ENGLISH
7.1.5 ENTERING THE SECURITY CO E
Press the OK button on the control panel.
Use the < and > buttons to enter the left number of the security code (factory setting is 9)
Press the OK button.
Use the < and > buttons to enter the right number of the security code (factory setting is 9)
Press the OK button.
"Eu" is shown in the display (Enroll user)
7.1.6 ENROLING A FINGERPRINT IN THE SYSTEM
A maximum of 99 fingerprints can be enrolled.
irst, enter the security code as per section 7.1.5.
7.1.6.1 ALLOCATING AUTHORISATION
When the display shows "Eu", press the OK button.
Select the user: The display shows the number "1". If this user number is already in use this is signalised
by a dot next to the number. or example: "1". Select the desired user number using the < and > buttons.
Press the OK button.
Select the finger: " 1" is shown in the display to represent fingerprint 1. Please begin counting with the
little finger on the left hand. The little finger on the right hand is number 10 (= setting " 0" on the display).
If a fingerprint number is already allocated, then this is also signalised with a dot next to the number. or
example set the index finger on the right hand as " 7".
Press the OK button.
You can now determine which relay is meant to be controlled by the previously selected fingerprint.
Select the relay: "o1" on the display signalises that at the moment the first relay (the motor lock) is
selected (standard setting). Use the < and > buttons to select the relay to be controlled and then press the
OK button. Now "E " will also appear on the display.
Options: "o1","o2","o3". Whether this selection is available depends of course on the system in
front of you. With the ekey home control panel for example, only "o1" can be selected. With the ekey home
3 control panel "o1", "o2" and "o3" can be selected. or more information see section 4.2.
7.1.6.2 RECORDING A INGERPRINT
Once "E " appears on the display you have 60 seconds to swipe your finger, starting at the top knuckle over the
sensor. The fingerprint should be recorded in the manner described in the section 8.1.Fehler! Verweisquelle
konnte nicht gefunden werden. The finger scanner possesses a (LED) status display, which signalises the
status using three different colours:
Red: The fingerprint was not able to be scanned successfully.
Please repeat the scanning process!
Orange: Enrollment mode. The device is waiting for a finger to record.
Green: Scan successful
7.1.7 ELETING A USER
irst enter the security code as per 7.1.5
7.1.7.1 SELECTING AND DELETING THE USER
Press the > button until "du" (delete user) is displayed.
Press the OK button.
Use the < and > buttons to select the desired user number to be deleted from the system.
Press the OK button.
"OK" is then shown on the display for a short time. The device then returns to normal mode.
The function "DELETE" (du) always relates to the user. It is NOT possible to delete individual fingerprints
of a user.
