Ektor EV-LEDFIRE Manuale utente

DRAF

1. WELCOME

Installation Instructions

CONTENTS

CODE: 01693, 01694, 01695

CODE: 01697

Thank you for choosing this quality Ektor product.

This manual is intended to help you install this

product in a way that ensures the safety of yourself

and others. Whilst this Ektor product is designed

to be installed easily, we highly recommend you

take the time to read this manual thoroughly before

commencing installation. When installed correctly

and serviced regularly, this product will provide

hassle free operation for many years.

01693 EV-LEDFIRE

01694 EV-LEDFIRE-PRO

01697 EV-LEDFIRE-PRO-B

01695 EV-LEDFIRE-ULT

1. Welcome

2. Overview

3. Safety warnings

4. Installation

5. Maintaining your Ledfire luminaire

6. Replacing the LED dish

7. Replacing the battery

8. Battery life

9. Power and battery charge

10. Wireless daughterboard

11. Self-test wiring / central battery system

12. DALI wiring / central battery system

13. Using the inverter with a switch

14. Using the inverter with a sensor

15. Accessories list

16. Lead and cable accessories

17. Changing/adding the cable set

18. Non maintained / maintained jumper

19. Discharge rating selection

20. Self-test indicator LEDs

21. Self-test / commissioning interval programming

22. Product specifications

23. Australian emergency classification

24. Spacing table

25. Construction sites

26. Testing precautions

27. Problem solving procedure

28. Warranty information

29. Compliance standards

30. Technical support and troubleshooting

MANUFACTURED

TO ISO9001

LEDFIRE / PRO / ULTIMATE EMERGENCY INSTALLATION INSTRUCTIONS

DRAF

2. OVERVIEW

Ektor Generation III platform introduces you to a new era of emergency lighting control. With years in the

making, the third generation platform builds on the Ektor product ranges’ increasing quality, reliability and

performance. In choosing this Ektor product you can be comfortable that you have the best.

Out of the box this product can be wired in any of these configurations:

• Self-testing unit

• Standalone unit

• Standalone unit controlled with a switch or sensor

• DALI controlled remote testing unit

And can be used with a central battery system (monitored and non-monitored)

An optional wireless module can be added to allow you to connect to standard Wi-Fi networks for remote

testing and reporting.

Our Ektor Generation III platform also brings class leading technology which increases performance and

reliability including:

• Smart battery charging technology which reduces power consumption up to 90% while

increasing the service life of the battery

• Smart battery conditioning to ensure the best performance from the battery

• 450V Electrolytic capacitors which increase the products reliability

• Highly efficient design to reduce fatigue on the product

For buildings requiring longer durations such as 3, 4 and 8 hours the installer can change the jumpers found

on the unit for automatic scaling of the output. Moreover should you require non-maintained or maintained

output, the installer can select this on installation.

3. SAFETY WARNINGS

1. THIS PRODUCT MUST ONLY BE INSTALLED BY A LICENSED ELECTRICIAN.

2. BEFORE COMMENCING INSTALLATION TURN OFF AND ISOLATE THE ELECTRICAL SUPPLY.

3. DO NOT ENERGISE WITH PRODUCT OPEN OR DISASSEMBLED.

4. SUPPLY VOLTAGES WITHIN PRODUCT. ISOLATE SUPPLY VOLTAGES BEFORE OPENING OR SERVICING.

5. THE ONLY USER SERVICEABLE PART IS THE BATTERY PACK.

6. DO NOT ATTEMPT TO SERVICE OTHER PARTS OF THE FITTING AS THIS WILL VOID THE WARRANTY.

7. AS THE INSTALLER, IT IS YOUR RESPONSIBILITY TO ENSURE YOU COMPLY TO ALL RELEVANT BUILDING AND SAFETY

CODES FOR EXAMPLE THE BCA, AS3000. REFER TO APPLICATION STANDARDS FOR THE RELEVANT RULES.

8. WHEN THE INSTALLATION IS COMPLETE, LEAVE THIS MANUAL WITH THE BUILDING’S OWNER(S) FOR FUTURE REFERENCE.

LEDFIRE / PRO / ULTIMATE EMERGENCY INSTALLATION INSTRUCTIONS

DRAF

4. INSTALLATION

Ektor Ledfire recessed emergency luminaires can be installed in either accessible or inaccessible ceiling cavities.

To install the Ledfire please follow the steps listed below:

1. Remove the product from the box and inspect it for any damage. If you believe the product to be

damaged or otherwise unsound, DO NOT install the product. Please pack it back into its box and return

it to the place of purchase for replacement. If the product is satisfactory, proceed with the installation.

2. Choose the dish diameter that is suitable for your application, either 140mm or 84mm. If you are

installing the 84mm dish you will have to remove the outer ring first, this is done by twisting it out of its

locking position and sliding it down the ring.

3. Drill the hole in the ceiling to suit the dish size you have chosen; 70mm cut out for the 84mm dish or

120mm for the 140mm dish. Note that this product can be installed into an existing cut out in the ceiling

ranging from 70mm to 120mm.

NOTE: The dish is to be installed

into the ceiling from below.

Pull back the two spring clips

so that they can fit through the

ceiling cut out.

Release the spring clips,

ensuring that the dish is secure

and flush up against the ceiling

NOTE: The Ledfire dish is

pre-wired. Only connect

the Ledfire dish and battery

connections into the Inverter

until a “click” is heard.

Inverter

Ledfire dish 140mm

Ledfire dish 84mm

Spring clips

Ledfire dish

Battery

Figure 1: Ledfire assembly and ceiling installation

70 mm min. for 84 mm dish

120 mm max. with ring

LEDFIRE / PRO / ULTIMATE EMERGENCY INSTALLATION INSTRUCTIONS

DRAF

7. REPLACING THE BATTERY

6. REPLACING THE LED DISH

5.MAINTAINING YOUR LEDFIRE LUMINAIRE

1. Use only the LiFePO4 battery recommended on the label found on the inverter/battery charger pack.

No other battery will work in this fitting, other than the type listed.

2. Disconnect the battery from the product and if necessary, cut cable ties to release the battery from its

mounting position.

3. Replace the battery as was previously installed and then reinstall inverter/battery pack or install as per all

relevant standard requirements.

4. Replace the Ledfire dish back into its previously mounted ceiling position and ensure the green charge

light is illuminated. Allow a few minutes for the battery to charge.

5. Allow a minimum 24 hours charging time before carrying out any discharge tests as per the

requirements in AS/NZS 2293, BCA or other relevant standards.

The LED lamp cannot be replaced if the LED is found to be faulty. The whole LED dish needs to be replaced.

When replacing the Ledfire LED dish, please follow the installation instructions shown in section 4 (page 3).

The Ektor Ledfire Emergency Luminaire is connected to an unswitched active during normal operating

conditions. When disconnected from the mains supply, the Ledfire is powered by a LiFePO4 battery operated

inverter. Due to this, care should be taken when replacing either the battery or dish.

WARNING

4. To ensure correct battery performance, it is advised to mount the battery away from any direct heat

sources such as air conditioning, heat vents, or ducts. To secure the battery, cable-tie the battery to the

inverter in the ceiling cavity.

5. Ensure the inverter/battery charging pack and batteries are mounted in accordance with the standards on

the site of installation.

6. Connect the battery pack and dish looms into the relevant sized plug adaptors on the inverter/charging

pack unit. These plugs are keyed and can only be installed one way. Ensure the plugs lock-in and are secured.

7. Connect the power to a permanent active power supply and ensure that the units are wired as per the

relevant standard requirements.

To check correct operation of the unit allow battery to charge for a few minutes, ensuring green charging LED

on the dish is constantly illuminated. When the test switch is pressed the LED light source illuminates.

LEDFIRE / PRO / ULTIMATE EMERGENCY INSTALLATION INSTRUCTIONS

DRAF

Charge

current

Max charge current Max charge voltage Savings

Cell voltage

8. BATTERY LIFE

9. POWER AND BATTERY CHARGE

To maintain the economic life of this product it is required that the battery be discharged and recharged

at least once every 6 months. The battery life can be reduced if the battery is not discharged as per the

requirements of AS/NZS 2293 or an equivalent standard. Increasing the number of duration tests above that

as defined in AS/NZS 2293 or an equivalent standard can have a positive effect on the battery performance as

long as 12 discharge cycles per year is not exceeded.

The Ektor Generation III platform uses smart battery charging technology which reduces power consumption

and increases battery life.

During the first stage of operation the battery charger charges the battery until full. Afterwards, the unit goes

into a stage which charges the battery periodically. This reduces the battery temperature and reduces the

loss of electrolytes which ultimately increases the service life of the battery. As a result of stopping the charging

process, the power consumption is reduced and only consumes 1/11th of the typical power.

The smart battery charger also offsets the charger time by a random interval to un-synchronise all the

emergency lighting in the building. This reduces the average loading on a building’s infrastructure and reduces

any impacts of surges created by turning on large numbers of products simultaneously.

Figure 2: Example of included battery

Figure 3: Smart charge rate

1 x LiFePO4 stick battery 01302 / 01303

KIT INCLUDES:

LEDFIRE / PRO / ULTIMATE EMERGENCY INSTALLATION INSTRUCTIONS

DRAF

10. WIRELESS DAUGHTERBOARD

The Ledfire inverter supports an optional wireless daughterboard. The driver must be disconnected from

mains and battery must be removed, before installing or changing any expansion module. More information

and a list of other accessories can be found in the Wireless design and installation guide. The assembly for

this part onto the inverter is shown below:

When installing the inverter with a wireless daughterboard, careful attention needs to be taken to the

positioning of the antenna. There is also the option of adding an antenna. The antenna can be mounted in a

vertical position, depending on the installation. Care should be taken to mount the antenna away from metal

objects or behind large concrete walls. More information and a list of other accessories can be found in the

wireless design and installation guide.

Figure 4: Daughterboard assembly diagram

Figure 5: Mounting position of the inverter antenna

NOTE: If possible antenna is to be

orientated vertically when mounting.

Antenna position

when suspended

Antenna when the

inverter is mounted flat

Direction to router Direction to router

Wireless daughterboard (06118)(optional)

Ledfire/Pro/Ultimate inverter (01201/01202/01203)

LEDFIRE / PRO / ULTIMATE EMERGENCY INSTALLATION INSTRUCTIONS

DRAF

11. SELF-TEST WIRING/ CENTRAL BATTERY SYSTEM

The inverter can be used in an automatic self-test mode which reduces the need for a test switch timer.

The self-test ability automatically disables if the unit is wired to DALI or the wireless daughterboard is attached.

Additionally the third generation platform can be wired to a central battery system. With this wiring the system

feedback cannot report the light status (refer to the Configurations: Status LEDs and Device Modes document.).

Figure 6: Inverter standard wiring diagram

12. DALI WIRING/ CENTRAL BATTERY SYSTEM

The Ledfire inverter supports DALI out of the box, a hardwiring diagram is shown below, optionally an

installer can order a soft wiring cable set found in section 16. The inverter also supports central battery

systems and can be monitored through DALI. When used as a central battery system the devices can be

tested with DALI.

Figure 7: Inverter DALI wiring diagram

13. USING THE INVERTER WITH A SWITCH

A mains rated switch can be wired with this product to turn ON/OFF the non-emergency light in normal use.

This does not affect operation in emergency mode.

Figure 8: Inverter switch wiring diagram

Mains rated switch

Installer wired Prewired

LEDFIRE / PRO / ULTIMATE EMERGENCY INSTALLATION INSTRUCTIONS

DRAF

14. USING THE INVERTER WITH A SENSOR

A mains rated sensor can be wired with this product to turn ON/OFF the light in normal use. This does not

affect operation in emergency mode.

Figure 9: Inverter sensor wiring diagram

15. ACCESSORIES LIST

Below are the listings of the accessories and replacements compatible with the Ledfire.

PART CODEEVOLT CODE

COMPLETE UNITS

Ledfire (White)

Ledfire Pro (White)

Ledfire Pro (Black)

Ledfire Ultimate (White)

01693

01694

01697

01695

PARTS/REPLACEMENTS

Ledfire inverter

Ledfire Pro inverter

Ledfire Ultimate inverter

Ledfire Dish (White)

Ledfire Pro Dish (White)

Ledfire Pro Dish (Black)

Ledfire Ultimate Dish (White)

Battery, Stick 1500mAh 6.4V, 2 Cell LifePO4 to suit Ledfire

Battery 3000mAH 2 Cell LiFePO4 to suit Ledfire Pro & Ult

Ledfire inverter antenna

Ledfire strain relief cover

Wireless daughterboard

Antenna extension

Easy commissioning module - DALI

Easy commissioning module - Ektor

EV-LEDFIRE

EV-LEDFIRE-PRO

EV-LEDFIRE-PRO-B

EV-LEDFIRE-ULT

EV-LEDFIRE-INV

EV-LEDFIRE-PRO-INV

EV-LEDFIRE-ULT-INV

EV-LEDFIRE-RD

EV-LEDFIRE-PRO-RD

EV-LEDFIRE-PRO-B-RD

EV-LEDFIRE-ULT-RD

EV-1500mAh-6.4V-LiFePO4

EV-3000mAh-6.4V-LiFePO4

EV-LEDFIRE-ANT

EV-LEDFIRE-EXTENSION-LOOM

EV-WIFI-DAUG

EV-ANTENNA-EXTE

EV-ECM-DALI

EV-ECM-EKTOR

01201

01202

01203

02101

02102

02104

02103

01302

01303

02111

02112

06118

06125

05304

05305

Mains rated sensor

LEDFIRE / PRO / ULTIMATE EMERGENCY INSTALLATION INSTRUCTIONS

DRAF

17. CHANGING/ADDING THE CABLE SET

Figure 10: Lead and cable accessories

Figure 11: Changing the cable set

Clip into place to connect

the inverter and wiring.

Slide the strain relief down

into it’s slot as shown on

the right.

Unscrew the safety screw.

Carefully disassemble

cover with flat blade

screwdriver.

16. LEAD AND CABLE ACCESSORIES

The following cord-sets can be ordered and attached to the inverter depending on the site requirements.

CORD-SET

STANDARD

OPERATION

PRODUCT CODE DESCRIPTION

DALI OPERATION

LENGTH

2.4M

1.4M

00709

00707

00705

00706

00710

00708

Wire By Click 5-Pin Lead L1025/5

Wieland Plug GST18I5S B1 ZR1 S PB02

CMS 5 Pin Plug Set

WAGO Plug 5-P Blue WAGO 51110475

CMS 6 Pin Plug Set

Flex and Plug (Standard)

A B C D E F

NOTE: Connector is included with the above cord-set accessories.

NOTE: If there is already

a cable set attached, this

must first be removed

Phillips

screws

LEDFIRE / PRO / ULTIMATE EMERGENCY INSTALLATION INSTRUCTIONS

DRAF

18. NON MAINTAINED / MAINTAINED JUMPER

19. DISCHARGE RATING SELECTION

A user can select the mode of operation for the Ledfire inverter. If the inverter is using a

switch input this is disregarded and not used.

The inverter supports a number of discharge ratings which can be selected by the user. The output from

the LED scales based on the discharge rating (see section 23 for output classification information).

Figure 12: Maintained/non-maintained jumper

Jumper

Figure 13: Discharge rating selection

Remove expansion cover

HOURS

INDICATOR

STATUS

B C

DESCRIPTION

1 Hour

2 Hours (default)

3 Hours

4 Hours

8 Hours

Central battery operation

N/A

NON MAINTAINED

MAINTAINED MODE

OFF

LED is only ON in

emergency

LED is ON in normal and

emergency operation

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Apparecchio di illuminazione popolari di altre marche

Emos

Emos CLASSIC ZY1431T Manuale utente

Westinghouse

Westinghouse Outdoor Lighting Fixture Manuale utente

Hedler

Hedler C 12 silent Manuale utente

Blizzard Lighting

Blizzard Lighting Puck: CSI Manuale utente

Energetic Lighting

Energetic Lighting ELYSL-5004 Series Manuale utente

Lightmaxx

Lightmaxx Shaft 5R Manuale utente

Triarch

Triarch 31083 Manuale utente

Philips

Philips 32614 Series Manuale utente

IKEA

IKEA TIVED Manuale utente

Lightolier

Lightolier LP200 Manuale utente

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH Manuale utente

Martin

Martin MAC 250 Krypton Manuale utente

Cooper Lighting

Cooper Lighting Halo L3232E Manuale utente

Stageline

Stageline ODW-2410RGBW Manuale utente

Light Sky

Light Sky Tornado Series Manuale utente

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U Manuale utente

Lightolier

Lightolier Lytespan 83ED17S Manuale utente

Lightolier

Lightolier Calculite CS8226 Manuale utente

ektor EV-LEDFIRE Manuale utente

Manuali Apparecchio di illuminazione popolari di altre marche