EKKO EK18RF Manuale utente

SPECIFICATION

Counter balanced Electric forklift

EK18RF & EK18RFL

Introduction

In order to meet the needs of the national environmental protection request, To

reduce industrial pollution and improve productivity, we develop new series of

EK18RF & EK18RFL Type Counter Balanced Electric Forklift . on the basis of

absorption of the advantages of domestic & overseas battery truck, they are

especially suitable for cargo loading and unloading, handling, stacking, etc. for

food, bank, light textile, station, port, logistics and other enterprises.

This forklift uses advanced structures such as wide-view door frame system, EPS

steering system, new AC controller, open-type light guard, and is equipped with

high-quality motors, traction batteries and high-power pump station motors.

Therefore, it has the characteristics of superior performance, convenient

operation, wide vision, flexible steering, reliable braking, good power, low noise,

no pollution, and beautiful appearance.

This manual describes the technical parameters of the Electric Forklift, working

principle and operation, maintenance, and other aspects. It can help operators

use the truck more reasonable, make its maximum effect.

It is hoped that Operator strictly abide the regulations and the precautions in this

manual when using the truck .Carefully use them so that your truck can be in the

best working condition for long period of time to maximize its effectiveness. And

create better economic benefits.

The Statement

Our company production model EK18RF & EK18RFL Type 3960LBS Counter

Balanced Electric Forklift is a special motor vehicle used in factory ,tourist

attractions ,amusement places which is specified by “special equipment safety

supervision regulations”.

Contents

1.The General Introduction....................................................................................1

2.Proper usage ............................................................................................................2

3.Introduction of the product................................................................................4

3.1 Overview of main components.............................................................................. 4

3.2Model Overview ........................................................................................................... 4

3.3Truck schematic diagrame & Model parameters ............................................ 5

4.Operating Mechanism diagram.........................................................................7

5.Operating principle ...............................................................................................8

5.1Operation handle diagram ..................................................................................... 8

5.2Start, Traveling and stop........................................................................................... 8

5.3Lifting & Lowering....................................................................................................... 9

5.4Fork shift left & right ..............................................................................................10

5.5Fork tilt forward & backward ..........................................................................10

5.6Steering .......................................................................................................................10

5.7Emergency situations ..........................................................................................11

5.8The use of Horn and reversing Horn .............................................................11

5.9Monitor .....................................................................................................................11

5.10Operation ...............................................................................................................12

6.Electrical Schematic diagram.............................................................................. 13

7.Hydraulic Schematic diagram ............................................................................. 14

8、Maintenance and care instructions........................................................................15

8.1 Repair and Maintenance.........................................................................................15

8.2. Routine Maintenance.............................................................................................16

8.3 Professtional Maintenance Manual ....................................................................16

8.4Battery maintenance, charging and maintenance ........................................19

9.Safety Caution..............................................................................................................................28

9.1 General rule ......................................................................................................................28

9.2 Storage and transportation ........................................................................................28

9.3 Check before using.........................................................................................................29

9.4Safety operation regulation.........................................................................................29

10.Service Manual..........................................................................................................................33

10.1 Troubleshooting.............................................................................................................33

10.2 Preparation before repair ........................................................................................34

10.3 Check the amount of hydraulic oil ........................................................................34

11.4 Complete repair,the preparation before using ................................................34

11.After-sales service ............................................................................................ 35

1.The General Introduction

EK18RF & EK18RFL Type Counter Balanced Electric Forklift uses a battery

as the power source and AC motor as power to drive the truck through gear

transmission, The lifting of the fork and tilt forward & backward is driven by the

AC motor hydraulic drive to push the cylinder to lift and lower the cargo, Tilt the

cargo forward & backward and side shift . As the truck Electric motor for Lifting

and Driving .Then it has the characteristics of labor saving, high efficiency, stable

cargo operation, simple operation, safety and reliability, low noise and no

pollution.

The biggest advantage of the Counter balanced Electric Forklift is that it

adopted the optimized designed of wide view door frame, the mast and the hose

pulley group are more compact; it is not easy to block the operator's sight, the

opening size of the fork frame is enlarged, and the view is wide. The large-arc

roof guard and the optimal angle grid increase the driver’s upper vision. The

arrangement of the right-mounted joystick fully reflects the ergonomics,

improves the comfort of operation, and reduces the labor intensity of the

operators.

The service environment：

a. Altitude does not exceed 3937 ft；

b. Indoor room temperature at +5℃to +40℃；

c. When environment temperature at +40℃,the relative humidity can’t over

50%,at low temperature ,allow bigger relative humidity

d. Firm, Flat ground 。

e. It is forbidden to use this car in corrosive environment such as flammable

and explosive or acid base

2. Proper use

Please using the Counter Balanced Electric Forklift according to this

specification.

This is a stand on type Counter Balanced Electric Forklift With solenoid

valve to control truck lifting & lowering, Tilt forward and backward, and side

shift

Improper use can cause personal injury or machine damage. Operators or

operating companies need to ensure proper using,

The Truck needs to be used on a firm ,flat ,intact surface and suitable surface

the truck is designed for indoor use at room temperature from+5°C to +40°C

Use under light load without using permanent barriers or pits ,it is

forbidden to operate on the slopes .During Operation ,the goods must be placed

approximately at the center of the truck’s load center

Lifting or Carrying people is strictly prohibited , if carried goods .The goods

must fall on the lifting point 。

It is prohibited to use this truck on lifting or loading ramps.

The rated capacity is marked on the capacity label or nameplate. And the

operator must pay attention to the warming signs and safety instructions.

Operating lighting must be at least 50LUX

Modification

Any modification that may affect the truck rated capacity, stability, or safety

operations must be approved in advance by the Truck’s original manufacturer or

Its authorized Manufacturer or its successor. This includes the effects of changes

such as Braking ,steering ,Visibility, and the addition of removable accessories.

After the manufacturer or its successor approves the modification or change ,the

capacity name plate ,Label, identification marks, operation and maintenance

manual must be changed accordingly

Truck damage caused by not following Instruction will lose its warranty.

3.Introduce of the product

3.1 Overview of main components

The walking of the forklift is powered by the battery, and the DC power is

converted into AC power by the frequency conversion system, which is realized

by controlling the AC motor on the driving wheel. The AC motor converts

high-speed and low-torque into low-speed and high-torque through a gear

reducer, and finally the drive wheels perform actions. The speed of walking is

realized by the frequency conversion control of the motor speed, which is

controlled by the operating handle.

1.Main frame 2.Rotating warning light 3.Overhead guard 4.Headlight

5.Rearview mirror 6.Door frame 7.Front wheel 8.Battery

9.Driving assembly

3.2 Model overview

This manual brings together the EK18RF & EK18RFL 3960lbs counterbalanced

Electric forklift (hereinafter referred to as "forklift").

The forklift model "EK18RF & EK18RFL-18 with a rated load of 3960lbs" meets

the requirements of JB/T8452-1996 "Battery Forklift Model Preparation

Method", and "RF" is the product code.

3.3Truck schematic diagram & Model parameters

Altri manuali per EK18RF

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Carrello elevatore popolari di altre marche

Hyster

Hyster G108 Istruzioni operative

ep ESL122 Manuale utente

Cascade

Cascade D Series Manuale

Daewoo

Daewoo D35S-2 Manuale

Konecranes

Konecranes SMV 10-600B Manuale utente

Cascade

Cascade G Series Manuale utente

Manitou

Manitou MC 40 Powershift Manuale utente

Hyundai

Hyundai 50DS-7E Manuale utente

Pegasolift

Pegasolift W12 Istruzioni per il montaggio

Multi-Mover

Multi-Mover XXL 10 TO Manuale utente

Noblelift

Noblelift PT 20I Manuale

Lifter

Lifter QX 20 EVO Manuale utente

Noblelift

Noblelift SPN22 Manuale

Noblelift

Noblelift PT 27R Manuale

Noblelift

Noblelift PS30RM Manuale

Noblelift

Noblelift PS35LSL Manuale

Noblelift

Noblelift PT E30 Manuale

Still

Still CX-M 10 Manuale utente