay in my account?
Your videos are stored in the Free Cloud for up to 7 days.
How to RESET the doorbell
Press and hold the Doorbell Button for 8 seconds. Then
follow the in-app instructions to finish your Wi-Fi setup.
How to share the device with my family
Open the Aiwit app. From the home page, tap the Share
icon. Tap Share via Email or Share via QR Code. You can
share the device with up to 8 users.
Share via Email:
The new user has to download the Aiwit app and
create an account with the same email address which
the device owner has shared with. Log in to the
account and you'll see the shared device.
Share via QR Code:
1. Open the Aiwit App on a new user's smartphone.
2. From the home page, tap +.
3. Tap QR Code Sharing, then scan the QR code the
device owner generated before.
4. You will see Share successful, then tap Confirm.
How many users can view the video at the same time?
Up to 3 users may view the video feed, but only 1 user
can use the direct intercom. Both iOS and Android are
compatible.
Why is my Wi-Fi signal poor on my device?
Your device may be too far away from your wireless router
or you may have some obstructions in between that reduce
signal strength. You might try repositioning your router or
getting a signal extender/repeater for your wireless router.
Is 5GHz Wi-Fi supported?
No. Only 2.4GHz Wi-Fi is supported.
How to adjust Motion Detection Sensitivity
From the home page, tap the Motion Detection icon.
Motion Detection Sensitivity
• Fast: Records and notifies you about every motion.
Shortest battery life.
• Medium: Records and notifies you about motion less
often. Standard battery life.
• Slow: Records and notifies you about motion even less
often. Maximum battery life.
How to enable Notifications on my phone
To do this, you need to give permission for the Aiwit
app to access to your microphone and enable
notifications. Follow these steps to enable notifications.
1. Open Settings. Go to Aiwit app permissions and
select Notifications.
2. Make sure all switches are on.
Set up your Wireless Chime (Optional)
NOTICE:
Connect the video doorbell to the doorbell chime, and get
instant alert in your home when someone rings the doorbell.
The chime plugs into any wall outlet, you can place it
anywhere in the home.
The video doorbell is only compatible with our wireless
chime, and not compatible with traditional doorbell chimes.
The wireless chime is optional. If it is not installed, doorbell
notifications will still go directly to the Aiwit app.
The Basics
Tune
Connect
Volume
up
Volume
down
Set up your Wireless Chime (Optional)
Indice
Altri manuali EKEN Accessori
