EKO KATV10 Manuale utente
ANDROID TV DEVICE
KATV10
INSTRUCTION MANUAL
Please read this manual carefully before using, and keep it for future reference.
CONTENTS
General Safety 4
Product Overview 6
Setup 7
Remote Control 9
First Time Setup 10
Android TV - Home 14
Google Play Store 16
Google Assistant 17
Customer Helpline Last Page
4
GENERAL SAFETY
Read this manual thoroughly before you start using this product.
Store this manual, the completed warranty card, your receipt and
the product packaging.
Please follow all instructions and take notice of all warnings.
• Please beware that Dust could accumulate over time on the unit
and cause it to generate heat and or deteriorate insulation, which
in turn may result in an electrical fire.
• The product is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
young children of any age, They must be supervised product by a
person responsible for their safety.
• Batteries from the remote control must be only removed by an
adult, the adult must ensure to keep them out of reach of infants
and children. Seek medical attention immediately if a child has
swallowed a battery.
• Batteries (battery pack or batteries installed) shall not be exposed
to excessive heat such as sunshine, fire or the like.
• Please ensure to contact our call center for any repair or service
required for the products.
5
“HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.”
GENERAL SAFETY (Cont.)
Please make sure upon positioning this product, the place is:
• Not wet or damp and Well ventilated
• Away from direct sunlight or heaters.
• Away from splashes or food.
• Protected from excessive dust or grease.
• Do not install this product near heat sources such as radiators,
stoves or other audio visual equipment that produce heat.
6
PRODUCT OVERVIEW
7
SETUP
Step 1
Plug in the HDMI port of the Android TV device into the
TV HDMI port.
Step 2
Plug in the Micro USB cable (provided) into the Micro USB side of
the Android TV Device labeled as “DC 5V”.
Then plug in the USB side of Micro USB Cable into into:
1. The TV USB Port which is powered
or
2. Power Adaptor Provided.
Step 3
Once you have connected the HDMI port and Micro USB cable of the
Android TV Device, make sure to change the TV input to the HDMI
port you inserted your Android TV Device into.
Step 4
Now you can follow First time setup process of the Android TV Device.
Refer to page 8 for illustration.
8
SETUP (Cont.)
9
REMOTE CONTROL
10
FIRST TIME SETUP - RC PAIR
When you first turn on your Android TV Device.
Pairing instrucitons will appear on the screen.
Please follow the pairing and setup instructions.
1. Press and hold the LEFT + (HOME) button to
pair the remote control.
Altri manuali per KATV10
1
Indice
Altri manuali EKO Accessori TV
