EKOTEK 2WPAG Manuale dell'operatore
EkoTek Pager – Quick Instructions
Button Functions
Display
►Menu
(long press to: Exit Menu / Cancel Assist Call / Power On)
▲Up ▼Down Send Assist Call
(if enabled)
11:34 AM 12.03.07 Day
Paul Smith
No vibrate
= Training Room
Day / Night indication
Name / Message status
Alert status
Current location / Pager
status
: or . = on network
! = off network (press Menu button to search for network)
1
9261- 8524_1
EkoTek Pager – Quick Instructions
Navigating Menu from Main Screen
►Options ►Display
Font - set display font size
Backlight - backlight ON or OFF (battery saving)
Display Timeout - time before display returns to main screen
Contrast - display contrast
►Options ►Display TAuto-delete ►
Sets maximum number of messages to keep in memory
►Options ►Display TTAlert ►
Sets audible & vibrate alert for received messages
(alert for red Assist button is set by Supervisor at Hub)
►Options TTime & Date ►
Sets 12/24 hour time display
►Options TTEnable/Disable Powersave
Powersave blanks display to extend battery life
►Options TTTPower Off ►►
Switches Pager off
(Long press on Menu button to switch on)
SDisplays Archived messages
TDisplays Received messages
Accepting an Assist Message
T(to display message if not already displayed)
►View Again TAccept ►►
Rejecting an Assist Message
T(to display message if not already displayed)
►View Again TTReject ►►
Connecting to a Network
If the Pager has been taken off-network, press any black button
when in range of a network to make the Pager quickly re-join the
network (e.g. when arriving at work in the morning).
2
9261-8524_1
EkoTek Pager – Quick Instructions
Changing the Battery
DOOR
LOCK
Compliance
This product complies with the requirements of the EU Radio &
Telecommunications Terminal Equipment Directive 99/5/EC.
FCC & Industry Canada Statement of Compliance
This device complies with Part 15 of the FCC Rules and Industry
Canada Standard RSS 210.
Operation is subject to the following two conditions: (1) this device
may not cause harmful interference and (2) this device must accept
any interference that may cause undesired operation.
Unauthorised modification to this equipment will void the user's
authority to continue to operate the device within the scope of the
Industry Canada and FCC Part 15 Rules.
WEEE Directive & Product Disposal
At the end of its serviceable life, this product should not
be treated as household, or general waste. It should
be handed over to the applicable collection point for the
recycling of electrical and electronic equipment, or
returned to the supplier for disposal.
3
9261-8524_1
EkoTek Pager – Quick Instructions
Man-Down Operation (if enabled by Supervisor)
To prevent the automatic man-down alarm being sent, keep the
Pager in an inverted position (normally worn in the Pager
holster on a belt)
Dead-Man Operation (if enabled by Supervisor)
Press any of the three buttons to respond to
periodic dead-man check (audible beep) and
pervert automatic alarm generation
4
9261-8524_1
EkoTek Pager – Quick Instructions
Snatch Cord Operation (if fitted)
Later models have a snatch cord inserted in a socket on the body of
the pager. If the pager is snatched the cord disengages from the
body of the pager and an alarm is sent.
Re-inserting the snatch cord cancels the alarm.
The pager is also supplied with a small blanking plug. If the snatch
cord is not required the blanking plug can be installed in the snatch
cord socket and the snatch cord feature is then disabled.
IMPORTANT NOTE: The blanking plug is not removable by the
user.
Do not install the blanking plug unless you never intend to use
the snatch cord.
5
9261-8524_1
Indice
Altri manuali EKOTEK Cercapersone
