Ekwb EK-Pro Manuale utente

USER GUIDE

EK-Pro

CPU WB sTR Rack

Please note the installation of the product is intended to be undertaken

by an adequately trained and experienced person. You are installing the

product at your own risk. If you are not properly trained or experienced or

feel unsure about the installation procedure, please refrain from installing

the product yourself and contact our tech support for assistance. We

disclaim our liability for any damages to the product as well as incidental,

consequential, or indirect damages incurred due to improper or

inappropriate installation.

Before you start using this product, please follow these basic guidelines:

Carefully read the manual before beginning with the installation

process.

The EK Fittings require only a small amount of force to screw

them ﬁrmly in place since the liquid seal is ensured by the

rubber O-ring gaskets.

The use of corrosion inhibiting coolants is always recommended

for liquid cooling systems, and mandatory for nickel-plated

water blocks!

Do not use pure distilled water! For best results EK recommends

the use of EK-CryoFuel coolants.

Make sure to thoroughly bleed air out of your water block, or

you will not reach optimal performance.

- 3 -

TABLE OF CONTENTS

BOX CONTENTS 4

WATER BLOCK DIMENSIONS 4

TECHNICAL SPECIFICATIONS AND WATER BLOCK PARTS 5

INSTALLING THE WATER BLOCK 6

FITTINGS AND TUBING 7

TESTING THE LOOP 8

SUPPORT AND SERVICE 9

SOCIAL MEDIA 9

- 4 -

BOX CONTENTS

EK-Pro CPU WB sTR Rack

Thermal grease (1 pc)

WATER BLOCK DIMENSIONS

77 mm

89 mm

116.8 mm

85.5 mm

22.00 mm

55.00 mm

11.00 mm

- 5 -

TECHNICAL SPECIFICATIONS AND WATER BLOCK PARTS

Technical Speciﬁcation:

- CPU socket compatibility:

• AMD Socket sTRX4

• AMD Socket TR4 (Socket SP3r2)

• AMD Socket SP3

- Water block dimensions (L x H x W): 116.8 x 85.5 x 31 mm

Position EAN Description Quantity

1103563 Top plate (Acetal) 1

2100621 Jet plate 1

3100620 Metal plate 1

4100685 Coldplate (Nickel) 1

5100158 Coiled spring 4

69033 Seeger ring 4

78616 M4 PVC Washer 4

8105256 Mounting screw 4

9100663 EK - Badge 1

10 101908 Screw M3 x 8 ISO 10642 4

11 101909 Screw M4 x 8 ISO 10642 6

12 101554 OR 46 x 1.5 mm 1

13 104307 OR 72 x 2 mm 1

- 6 -

STEP 1

If already installed, please remove the motherboard from your

computer and place it on an even surface

STEP 2

Cleaning the CPU: Wipe the IHS clean using a non-abrasive cloth or

Q-tip as shown in the illustration.

INSTALLING THE WATER BLOCK

STEP 3

Applying thermal compound: Once clean, apply a line of Thermal

Compound on one edge of the IHS and use a credit card or similar to

spread it evenly.

The layer of Thermal Compound must be thin and even in thickness

over the entire surface of the IHS. Excessive or irregular application

may lead to poor performance.

Non-abrasive

cloth

IHS

STEP 3

STEP 2

- 7 -

STEP 1

EK recommends the use of EK-HFB 10 mm barb ﬁttings and EK-Tube

ZMT 10/16 mm Matte Black tubing.

The INLET port is on the right side of the water block.

The installation of the CPU water block is now complete.

STEP 1

CLAMP

TUBING

EK-HFB 10 mm

BARB FITTING

INLET

PORT

FITTINGS AND TUBING

STEP 4

Align the water block properly on the motherboard, The screws are

not positioned in a square pattern.

Before proceeding with the installation, it is mandatory

to remove the protective foil from the backside of the

water block.

Start fastening two mounting screws at a time, preferably in a cross

pattern, and do not tighten them fully until all of them are partially

screwed in. Then - using the Allen Key 2.5 mm scrrew in all four

mounting screws until you reach the end of the thread.

STEP 4

MOUNTING SCREW

ALLEN KEY 2.5 mm

COILED SPRING

MAX TORQUE:

0.6 Nm

- 8 -

To ensure the installation of EK components was successful, we

recommend you perform a 24-hour leak test.

When your loop is complete and ﬁlled with coolant, connect the

pump to a PSU outside of your system. Do not connect power to

any of the other components. Turn on the PSU and let the pump run

continuously.

Inspect all parts of the loop, and in the eventuality that coolant leaks,

ﬁx the issue and repeat the testing process. Ensure that all hardware is

dry before the system is powered on in order to prevent any damage.

TESTING THE LOOP

In case you need assistance or wish to order spare parts or a new

mounting mechanism, please contact:

https://www.ekwb.com/customer-support/

For spare parts orders, refer to the page with “TECHNICAL

SPECIFICATIONS AND WATER BLOCK PARTS” where you can ﬁnd

the EAN number of each part you might need.

Include the EAN number with quantity in your request. Mounting

Mechanism EAN can be found under “BOX CONTENTS”

Thermal pads are readily available in the EK shop

EKWaterBlocks

@EKWaterBlocks

ekwaterblocks

EKWBofﬁcial

SUPPORT AND SERVICE

SOCIAL MEDIA

Indice

Altri manuali ekwb Hardware per computer

ekwb

ekwb EK-FB EVGA X58 LE Guida

ekwb

ekwb EK-Vector FTW3 RTX 2080 Ti Manuale utente

ekwb

ekwb EK-PRO GPU WB H100 Rack - Nickel + Inox Manuale utente

ekwb

ekwb EK-FB ASUS X58 Guida

ekwb

ekwb EK-FC1080 GTX Ti FTW3 Backplate Guida

ekwb

ekwb EK-FC 5870 V2 Manuale

ekwb

ekwb EK-Supremacy Elite Edition series Manuale utente

ekwb

ekwb EK-PRO GPU WB RTX 30 0 Series Manuale utente

ekwb

ekwb EK-FB KIT GA X58 (UD7) Manuale

ekwb

ekwb EK-FC690 GTX Backplate Manuale

ekwb

ekwb EK-Vector RTX Aorus 2080Ti Manuale utente

ekwb

ekwb EK-FB ASUS Max4 Extreme Guida

ekwb

ekwb EK-Vector Radeon VII Backplate Manuale utente

ekwb

ekwb EK-Quantum Vector FTW3 RTX 3070 Manuale utente

ekwb

ekwb Velocity Manuale utente

ekwb

ekwb EK-Quantum Reaction AIO RX 6800/6900 D-RGB P240 - AMD Radeon... Manuale utente

ekwb

ekwb EK-FB KIT ASUS R5-E10 Guida

ekwb

ekwb EK-Pro GPU WB RTX 8000 - Ni + Inox Manuale utente

ekwb

ekwb EK-Vector FTW3 RTX 2080 Ti Guida

ekwb

ekwb EK-FC780 GTX HOF Series Manuale

ekwb

ekwb EK-FC460 GTX Manuale

ekwb

ekwb EK-FC1080 GTX JetStream Manuale utente

ekwb

ekwb EK-Quantum Vector Trio RTX 2080 Ti Manuale utente

ekwb

ekwb EK-MOSFET ASUS M6G Guida

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente

ekwb EK-Pro Manuale utente

Manuali Hardware per computer popolari di altre marche