Elabs AV400SV Manuale utente
INSTRUCTION MANUAL
Audio/Video
Distribution Amplifiers
AV400SV
CE labs can support many areas of your audio and video
distribution needs.
We manufacture:
• Digital Signage software and Media Players
• HD Matrix Switchers
• RF amplifiers
• HDMI and Component HD distribution amplifiers
• CAT 5 Signal Extenders
• VGA Extenders and Splitters
• and cables of all types.
See our full product line at www.celabs.net
WARRANTY
Cable Electronics, Inc. warrants this product to be free from defects in
material and workmanship, under normal use and service, for a period of
one year from the purchase by the original purchaser. If this product is
defective or malfunctions, Cable Electronics will replace or repair this unit
(at their option) within a reasonable time. No expressed or implied warranty
is made for any defects caused by immersion or exposure to liquids, abuse,
neglect, improper operation of unit, excess wear and tear and defects
resulting from unauthorized disassembly and or modification.
Document: AV400SV_manual.pdf
930_5029_01
3209 Wood Drive
Garland, TX 75041
Phone: (469) 429-9200
Toll free: (800) 767-6189
Fax: (469) 429-9205
www.celabs.net
S-video and/or composite video with left and right audio
True one to one ratio
No signal loss
Daisy chain several units for larger displays with great
picture quality
Heavy duty metal housing provides excellent shielding
Allows up to 150 ft. runs
SPECIFICATIONS
VIDEO
Gain:
2 Volt Unterminated,
1 Volt Terminated: 75 ohm +5%
Input Impedance:
75 ohms +5%
Output Impedance:
75 ohms +5%
Video Insertion Loss:
50 Hz to 10 MHz < 0.4 dB
In to Out Isolation:
50 Hz to 10 MHz 32 dB
port to port
Out to In Isolation:
50 Hz to 10 MHz 60 dB
Return Loss:
50 Hz to 10 MHz 20 dB
Video Bandwidth:
> 10 MHz
Audio Response:
> 10 MHz
AUDIO
Gain:
Unity
Input Impedance:
22 K ohm
Output Impedance:
1 K ohm
THD:
0.05% at 1.0 Volts input level
Frequency Response:
20 Hz to 100 KHz
Channel Separation:
> 75 dB @ 1 KHz
In to Out Isolation:
60 dB
Out to In Isolation:
60 dB
Signal to Noise:
100 dB (re: 2 Volts out)
A/V Input/Output Jacks:
RCA type Phono Jack
GENERAL INFORMATION
The AV400SV allows any audio/video source to distribute S-video and/or
composite video with left and right audio. The signal ratio is true one to one
with no loss from original source to four different locations. These locations
must have the same application as your audio/video source.
A. 15 Volt DC input jack at 600MA with 2.5 mm power jack. LED lights up
when power is applied.
B. Input Jacks: Connect to original source at corresponding output jacks.
Composite connections are color coded (red to red, yellow to yellow and
white to white) with S-video to S-video.
C. Output Jacks: Connect to corresponding input jacks of TVs, VCRs, etc.
SAFETY INSTRUCTIONS
Location: Avoid locations with strong vibrations, direct sunlight or intense
heat.
Avoid Electrical Shock: Do not handle power cord with wet hands; do not
expose to rain or other moisture. If liquid is spilled on unit, unplug and have
unit serviced at authorized service center. To reduce the risk of electrical
shock, do not remove cover. No user serviceable parts inside.
KEY INFORMATION
The AV400SV can be looped, cascaded or put in tandem as shown without
loss of audio/video signals. Maximum total runs using multiple amplifiers
should be limited to 150 feet for optimum performance.
A B C
Audio/Video Source
H GH ER ORMANCE
AUD O AND VIDEO
D S RIBU ION AM I IER
ou Ou pu
T ue One To One Ra o
M e 4
A T
H GH ER ORMANCE
AUD O AND VIDEO
D S RIBU ION AM I IER
ou Ou pu
T ue One To One Ra o
M e 4
A T
H GH ER ORMANCE
AUD O AND VIDEO
D S RIBU ION AM I IER
ou Ou pu
T ue One To One Ra o
M e 4
A T
Common Audio/video Sources:
VCR, CD, Satellite receiver, etc.
S-VIDEO COMPOSITE S-VIDEO
S-VIDEO COMPOSITE S-VIDEO
S-VIDEO S-VIDEO COMPOSITE S-VIDEO
Indice
Altri manuali Elabs Amplificatore
