Elation eNODE 4 Manuale utente
eNODE 4™
user manual
ELATION |
eNODE 4™
|
user manual
www.elationlighting.com 2
©2018 ELATION PROFESSIONAL all rights reserved. Information, specifications,
diagrams, images, and instructions herein are subject to change without notice. ELATION
PROFESSIONAL logo and identifying product names and numbers herein are trademarks
of ELATION PROFESSIONAL. Copyright protection claimed includes all forms and matters
of copyrightable materials and information now allowed by statutory or judicial law or
hereinafter granted. Product names used in this document may be trademarks or
registered trademarks of their respective companies and are hereby acknowledged. All
non-ELATION brands and product names are trademarks or registered trademarks of their
respective companies.
ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all
liabilities for property, equipment, building, and electrical damages, injuries to any persons,
and direct or indirect economic loss associated with the use or reliance of any information
contained within this document, and/or as a result of the improper, unsafe, insufficient and
negligent assembly, installation, rigging, and operation of this product.
Elation Professional USA | 6122 S. Eastern Ave. | Los Angeles, CA. 90040
323-582-3322 |323-832-9142 fax | www.elationlighting.com |info@elationlighting.com
Elation Professional B.V. | Junostraat 2 | 6468 EW Kerkrade, The Netherlands
+31 45 546 85 66 |+31 45 546 85 96 fax |www.elationlighting.eu |info@elationlighting.eu
DOCUMENT VERSION
Due to additional product features and/or enhancements, an updated
version of this document may be available online.
Please check www.elationlighting.com for the latest revision/update of
this manual, before beginning installation and/or programming.
Date Document
Version
Software
Version ≥Notes
02/12/18 2 v1.6 Updated release. Supports Art-Net 3 and sACN protocols.
3www.elationlighting.com
CONTENTS
General Information
4
Warranty
6
Safety Instructions and Guidelines
7
Overview
9
Installation
10
System Menu
11
Setting DMX Ports
14
Technical Specifications
15
Optional Accessories
17
www.elationlighting.com 4
GENERAL INFORMATION
INTRODUCTION
This device has been designed to perform reliably for years when the guidelines in this
booklet are followed. Please read and understand the instructions in this manual
carefully and thoroughly before attempting to operate this device. These instructions
contain important information regarding safety during use and maintenance.
UNPACKING
Every device has been thoroughly tested and has been shipped in perfect operating
condition. Carefully check the shipping carton for damage that may have occurred
during shipping. If the carton appears to be damaged, carefully inspect device for
damage and be sure all accessories necessary to operate the unit have arrived intact. In
the event damage has been found or parts are missing, please contact our customer
support team for further instructions. Please do not return this device to your dealer
without first contacting customer support at the number listed below. Please do not
discard the shipping carton in the trash. Please recycle whenever possible.
BOX CONTENTS
powerCON Power Cable
Mini Omega Bracket (for truss/clamp mounting)
5www.elationlighting.com
CUSTOMER SUPPORT
Elation Professional®provides a customer support line, to provide set up help and to
answer any question should you encounter problems during your set up or initial
operation. You may also visit us on the web at www.elationlighting.com for any
comments or suggestions. For service related issue please contact Elation
Professional®.
ELATION SERVICE USA - Monday - Friday 8:00am to 5:00pm PST
Voice: 323-582-3322 Fax: 323-832-9142
E-mail: [email protected]
ELATION SERVICE EUROPE - Monday - Friday 08:30 to 17:00 CET
Voice: +31 45 546 85 30 Fax: +31 45 546 85 96
E-mail: [email protected]
WARRANTY RETURNS
All returned service items whether under warranty or not, must be freight pre-paid and
accompany a return authorization (R.A.) number. The R.A. number must be clearly
written on the outside of the return package. A brief description of the problem as well
as the R.A. number must also be written down on a piece of paper and included in the
shipping container. If the unit is under warranty, you must provide a copy of your proof
of purchase invoice. Items returned without a R.A. number clearly marked on the
outside of the package will be refused and returned at customer’s expense. You may
obtain a R.A. number by contacting customer support.
IMPORTANT NOTICE!
There are no user serviceable parts inside this device. Do not attempt any repairs
yourself; doing so will void your manufactures warranty. Damages resulting from
modifications to this device and/or the disregard of safety and general user
instructions found in this user manual void the manufactures warranty and are not
subject to any warranty claims and/or repairs.
www.elationlighting.com 6
LIMITED WARRANTY
A. Elation Professional® hereby warrants, to the original purchaser, Elation Professional® products to be
free of manufacturing defects in material and workmanship for a period of two years (730 days), and Elation
Professional® product rechargeable batteries to be free of manufacturing defects in material and
workmanship for a period of six months (180 days), from the original date of purchase. This warranty excludes
discharge lamps and all product accessories. This warranty shall be valid only if the product is purchased
within the United States of America, including possessions and territories. It is the owner’s responsibility to
establish the date and place of purchase by acceptable evidence, at the time service is sought.
B. For warranty service, send the product only to the Elation Professional® factory. All shipping charges
must be pre-paid. If the requested repairs or service (including parts replacement) are within the terms of this
warranty, Elation Professional® will pay return shipping charges only to a designated point within the United
States. If any product is sent, it must be shipped in its original package and packaging material. No
accessories should be shipped with the product. If any accessories are shipped with the product, Elation
Professional® shall have no liability what so ever for loss and/or or damage to any such accessories, nor for
the safe return thereof.
C. This warranty is void if the product serial number and/or labels are altered or removed; if the product is
modified in any manner which Elation Professional® concludes, after inspection, affects the reliability of the
product; if the product has been repaired or serviced by anyone other than the Elation Professional® factory
unless prior written authorization was issued to purchaser by Elation Professional®; if the product is damaged
because not properly maintained as set forth in the product instructions, guidelines and/or user manual.
D. This is not a service contract, and this warranty does not include any maintenance, cleaning or periodic
check-up. During the periods as specified above, Elation Professional® will replace defective parts at its
expense, and will absorb all expenses for warranty service and repair labor by reason of defects in material or
workmanship. The sole responsibility of Elation Professional® under this warranty shall be limited to the
repair of the product, or replacement thereof, including parts, at the sole discretion of Elation Professional®.
All products covered by this warranty were manufactured after January 1, 1990, and bare identifying marks to
that effect.
E. Elation Professional® reserves the right to make changes in design and/or performance improvements
upon its products without any obligation to include these changes in any products theretofore manufactured.
F. No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with
the products described above. Except to the extent prohibited by applicable law, all implied warranties made
by Elation Professional® in connection with this product, including warranties of merchantability or fitness,
are limited in duration to the warranty periods set forth above. And no warranties, whether expressed or
implied, including warranties of merchantability or fitness, shall apply to this product after said periods have
expired. The consumer’s and/or dealer’s sole remedy shall be such repair or replacement as is expressly
provided above; and under no circumstances shall Elation Professional® be liable for any loss and/or damage,
direct and/or consequential, arising out of the use of, and/or the inability to use, this product.
G. This warranty is the only written warranty applicable to Elation Professional® products and supersedes all
prior warranties and written descriptions of warranty terms and conditions heretofore published.
7www.elationlighting.com
SAFETY INSTRUCTIONS AND GUIDELINES
This device is a sophisticated piece of electronic equipment. To guarantee a smooth
operation, it is important to follow all instructions and guidelines in this manual. The
manufacturer of this device is not responsible for injury and/or damages resulting from the
misuse of this device due to the disregard of the information printed in this manual. Only
qualified and/or certified personnel should perform installation of this device. Any
modifications to the device will void the original manufactures warranty and increase the risk of
damage and/or personal injury.
PROTECTION CLASS 1 - DEVICE MUST BE PROPERLY GROUNDED
ELECTRICAL CONNECTIONS BY QUALIFIED PERSONNEL ONLY!
INDOORS USE ONLY!
DO NOT EXPOSE DEVICE RAIN AND MOISTURE!
DO NOT PLUG DEVICE INTO A DIMMER PACK!
NEVER OPEN THIS DEVICE WHILE IN USE!
UNPLUG POWER BEFORE SERVICING DEVICE!
KEEP FLAMMABLE MATERIALS AWAY FROM DEVICE!
DO NOT EXPOSE DEVICE TO HEAT OR FIRE!
AMBIENT TEMPERATURES: MAX 45°C/113°F | MIN 2°C/35°F
DO NOT EXPOSE DEVICE TO FLAMMABLE MATERIALS!
DO NOT EXPOSE DEVICE TO HIGH HUMIDITY!
DO NOT EXPOSE DEVICE TO EXTREME VIBRATIONS!
www.elationlighting.com 8
SAFETY INSTRUCTIONS AND GUIDELINES
DO NOT shake device, avoid brute force when installing and/or operating.
DO NOT operate fixture if the power cord has become frayed, crimped, damaged
and/or if any of the power cord connectors are damaged and do not insert into the
fixture securely with ease. NEVER force a power cord connector into the fixture. If the
power cord or any of its connectors are damaged, replace it immediately with a new one
of similar power rating.
DO NOT block any air ventilation slots. All fan and air inlets must remain clean and
never blocked.
Always disconnect device from main power source before performing any type of
service and/or cleaning procedure. Only handle the power cord by the plug end, never
pull out the plug by tugging the wire portion of the cord.
Use the original packaging and materials to transport the device in for service.
9www.elationlighting.com
OVERVIEW
1. Power Switch (On/Off)
2. Power ON LED Indicator
3. Network Link LED Indicator
4. Network Activity LED Indicator
5. LCD Control Menu Display
6. Encoder Wheel
7. RJ45 Ethernet Input
8. RJ45 Ethernet Thru Output
9. 5pin DMX Assignable Input or Output Ports 1-4 (with LED indicators)
10. Fuse
11. powerCON Cable Input
www.elationlighting.com 10
INSTALLATION
FLAMMABLE MATERIAL WARNING
Keep device at least 5.0 feet (1.5m) away from any
flammable materials, decorations, pyrotechnics, etc.
ELECTRICAL CONNECTIONS
A qualified electrician should be used for all
electrical connections and/or installations.
DO NOT INSTALL THE DEVICE IF YOU ARE NOT QUALIFIED TO DO SO!
DO NOT CONNECT DEVICE TO A CIRCULAR NETWORK! DOING SO WILL
ADVERSELY IMPACT THE PERFORMANCE OF THE ENTIRE NETWORK SYSTEM!
Device MUST be installed following all local, national, and country commercial electrical
and construction codes and regulations.
Ambient operating temperature range for this device is 35° to 113°F. (2° to 45°C)
DO NOT use the device under or above this temperature range.
DO NOT install the device in areas were unauthorized personnel might reach the device.
MINI OMEGA BRACKET / CLAMP INSTALLATION
To attach device to truss, connect the included Mini Omega Bracket to the bottom of
device and secure both thumb screws. Attach a properly rated clamp (not included) to the
Mini Omega Bracket and attached device to truss.
INSTALLATION LOCATION ON TRUSS MUST BE CLEAR OF ANY MOVING HEAD FIXTURES!
Indice
Altri manuali Elation Controllori
Elation
Elation PIXEL DRIVER 1000IP Manuale utente
Elation
Elation SDC-6 V2 Manuale utente
Elation
Elation SDC12 Manuale utente
Elation
Elation E-Node 8 Manuale utente
Elation
Elation STAGE SETTER-8 Manuale utente
Elation
Elation ART SSC Manuale utente
Elation
Elation DMX PARTNER 1.0 24-004-1631 Manuale utente
Elation
Elation SDC12 Manuale utente
Elation
Elation T4 Manuale utente
Elation
Elation PIXEL DRIVER 4000 Manuale utente
