EKOTEK Hub Manuale utente
EkoTek Hub
USER GUIDE
For
EkoTek Hub
9261- 8276 (Issue 2.0)
EkoTek Hub
2
EkoTek Hub
CONTENTS
Introduction 5
Compliance 6
General User Information 7
EkoTek System Schematic 8
Powering Up the EkoTek Hub 9
Status and Warning Messages 10
Using the Emergency / Assist Button 11
Dead Man Alert 12
Receiving a Message 13
Reading a Message 15
Viewing a Message Again 16
Accepting, Rejecting & Deleting Two-Way Messages 17
Deleting a Message 18
Delete All Messages 20
Archiving a Message 21
Reviewing Archived Messages 22
Deleting Archived Messages 23
Delete All Archived Messages 24
Set Time and Date 25
Part No. 9261-8276 Issue 1.0 3
EkoTek Hub
Set 12/24 Hour Mode 26
Set Day / Night Mode 27
Setting the Alert Options 28
Setting the Message Display Options 29
Setting Auto Delete 31
IP Address 32
Part No. 9261-8276 Issue 1.0 4
EkoTek Hub
Introduction
The EkoTek Hub is an alphanumeric two-way messaging device,
incorporating an emergency calling/assist facility. The EkoTek Hub
is able to receive text messages, allows basic responses and
provides the ability to store messages for later viewing. The high
contrast screen is capable of displaying up to 150 characters and all
menus are displayed in plain language text. Operation of all
functions is performed via intuitive menus using 4 tactile buttons
and the Red Star button is used for assist or emergency
applications. To gain full benefit from this product please read this
guide carefully.
Function / Control Buttons
XSTÄ
Select / Enter
Button Scroll Up
Button Scroll Down
Button Emergency /
Assist Button
Select & Enter Button
Denoted by the Xsymbol, this button is used to move to and
confirm selected options within the Menu Screens and to return to
the Standby Screen when pressed for more than 1 second.
Scroll Up/Down Buttons
Denoted by the S(Up) and T(Down) Symbols. These buttons are
used to scroll up and down the Menu Screens.
Emergency & Assist Button
Denoted by the Red Star button, this can be either Single or Double
press. Operation is dependent upon product configuration.
Part No. 9261-8276 Issue 1.0 5
EkoTek Hub
Compliance
This product complies with the requirements of the EU Radio &
Telecommunications Terminal Equipment Directive 99/5/EC.
FCC & Industry Canada Statement Of Compliance
This device complies with Part 15 of the FCC Rules and Industry
Canada Standard RSS 210.
Operation is subject to the following two conditions: (1) this device
may not cause harmful interference and (2) this device must accept
any interference that may cause undesired operation.
Unauthorised modification to this equipment will void the user's
authority to continue to operate the device within the scope of the
Industry Canada and FCC Part 15 Rules.
A full technical specification for this product may be obtained from
your Multitone representative.
WEEE Directive & Product Disposal
At the end of its serviceable life, this product
should not be treated as household, or
general waste. It should be handed over to
the applicable collection point for the
recycling of electrical and electronic
equipment, or returned to the supplier for
disposal.
Part No. 9261-8276 Issue 1.0 6
EkoTek Hub
General User Information
Radio Reception
The EkoTek Hub has been designed to give optimum performance
within the coverage area of the wireless network.
Hazardous Areas
The EkoTek Hub must not be installed in areas where explosive
gas, or dust products, may be present.
EkoTek Hub Care
Protect the EkoTek Hub from liquids, extreme temperatures and
strong magnetic fields. Do not install in a place where it will be
exposed to strong sunlight.
Servicing
Should the EkoTeK Hub need repair, return it to the designated
service agent. Do not attempt to open or repair the product, as it
contains delicate components and requires specialised test
equipment.
Part No. 9261-8276 Issue 1.0 7
EkoTek Hub
EkoTek System Schematic
EkoTek
Self Organising & Repairing Wireless Mesh Network
Power
Adaptor
AC
Repeater
Wireless
Call Fob
Pager
Repeater
Repeater
Repeater
Battery Powered
Repeater to Repeater
Distance T
yp
icall
y
10 to 15m
Includes Personal
Security Alarm
Hub
With Web Server
Part No. 9261-8276 Issue 1.0 8
EkoTek Hub
Powering Up the EkoTek Hub
The EkoTek Hub is powered via a 110, 220 or 240 Volt switch mode
power supply unit. On switching on the EkoTek Hub a message will
then be displayed for three seconds, whilst self-checks are being
performed. Finally, the Standby Screen will be displayed:
12!00 AM 01.01.06 Day
No Unread Messages
An exclamation mark (!) will flash between the Hours and the
Minutes (11!34 AM). This indicates that the EkoTek Hub is in the
process of starting up. Once the EkoTek Hub has started up this
will change to a ‘period’ symbol and the EkoTek Hub will
automatically synchronise with the EkoTek network.
The 4th line of the screen will display ‘EkoTek’ once the EkoTek Hub
has initialised:
11:34 AM 12.03.07 Day
No Unread Messages
EkoTek
Part No. 9261-8276 Issue 1.0 9
EkoTek Hub
Status and Warning Messages
When the EkoTek Hub is switched on the Standby Screen is
displayed. This consists of the time and date plus additional status
and warning messages. A typical screen is shown below:
11:34 AM 12.03.07 Day
1 Unread Message
Silent
EkoTeK
The first line is the clock displaying the current time and date, the
time may be in either a 12 or 24-hour format. In the top right hand
corner the hub will display Day or Night this is used to indicate the
shift mode.
The second line displays No Unread Messages or ‘n’ Unread
Message, showing how many messages have been received but
not viewed.
The third line shows the status of the alert, Silent to warn that the
audible alert has been turned off. If nothing is displayed then the
audible alert is turned on
The fourth line normally displays the EkoTek logo, however, if the
AC power is removed and the hub is running on its internal back-up
batteries, Mains Fail is displayed.
Part No. 9261-8276 Issue 1.0 10
Indice
Altri manuali EKOTEK Sistema di sicurezza
Manuali Sistema di sicurezza popolari di altre marche
EDM
EDM Solution 6+6 Wireless-AE Manuale utente
Highway Safety Group
Highway Safety Group EA401 Manuale utente
Siren
Siren LED GSM Manuale utente
Detection Systems
Detection Systems 7090i Istruzioni per il montaggio
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuale utente
Siemens
Siemens FDM273 Manuale utente